DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip
부품 번호: DSPIC33FJ64MC710A-I/PF ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.24 | $8.24 |
| 10 | $7.66 | $76.60 |
| 100 | $7.02 | $702.00 |
| 500 | $6.45 | $3,225.00 |
| 1,000 | $5.92 | $5,920.00 |
DSPIC33FJ64MC710A-I/PF 개요
A Digital Signal Controller combines the computational throughput of a DSP engine with the peripheral integration and deterministic interrupt architecture of a microcontroller. In the embedded systems hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution that executes both C-based control code and math-intensive loops such as PID and field-oriented control.
Key features include a modified Harvard architecture with a 16-bit RISC core, 40 MHz maximum operating frequency (40 MIPS), dedicated DSP engine with 17-bit x 17-bit single-cycle MAC, two 40-bit accumulators, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The A revision (suffix A) adds enhanced peripherals and improved electrical characteristics over the original dsPIC33FJ64MC710.
Technical depth: the device integrates motor-control-oriented peripherals including a motor control PWM module with complementary outputs and dead-time control, multiple UART, SPI and I2C ports, a CAN 2.0B controller, a high-speed 10-bit ADC capable of simultaneous multi-channel sampling, and an internal fast RC oscillator for crystal-less operation. Operating supply range is 3V to 3.6V (3.3V nominal).
Typical applications include brushless DC (BLDC) motor control, single and 3-phase induction motor drives, switched reluctance motor control, uninterruptible power supplies (UPS), and digital power conversion where the CAN bus supports automotive and industrial networking.
Design consideration: at 40 MIPS, ensure adequate decoupling on every VDD/VSS pair and route the PWM outputs with dead-time margins verified against gate driver propagation delays.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: DSPIC33FJ64MC710A-I/PF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33FJ64MC710A-I/PF (동일 폼 팩터 및 풋프린트) — 차이점: Package, Supply Voltage, Operating Temperature, ADC, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33FJ128MC710A-I/PF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.45 / 개
데이터시트 보기 →DSPIC33FJ256MC710A-I/PF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$9.1 / 개
데이터시트 보기 →DSPIC33FJ64MC710-I/PF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ64GP710A-I/PF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.78 / 개
데이터시트 보기 →DSPIC33FJ256MC510A-I/PF
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33FJ256MC510T-I/PF
✅ 드롭인✓ 재고 있음
$6.65 / 개
데이터시트 보기 →DSPIC33FJ64MC710A-I/PF 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC33F RISC (Modified Harvard) |
| Max CPU Speed | 40 MIPS (40 MHz) |
| Flash Program Memory | 64 KB (64K x 8) |
| Data RAM | 16 KB |
| 공급 전압 | 3 V to 3.6 V (3.3 V nominal) |
| 동작 온도 | -40C to +85C (I grade) |
| 패키지 | TQFP-100 (14x14 mm) |
| 실장 유형 | Surface Mount (SMD/SMT) |
| Packaging | Tray |
| Qualification | AEC-Q100 automotive |
| DSP Engine | 17x17-bit single-cycle MAC, two 40-bit accumulators |
| Communication Interfaces | UART, SPI, I2C, CAN 2.0B |
| ADC | 10-bit high-speed ADC, multi-channel simultaneous sampling |
| Motor Control PWM | Dedicated MCPWM with complementary outputs and dead-time control |
| Oscillator | External crystal, PLL, and internal fast RC |
| Series | dsPIC33FJ64MC710A (Motor Control family) |
DSPIC33FJ64MC710A-I/PF tqfp-100 (14x14 mm) 핀 구성 가이드
DSPIC33FJ64MC710A-I/PF(tqfp-100 (14x14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33FJ64MC710A-I/PF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33FJ64MC710A-I/PF 적합 용도: 6 애플리케이션s: Brushless DC (BLDC) Motor Control, Single and 3-Phase Induction Motor Drives, Switched Reluctance Motor Control, Uninterruptible Power Supplies (UPS), Automotive Motor and Body Control Units, Industrial Automation and Fieldbus Nodes.
Brushless DC (BLDC) Motor Control
The DSPIC33FJ64MC710A-I/PF is purpose-built for BLDC drives: Microchip lists brushless DC motors as a primary target application for this family. The dedicated motor control PWM module generates three complementary half-bridge outputs with programmable dead time, while the 10-bit high-speed ADC samples phase currents simultaneously so FOC or trapezoidal commutation loops close within the 40 MIPS budget. In a typical 3.3V control board, the DSC reads hall or encoder feedback, executes the current/speed cascade in a single PWM interrupt, and reports status over CAN or UART. The DSP engine's single-cycle 17x17-bit MAC accelerates Park/Clarke transforms and PI controllers, allowing higher switching frequencies than a general-purpose MCU with equal load.
추천
Single and 3-Phase Induction Motor Drives
Microchip identifies single and 3-phase induction motor control as a core application of the dsPIC33FJ64MC710A family. For induction drives, the controller generates a variable-frequency PWM voltage source using the motor control PWM module with dead-time insertion, and computes slip-compensated V/f or rotor-field-oriented control using the DSP MAC engine. The 64KB flash holds the full control stack plus modulation tables, and the 16KB RAM buffers current samples for diagnostics. Industrial drives benefit from the AEC-Q100-qualified silicon margin and the CAN 2.0B controller for fieldbus integration into SCADA or PLC networks without an external CAN controller chip.
추천
Switched Reluctance Motor Control
The dsPIC33FJ64MC710A supports switched reluctance (SR) motor control, another application class Microchip explicitly names for this family. SR drives require asymmetric half-bridge topologies with per-phase current chopping and precise phase-angle firing, which the flexible motor control PWM module handles via complementary outputs, programmable dead time, and individual output overrides. The high-speed 10-bit ADC's simultaneous multi-channel sampling captures per-phase current at PWM-rate, and the 40 MIPS core executes torque-sharing algorithms in real time. Because SR control tolerates simple rotor position sensing, the dsPIC33F's rich capture/compare (ICx) inputs resolve low-resolution position feedback into commutation events.
추천
Uninterruptible Power Supplies (UPS)
Microchip notes the dsPIC33F Motor Control products are also well-suited for UPS and inverter applications. A DSPIC33FJ64MC710A-based UPS generates a sine-wave output via the motor control PWM module with dead-band, samples AC line, battery and output voltages through the 10-bit high-speed ADC in simultaneous mode, and closes the inverter control loop at switching frequency using the DSP MAC for the digital PID and resonant controllers. The CAN 2.0B and multiple UARTs provide connectivity to battery management and network monitoring, while 64KB flash retains firmware and calibration tables with headroom for field updates. AEC-Q100 qualification adds robustness margin for industrial power environments.
추천
Automotive Motor and Body Control Units
Because the DSPIC33FJ64MC710A-I/PF is AEC-Q100 qualified and rated -40C to +85C (the I temperature grade), it fits automotive auxiliary motor control such as pumps, blowers, throttle actuators, and window/seat drives. The integrated CAN 2.0B controller connects the node directly to the vehicle network without an external CAN controller, reducing BOM cost and latency. The internal fast RC oscillator allows crystal-less startup for cost-sensitive nodes, while deterministic interrupt latency supports safety-relevant current-limiting loops. Seamless migration to PIC24 and dsPIC30F packages (per Microchip) lets Tier-1 suppliers scale a platform across 64/80/100-pin variants while reusing firmware.
추천
Industrial Automation and Fieldbus Nodes
With UART, SPI, I2C, and CAN 2.0B on board plus up to 85 I/O on the 100-pin TQFP, the DSPIC33FJ64MC710A acts as a compact industrial automation controller: motorized actuators, conveyor motion stages, and sensor-hub nodes. The 40 MIPS core and DSP engine handle filtering and control math, the 10-bit ADC digitizes analog sensor channels, and remappable peripheral pins simplify board routing across product variants. Migration compatibility with PIC24F/PIC24H MCUs and dsPIC30F DSCs in similar packages (per Microchip) protects long-lived industrial designs against end-of-life by allowing socket-equivalent upgrades without PCB respins.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33FJ64MC710A-I/PF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33FJ128MC710A-I/PF | DSPIC33FJ256MC710A-I/PF | DSPIC33FJ64MC710-I/PF | DSPIC33FJ256MC510T-I/PF |
|---|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Flash Memory | 64 KB | 128 KB | 256 KB | 64 KB | 256 KB |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Temperature Range | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging | Tray | Tray | Tray | Tray | Tape & Reel (T suffix) |
주요 차별점
- AEC-Q100 automotive qualification at this price point (vs DSPIC33FJ64MC710-I/PF)
- Lowest-cost entry to 100-pin MC family (vs DSPIC33FJ256MC710A-I/PF)
- Motor-control peripherals vs general-purpose variant (vs DSPIC33FJ64GP710A-I/PF)
설계 노트
Provide a dedicated 3.0-3.6V rail with at least one 0.1uF ceramic capacitor at every VDD/VSS pair plus bulk 4.7-10uF near the chip; the dsPIC33F family datasheet requires all VDD/VSS pairs to be connected regardless of peripheral use. The core regulator options and oscillator circuits also need their own decoupling per the power section of the datasheet. Estimated: at 40 MIPS with heavy DSP loading, core current approaches the tens-of-mA class, so budget the 3.3V LDO accordingly.
The motor control PWM outputs switch with fast edges that couple into analog channels used by the 10-bit ADC for phase-current sensing. Route PWM traces away from ANx inputs and reference lines, use a solid ground plane, and place an RC anti-alias filter sized to the sampling scheme before each current-sense input. Simultaneous sampling accuracy depends on low source impedance; keep sense resistors and op-amp buffers physically close to the ADC input pins.
Do not assume the non-A dsPIC33FJ64MC710 errata apply verbatim to the A revision: the A silicon has a separate errata set, so check the Microchip errata document for your exact device before relying on boundary behaviors such as oscillator fail-safe or CAN wake-up. Also note the I suffix (-40C to +85C) rather than extended grades when designing for automotive cabins; and remember TQFP-100 leads are fine-pitch (0.5 mm class) - inspect reflow profiles to avoid bridging.
Plan the 100-pin TQFP (14x14 mm) footprint with via-fan-out beneath the chip to inner power/ground planes, keeping the CAN and PWM pairs as short differential/routed groups. If the internal fast RC oscillator is used for crystal-less operation, reserve board area for a crystal anyway so high-accuracy CAN timing can be added later; CAN 2.0B operation benefits from a crystal or external clock within the datasheet tolerance for bit-rate error.
규정 준수 정보
AEC-Q100 qualification confirmed via datasheets.com parametric listing (updated 05-AUG-2024). RoHS/lead-free status per standard Microchip production; REACH and halogen-free declarations should be obtained from Microchip's compliance portal.
