DSPIC33FJ64GP206A-I/PT - 16-bit DSC 40MIPS 64KB | Microchip
부품 번호: DSPIC33FJ64GP206A-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33FJ64GP206A-I/PT 개요
A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic interrupt architecture of a microcontroller. Within the embedded-control hierarchy, the DSC sits between general-purpose MCUs (such as PIC24) and dedicated DSPs; the dsPIC33F family executes digital filter algorithms and high-speed precision control loops, and offers seamless migration to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages.
Key features include a 16-bit fixed-point DSP engine with a barrel shifter, 40 MIPS maximum clock frequency, 64 KB Flash and support for fixed-point arithmetic. The GP (General Purpose) family variant with codec interfaces is well-suited to speech and audio processing. Multiple PGECx/PGEDx pin pairs support in-circuit serial programming (ICSP).
Architecturally, the dsPIC33F core uses a modified Harvard pipeline with dedicated DSP multiply-accumulate hardware and a barrel shifter, enabling single-cycle MAC operations for FIR/IIR filtering and PID control. The A-suffix silicon revision provides refined analog peripherals and improved electrical characteristics over the original dsPIC33FJ64GP206.
Typical applications include digital power conversion, motor control, speech and audio processing, and precision closed-loop industrial control where 40 MIPS and hardware DSP acceleration reduce loop latency.
Design consideration: connect all VDD and VSS pins; per Microchip documentation, omitting even one supply pin pair can cause ICSP programming to fail, and PGECx/PGEDx must be used as matched pairs.
This page synthesizes distributor availability, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: DSPIC33FJ64GP206A-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33FJ64GP206A-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, Operating Temperature, DSP Features, Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33FJ64GP206A-E/PT
✅ 드롭인✓ 재고 있음
$5.2 / 개
데이터시트 보기 →DSPIC33FJ32GP206A-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ128GP206A-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ256GP206A-I/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ64GP204T-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.1 / 개
데이터시트 보기 →DSPIC33FJ64GP206A-I/PT 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC33F DSC (MCU/DSP) |
| 최대 클록 주파수 | 40 MHz (40 MIPS) |
| Program Memory Size | 64 KB Flash |
| Supply Voltage (Nominal) | 3.3 V |
| 동작 온도 범위 | -40C to +85C (I grade) |
| 패키지 | 64-TQFP (10x10 mm), 0.5 mm pitch |
| 실장 유형 | Surface Mount |
| Technology | CMOS |
| Arithmetic Support | Fixed-point, DSP engine with barrel shifter |
| Programming Interface | ICSP via PGECx/PGEDx pairs |
| Family | dsPIC33FJXXXGPX06A/X08A/X10A (General Purpose) |
| Automotive Recommendation | Recommended for automotive design (special ordering codes for automotive grade) |
| 수명 주기 상태 | In Production |
DSPIC33FJ64GP206A-I/PT 64-tqfp (10x10 mm), 0.5 mm pitch 핀 구성 가이드
DSPIC33FJ64GP206A-I/PT(64-tqfp (10x10 mm), 0.5 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33FJ64GP206A-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33FJ64GP206A-I/PT 적합 용도: 6 애플리케이션s: Digital Power Conversion, Motor Control (BLDC/PMSM/ACIM), Speech and Audio Processing, Precision Industrial Control Loops, Automotive Auxiliary Systems, Embedded Sensing and Data Acquisition.
Digital Power Conversion
The DSPIC33FJ64GP206A-I/PT fits digital power supplies, PFC stages, and LLC resonant converters because its 40 MIPS core closes current-mode control loops with cycle-by-cycle latency far below what a general-purpose MCU achieves. The fixed-point DSP engine executes the PID and compensator math in few cycles, leaving CPU margin for housekeeping and communication. Placed as the loop controller with PWM outputs driving gate drivers, it replaces analog compensators with programmable, tunable firmware. The industrial -40C to +85C rating suits PSU environments; the trade-off is that loop bandwidth is limited by the 40 MIPS budget at very high switching frequencies.
추천
Motor Control (BLDC/PMSM/ACIM)
Field-oriented control of PMSM and sensorless BLDC drives demand fast fixed-point math and deterministic PWM, which the dsPIC33F core delivers at 40 MIPS with its single-cycle MAC and barrel shifter. The DSPIC33FJ64GP206A runs the FOC loop plus startup, protection, and communication concurrently within its 64 KB Flash. Used as the drive controller feeding a three-phase inverter gate-driver stage, it supports current sensing into its analog inputs for torque control. Microchip provides reference designs for this family; verify ADC sampling alignment with PWM for best current measurement accuracy at high electrical speeds.
추천
Speech and Audio Processing
Microchip states that dsPIC33F General Purpose controllers with codec interfaces are well-suited for speech and audio processing. The DSPIC33FJ64GP206A supplies 40 MIPS for real-time FIR/IIR filtering, echo cancellation, and speech coding, with 64 KB Flash storing algorithm and coefficient tables. Interfaced to an audio codec over its serial interfaces, it acts as a standalone DSP audio path or a preprocessing front-end; unlike a general MCU it offloads filter arithmetic to the DSP engine, preserving deterministic sample-rate deadlines. Memory is the main constraint - large reverb or multi-channel algorithms may need the 128 KB or 256 KB GP206A pin-mates.
추천
Precision Industrial Control Loops
High-speed precision digital control loops - pressure, flow, temperature cascades, and servo axes - benefit from the dsPIC33F design goal of executing filter algorithms and control loops under pressure. The DSPIC33FJ64GP206A samples sensor inputs into its ADC, runs compensator code on the DSP engine, and outputs control updates deterministically at 40 MIPS. Its -40C to +85C industrial rating and 3.3V I/O integrate with standard industrial logic levels. In multi-loop systems, interrupt priority configuration is the key design lever; budget cycles per loop and reserve headroom for fault handlers to guarantee worst-case latency.
추천
Automotive Auxiliary Systems
Microchip recommends the dsPIC33FJ64GP206A for design into automotive applications, with special ordering codes applying for automotive-grade versions. Typical non-powertrain uses include pump controllers, valve actuation, sensor conditioning nodes, and lighting control, where the 40 MIPS DSP engine handles sensor filtering and the industrial temperature foundation maps onto under-hood module requirements when the automotive ordering code is selected. Design teams should qualify the automotive-grade ordering P/N, apply AEC-oriented design reviews, and use the standard -I/PT part only for prototype and non-automotive builds to avoid qualification gaps.
추천
Embedded Sensing and Data Acquisition
As a compact acquisition controller, the DSPIC33FJ64GP206A digitizes multi-channel sensor inputs with its on-chip analog peripherals, applies digital filtering on the DSP engine at 40 MIPS, and streams results over its serial communication interfaces. The 64 KB Flash accommodates calibration tables, a small command interpreter, and firmware update code. In a typical node it sits between analog front-end conditioning and a system host, offloading timing-critical filtering so the host runs application logic. Pay attention to ADC reference stability and PCB grounding - sensor accuracy is usually limited by analog layout, not by the DSC's 16-bit computation.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33FJ64GP206A-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33FJ64GP206A-E/PT | DSPIC33FJ32GP206A-I/PT | DSPIC33FJ128GP206A-I/PT | DSPIC33FJ256GP206A-I/PT |
|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 64 KB | 64 KB | 32 KB | 128 KB | 256 KB |
| Max Clock / MIPS | 40 MHz / 40 MIPS | 40 MHz / 40 MIPS | 40 MHz / 40 MIPS | 40 MHz / 40 MIPS | 40 MHz / 40 MIPS |
| Supply Voltage | 3.3 V nominal | 3.3 V nominal | 3.3 V nominal | 3.3 V nominal | 3.3 V nominal |
| Temperature Range | -40C to +85C (I) | Extended (E) grade | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| DSP Engine / Barrel Shifter | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Industry-standard -40C to +85C industrial grade with drop-in extended-temp upgrade (vs DSPIC33FJ64GP206A-E/PT)
- Balanced 64 KB Flash for cost vs headroom (vs DSPIC33FJ128GP206A-I/PT)
- Full 64 KB at 40 MIPS for audio-grade filtering (vs DSPIC33FJ32GP206A-I/PT)
설계 노트
Programming and connectivity rules from Microchip documentation: the dsPIC33FJ64GP206A has more than one PGECx/PGEDx pair, and whichever pair you use must be used as a matched pair - if PGEC2 drives ICSPCLK, ICSPDAT must come from PGED2. Additionally, ALL VDD and VSS pins must be connected; the datasheet explicitly warns that leaving even one supply pin unconnected can cause programming to fail. Verify these connections on every prototype spin before committing to ICSP-based production programming.
The 64-TQFP uses a 0.5 mm pitch, so specify a solder-mask-defined or non-solder-mask-defined pad per Microchip's package outline drawing and follow IPC-recommended TQFP land patterns. Provide a solid ground plane under the device, place 100 nF ceramic decoupling capacitors at each VDD/VSS pair with short traces, and keep the ICSP (PGECx/PGEDx) header traces short and away from switching nodes. Estimated: 0.5 mm pitch leaves ~0.25 mm between pads, so check your fab's minimum solder mask dam capability before release.
The device operates from a 3.3 V nominal supply; power it from a clean LDO or buck output with adequate decoupling, and respect the ADC reference requirements when using the analog peripherals for precision sampling. Estimated: analog accuracy is dominated by reference noise, so add dedicated RC filtering on the reference/AVDD path. If migrating to the -E/PT extended-temperature variant, re-verify supply ripple limits at the extreme ambient temperature in your enclosure thermal analysis.
규정 준수 정보
Microchip product page states the device is recommended for automotive design, with special ordering codes for automotive grade versions; explicit RoHS/REACH/lead-free declarations were not present in the provided verified data.
