EFM32G840F128-QFN64 - 32MHz Cortex-M3 128KB MCU | Silicon Labs
부품 번호: EFM32G840F128-QFN64 ✓ 활성EFM32G840F128-QFN64 개요
A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one device. The EFM32G840F128-QFN64 belongs to the EFM32 Gecko family, where the hierarchy is ARM Cortex-M3 processor, 32-bit MCU, embedded microcontroller, and semiconductor. It executes firmware from its 128 KB Flash memory while using 16 KB of RAM for working data and stack operations.
Key features include operation up to 32 MHz, 56 digital I/O pins, and three 16-bit timer/counter peripherals. The 64-QFN package supports compact surface-mount layouts while its exposed pad provides a direct thermal path to the PCB. Low-energy operating techniques, fast wake-up behavior, and energy-saving modes are central to the Gecko architecture, making the MCU appropriate for systems that spend substantial time asleep.
The ARM Cortex-M3 core provides a 32-bit RISC instruction set and an integrated interrupt architecture for responsive control applications. Flash memory stores the application firmware, while RAM supports the main loop, interrupt service routines, communication buffers, and sensor-processing state. The three 16-bit timers support periodic events, timing, input capture, or output compare functions, depending on the configured peripheral mode and the complete device documentation.
Typical uses include industrial sensor nodes, low-energy wireless accessories, building-control endpoints, compact instrumentation, portable equipment, and embedded monitoring systems. Designers can select it where 128 KB of program storage, 16 KB of RAM, 56 GPIO, and a 32 MHz processing rate provide an appropriate balance between capability, board area, and energy-conscious operation.
The principal design considerations are power-rail integrity, decoupling, exposed-pad thermal management, and correct firmware support for the QFN footprint. Place the required bypass capacitors close to their supply pins, provide a low-impedance ground plane, and follow the manufacturer's footprint and land-pattern guidance. Confirm peripheral availability, interrupt behavior, and low-power mode requirements against the manufacturer documentation before finalizing the design.
This page combines the manufacturer's device specifications, package details, family alternatives, and practical implementation guidance to support component selection, PCB planning, firmware preparation, and sourcing decisions. The comparison tables and application sections emphasize where memory capacity, package compatibility, timer resources, and low-power operation matter in embedded product design.
드롭인 대체품: EFM32G840F128-QFN64 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EFM32G840F128-QFN64 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, Digital I/O Pins, Low-Power Features, Supply Voltage.
EFM32G840F64-QFN64
✅ 드롭인가격 문의
데이터시트 보기 →EFM32G840F32-QFN64
✅ 드롭인가격 문의
데이터시트 보기 →EFM32LG840F128-QFN64T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EFM32G840F128-QFN64 최대 정격 & 전기적 특성
| CPU Core | ARM Cortex-M3 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB |
| RAM | 16 KB |
| Digital I/O Pins | 56 pins |
| Timer Counters | 3 x 16-bit |
| 공급 전압 | 1.85 V to 3.8 V |
| 동작 온도 | -40 °C to 85 °C |
| 패키지 | 64-QFN, 9 x 9 mm |
| 실장 유형 | Surface mount |
| Product Series | EFM32 Gecko |
| Low-Power Features | Fast wake-up and energy-saving modes |
| Memory Protection Unit | Present |
| Wake-Up Interrupt Controller | Present |
| GPIO Configuration | Configurable push-pull and open-drain modes |
EFM32G840F128-QFN64 64-qfn, 9 x 9 mm 핀 구성 가이드
EFM32G840F128-QFN64(64-qfn, 9 x 9 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32G840F128-QFN64.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32G840F128-QFN64 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Building-Control Endpoint, Portable Monitoring Device, Low-Power Communications Controller, Compact Instrumentation Controller, Energy-Sensitive Embedded Control.
Industrial Sensor Node
The EFM32G840F128-QFN64 fits industrial sensor nodes that periodically measure a physical condition and transmit or locally process the result. Its 128 KB Flash provides room for application firmware, calibration tables, and protocol handlers, while 16 KB of RAM supports working buffers. The 32 MHz ARM Cortex-M3 core can execute signal conditioning and communications concurrently with three 16-bit timers available for periodic sampling. Low-energy operation, fast wake-up, and energy-saving modes are particularly valuable when the node spends most of its time asleep between measurements.
추천
Building-Control Endpoint
The EFM32G840F128-QFN64 is suitable for building-control endpoints that monitor occupancy, environmental conditions, or equipment state and drive local outputs. Its 56 digital I/O pins reduce the need for external I/O expanders in moderate peripheral-density designs. The three 16-bit timers can support periodic control tasks and timing functions, and the 32 MHz Cortex-M3 core has sufficient performance for local logic. Energy-saving modes help satisfy power constraints in distributed building systems where the endpoint remains connected to a low-voltage supply.
추천
Portable Monitoring Device
The EFM32G840F128-QFN64 fits portable monitoring equipment where a compact controller must balance code capacity, low energy use, and responsive event handling. Its 128 KB Flash accommodates firmware for sensor management, data logging, and user-interface support, while 16 KB of RAM accommodates short acquisition and processing buffers. Fast wake-up behavior is useful for button, timer, or sensor events, and energy-saving modes can extend operating time between charges. The 64-QFN 9 x 9 mm package also helps maintain a small board footprint.
추천
Low-Power Communications Controller
The EFM32G840F128-QFN64 can serve as the low-power controller in a communications accessory that coordinates radio or serial-interface activity. The 32 MHz ARM Cortex-M3 core provides timely protocol processing, and 128 KB of Flash leaves room for stack configuration and application logic. Three 16-bit timers are useful for frame timing, periodic wake events, and timeout management. Because the Gecko platform includes fast wake-up and energy-saving modes, the controller can limit active time while maintaining rapid response to incoming or scheduled events.
추천
Compact Instrumentation Controller
The EFM32G840F128-QFN64 is appropriate for compact instrumentation that combines acquisition control, timing, local processing, and communications. The 128 KB Flash capacity supports more elaborate firmware than the 64 KB and 32 KB G840 alternatives, while the 16 KB RAM provides working space for control logic and data movement. Three 16-bit timers can coordinate sampling and output events, and 56 digital I/O pins support switches, indicators, and digital interfaces. The 1.85 V to 3.8 V operating range supports integration into low-voltage embedded systems.
추천
Energy-Sensitive Embedded Control
The EFM32G840F128-QFN64 fits embedded-control products that must wake, execute a short control task, and return to a low-power state. Its 32 MHz Cortex-M3 core provides performance for control logic without requiring a higher-power processor, and the three 16-bit timers support event scheduling and precise peripheral timing. With 128 KB of Flash and 16 KB of RAM, firmware can include local intelligence, diagnostics, and communication routines. Fast wake-up behavior helps minimize response delay while energy-saving modes support longer operation from limited power budgets.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32G840F128-QFN64 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32G840F64-QFN64 | EFM32G840F32-QFN64 | EFM32LG840F128-QFN64T |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9 x 9 mm) | 64-QFN, same package format | 64-QFN, same package format | 64-QFN, same package format |
주요 차별점
- Four times the program memory of the G840F32 alternative (vs EFM32G840F32-QFN64)
- Twice the program memory of the G840F64 alternative (vs EFM32G840F64-QFN64)
- High GPIO density for embedded control (vs EFM32G840F64-QFN64)
- Low-power Gecko architecture for responsive duty-cycled systems (vs EFM32G840F32-QFN64)
설계 노트
Design the EFM32G840F128-QFN64 supply rail to remain between 1.85 V and 3.8 V under active-processing, sleep-transition, and I/O-load conditions. Place the required input and output bypass capacitors close to their corresponding pins, using short ground-return paths to limit supply transients. Verify that the regulator has adequate transient margin and that power sequencing satisfies every rail required by the Gecko low-power modes.
The 64-QFN package includes an exposed thermal pad, so the PCB copper must be connected to the pad according to the manufacturer's footprint guidance. Use an uninterrupted ground plane beneath the device and thermal-via pattern where required to distribute heat into the board. Validate the completed assembly at the highest expected ambient temperature and maximum processor activity rather than relying only on a no-load board test.
Use the manufacturer QFN land pattern rather than creating a footprint from the body dimensions alone. Account for pin-1 orientation, exposed-pad geometry, solder-mask definition, and paste coverage. Because a 64-QFN library drawing is not available in the package-diagram collection used by this page, use the Silicon Labs package drawing and pin-description table directly when generating or reviewing the PCB footprint.
Do not substitute the G840F32 or G840F64 solely because they use the same 64-QFN package. Their Flash capacities are 32 KB and 64 KB, compared with 128 KB for the target device. Check application size, bootloader requirements, retention settings, diagnostics, and future firmware growth. Also verify the complete pin and peripheral mapping before using any family member as a board-level replacement.
규정 준수 정보
The accessible device documentation identifies the EFM32G840F128-QFN64 as an industrial-temperature microcontroller but does not state the requested environmental and material compliance statuses. Obtain current declarations for the exact ordering code before release to production.