EFM32WG842F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs
부품 번호: EFM32WG842F64-QFP64 ✓ 활성EFM32WG842F64-QFP64 개요
A microcontroller is a semiconductor integrated circuit containing a processor core, program memory, data memory, peripherals, and I/O in one package. It belongs to the embedded-controller hierarchy: microcontroller → 32-bit MCU → ARM Cortex-M4F MCU → EFM32 Wonder Gecko. Compared with a general-purpose processor, the EFM32WG842F64-QFP64 combines deterministic peripheral control with energy-saving operating modes, making it suitable for connected control products that must operate from limited power budgets.
The principal device parameters are a 48 MHz clock, 64 KB of flash program memory, and a 1.98 V to 3.8 V supply range. The Cortex-M4F core includes the full DSP instruction set and floating-point unit, according to the manufacturer documentation, while product listings identify integrated AES and LCD-related capabilities. These features support signal processing, secure communication, and human-interface applications without requiring a separate high-performance processor.
Memory and peripheral density make this MCU useful in industrial equipment, building controls, sensor gateways, metering equipment, and compact consumer devices. The 64-TQFP package provides 64 accessible package leads and a 10 mm by 10 mm footprint suitable for surface-mount assembly. Its 32-bit architecture also provides more computational headroom than 8-bit or 16-bit controllers for protocol stacks, data filtering, and control-loop calculations.
Power-system design should account for the 1.98 V to 3.8 V operating range and the output requirements of every attached peripheral. Decoupling capacitors should be placed close to the supply pins, while unused inputs should be connected according to the pin-description table in the manufacturer datasheet. Firmware should use the documented clock, reset, and low-power configuration sequences to maintain reliable startup behavior.
This product page combines the manufacturer-level device identity with a package-focused engineering comparison, practical design guidance, and clearly identified substitution constraints. It is intended to help engineers determine whether the EFM32WG842F64-QFP64 matches an existing 64-TQFP PCB design before requesting commercial availability and lead-time confirmation.
드롭인 대체품: EFM32WG842F64-QFP64 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EFM32WG842F64-QFP64 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, LCD Support, Package, Product Type, Series.
EFM32WG842F64-B-QFP64
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EFM32G842F64-QFP64
✅ 드롭인가격 문의
데이터시트 보기 →EFM32G842F64-B-QFP64
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EFM32G842F64-QFP64T
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EFM32WG842F64-QFP64 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | EFM32 Wonder Gecko |
| Processor Core | ARM Cortex-M4F |
| CPU Frequency | 48 MHz |
| Architecture | 32-bit |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| RAM Size | 32K x 8 bits |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Nominal Supply Voltage | 3 V |
| DSP Capability | Full DSP instruction set |
| Floating-Point Unit | Integrated single-precision floating-point unit |
| Cryptographic Hardware | AES accelerator |
| LCD Support | LCD controller capability |
| 패키지 | 64-TQFP |
| Package Dimensions | 10 mm x 10 mm |
| 실장 유형 | Surface mount |
| 핀 수 | 64 pins |
| Backup-Battery Operation | Supported |
EFM32WG842F64-QFP64 10 mm x 10 mm 핀 구성 가이드
EFM32WG842F64-QFP64(10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32WG842F64-QFP64.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32WG842F64-QFP64 적합 용도: 6 애플리케이션s: Industrial Sensor Gateway, Building Control Module, Secure Wireless Control Node, Energy Metering, Human Interface Controller, Portable Medical Sensor.
Industrial Sensor Gateway
The EFM32WG842F64-QFP64 fits industrial sensor gateways that combine several low-speed sensors with a local communications link. Its 48 MHz ARM Cortex-M4F core provides enough throughput for data filtering, protocol handling, and control logic, while the 64 KB flash and 32 KB RAM support a compact embedded firmware image. The 1.98 V to 3.8 V operating range accommodates common low-voltage industrial rails. The Cortex-M4F floating-point unit is useful when converting and scaling sensor measurements. A typical design places the MCU beside the sensor interface, uses local decoupling at the supply pins, and keeps switching regulators and high-current actuators physically separated to reduce noise coupling.
추천
Building Control Module
The EFM32WG842F64-QFP64 is appropriate for building-control modules that supervise lighting, temperature, occupancy, and HVAC actuator signals. Its 48 MHz Cortex-M4F processor can execute deterministic control tasks, while 64 KB flash and 32 KB RAM are suitable for a compact protocol stack and application state. The 1.98 V to 3.8 V supply range supports low-voltage system rails, and the LCD-related functionality can assist local diagnostics or status indication. Design the board with separate analog and digital return paths, place input filtering near connector entry points, and verify timing against the manufacturer peripheral specifications.
추천
Secure Wireless Control Node
The EFM32WG842F64-QFP64 suits compact wireless control nodes that need secure protocol handling and low-power real-time control. Its 48 MHz ARM Cortex-M4F core supports packet processing and application logic, while the integrated AES accelerator can accelerate compatible cryptographic operations. The 64 KB flash and 32 KB RAM suit firmware that is deliberately constrained rather than a large multimedia workload. Because the MCU operates from 1.98 V to 3.8 V, the power tree should regulate the wireless module and sensors independently where their current demands differ. Follow the manufacturer reference configuration for clocking, reset, and peripheral initialization.
추천
Energy Metering
The EFM32WG842F64-QFP64 can serve as the control processor for a compact energy-metering design that measures, filters, and records electrical or flow data. The 48 MHz Cortex-M4F core includes DSP instructions and floating-point capability, which are valuable for calibration, filtering, and ratio calculations without a separate DSP controller. The 64 KB flash stores measurement code and parameters, while 32 KB RAM accommodates working buffers. Keep analog front-end components away from high-current switching paths and use a regulated, low-noise supply within the 1.98 V to 3.8 V device range. Validate accuracy against the manufacturer ADC and clock specifications before production calibration.
추천
Human Interface Controller
The EFM32WG842F64-QFP64 is well matched to compact human-interface controllers that combine a display, buttons, indicator LEDs, and a serial host interface. Product documentation identifies LCD-related functionality, while the 48 MHz Cortex-M4F core leaves processing headroom for graphics updates, input handling, and protocol management. The 64-TQFP package supports the necessary power, communications, control, and display connections in a compact 10 mm by 10 mm footprint. Place display interfaces away from noisy switching circuitry, observe timing limits from the manufacturer datasheet, and use the complete pin-description table when assigning multiplexed display signals.
추천
Portable Medical Sensor
The EFM32WG842F64-QFP64 can support portable biosensing and diagnostic accessories where low power, compactness, and deterministic signal processing are important. The 48 MHz Cortex-M4F core includes floating-point and DSP instructions for sensor filtering, while the AES accelerator can support security-sensitive communication tasks. Its 32 KB RAM is suitable for bounded sample buffers and 64 KB flash for application firmware. A portable design should operate the MCU within the 1.98 V to 3.8 V range and use separate, low-noise regulation for sensitive analog front ends. Medical claims, safety limits, and application-specific certification must be evaluated independently of the component specifications.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32WG842F64-QFP64 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32WG842F64-B-QFP64 | EFM32G842F64-QFP64 | EFM32G842F64-B-QFP64 | EFM32G842F64-QFP64T |
|---|---|---|---|---|---|
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Series | EFM32 Wonder Gecko | EFM32 Wonder Gecko | EFM32 Gecko | EFM32 Gecko | EFM32 Gecko |
주요 차별점
- Exact Wonder Gecko configuration with AES and LCD-related hardware (vs EFM32G842F64-QFP64)
- 48 MHz Cortex-M4F processing with integrated floating-point support (vs EFM32WG842F64-B-QFP64)
- 64-TQFP footprint supports direct PCB family consolidation (vs EFM32G842F64-B-QFP64)
설계 노트
Place all supply-decoupling capacitors directly beside the corresponding VDD and VSS pins, with short ground returns and no plane splits beneath the MCU's supply pins. Keep the 64-TQFP perimeter free of tall components when the footprint is assembled with automated optical inspection. Route oscillator, debug, and communications signals away from inductors and high-di/dt power paths. The target operates from 1.98 V to 3.8 V, so the regulator design must remain inside that range during startup and load transients.
The 1.98 V minimum operating voltage is the primary power-design constraint for this 48 MHz Cortex-M4F device. Confirm the regulator tolerance, startup ramp, and maximum transient deviation against the manufacturer electrical limits rather than assuming a nominal 3 V rail is sufficient. Use separate filtering paths for noisy loads and analog front ends, and verify brownout behavior in the final power-supply design. The 64 KB flash and 32 KB RAM do not determine power consumption; firmware duty cycle and active versus low-power states do.
Assign every unconnected input according to the complete manufacturer pin-description table before release to layout; do not infer unused-pin states from a generic 64-TQFP drawing. Keep the exposed perimeter of the QFP clear of solder mask dams that could interfere with lead formation or inspection. Match trace lengths to timing-sensitive external interfaces where the manufacturer specifies limits, and use a continuous ground reference beneath the device and its local decoupling network.
Do not approve a replacement based only on matching package size, flash capacity, and clock frequency. The Cortex-M4F peripherals, interrupt assignments, startup behavior, qualification, and device revision can affect firmware compatibility. For EFM32WG842F64-B-QFP64 and EFM32G842F64-family candidates, compare the manufacturer pin and peripheral tables, then review the clock configuration and firmware initialization. Record the approved ordering code in the schematic and production documentation to prevent accidental substitution.
규정 준수 정보
The target is a general-purpose industrial and consumer microcontroller, so AEC-Q100 qualification is not applicable unless the manufacturer identifies a specific automotive grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product or material declaration.