EP1C20F324C8 - Cyclone FPGA 20K LE, 233 IO | Altera
부품 번호: EP1C20F324C8 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $49.8 | $49.80 |
| 10 | $44.6 | $446.00 |
| 100 | $38.4 | $3,840.00 |
| 500 | $35.2 | $17,600.00 |
| 1,000 | $32 | $32,000.00 |
EP1C20F324C8 개요
An FPGA is an integrated circuit whose logic fabric can be reconfigured after manufacturing. Unlike a fixed-function ASIC or ASSP, an FPGA allows designers to implement custom digital logic by programming look-up tables, flip-flops, routing, and memory blocks. In the product taxonomy, an FPGA is at the apex of programmable logic: FPGA -> programmable logic device -> digital integrated circuit -> semiconductor. FPGAs are widely used when a design needs parallel I/O, rapid prototyping, field upgrades, or multiple interface protocols without committing to the non-recurring engineering cost of an ASIC.
The EP1C20F324C8 provides 20,060 logic elements organized into 2,006 logic array blocks (LABs), plus 294,912 RAM bits for on-chip buffering and small FIFOs. The 233 user I/Os in the 324-ball FBGA package support flexible board-level connection and parallel bus interfaces. As a mid-density Cyclone I device, the EP1C20F324C8 is designed for low-cost logic integration and is typically configured from an external serial configuration device such as an EPCS flash.
Cyclone I technology emphasizes predictable timing and low system cost rather than embedded DSP blocks or high-speed serial transceivers. The 130 nm process and 1.5 V core reduce dynamic power compared with earlier 2.5 V FPGAs, while the 275.03 MHz-class fabric supports common 8/16/32-bit bus state machines, memory controllers, and parallel processing tasks. Configuration is SRAM-based, so the bitstream must be reloaded at power-up from a configuration device, a host processor, or JTAG.
Typical applications include industrial motor control, factory automation I/O, video and image pre-processing, protocol bridging, and test-and-measurement instrumentation. The large user-I/O count is especially useful in systems that need to talk to multiple ADCs, DACs, SRAM, SDRAM, or parallel bus peripherals. The mature Cyclone I architecture is also widely documented for engineers seeking a well-understood FPGA design flow.
A key design consideration is that the EP1C20F324C8 requires a clean 1.5 V core rail and careful decoupling near every power ball. Designers should always verify pin assignments in the Quartus II Pin Planner using the official device pin-out files because BGA ball names and special-function pins cannot be memorized reliably from the package name alone.
This XAIPART page synthesizes distributor stock signals, speed-grade drop-in alternatives, and practical design guidance not repeated in the raw datasheet table. It helps engineers compare EP1C20F324C8 against faster Altera Cyclone variants and identify the safest pin-to-pin replacement without re-laying out the PCB.
드롭인 대체품: EP1C20F324C8 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1C20F324C8 (동일 폼 팩터 및 풋프린트) — 차이점: Speed Grade, Process Technology, Package, Total RAM Bits, Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1C20F324C8N
✅ 드롭인✓ 재고 있음
$42.36 / 개
데이터시트 보기 →EP1C20F324C7N
✅ 드롭인✓ 재고 있음
$56.04 / 개
데이터시트 보기 →EP1C20F324C7
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$17.95 / 개
데이터시트 보기 →EP1C20F324C6N
✅ 드롭인✓ 재고 있음
$21.75 / 개
데이터시트 보기 →EP1C20F324C6
✅ 드롭인✓ 재고 있음
$105 / 개
데이터시트 보기 →EP1C20F324C8 최대 정격 & 전기적 특성
| Part Number | EP1C20F324C8 |
| Product Family | Cyclone I |
| Number of Logic Elements | 20,060 |
| Number of LABs / CLBs | 2,006 |
| Total RAM Bits | 294,912 |
| Number of User I/Os | 233 |
| 패키지 / 케이스 | 324-FBGA |
| Total Pins / Balls | 324 |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm |
| 최대 클록 주파수 | 275.03 MHz |
| Speed Grade | 8 |
| Temperature Grade | C (commercial) |
| 동작 온도 범위 | 0°C to 85°C (per C suffix) |
| 실장 유형 | Surface Mount |
| Transceivers | None (hard transceivers not present on Cyclone I) |
| Configuration Memory | External EPCS serial configuration device recommended |
| AEC-Q100 | Not applicable (FPGA not AEC-Q100 listed) |
EP1C20F324C8 324-fbga 핀 구성 가이드
EP1C20F324C8(324-fbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1C20F324C8.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1C20F324C8 적합 용도: 6 애플리케이션s: Industrial Motor Control, Factory Automation I/O and PLC Expansion, Video and Image Pre-Processing, Protocol Bridging and Parallel Bus Conversion, Custom DSP and Signal Conditioning Front End, Legacy FPGA Migration and Pin-Compatible Density Upgrade.
Industrial Motor Control
The EP1C20F324C8 fits multi-axis motor control applications where an FPGA implements PWM generation, dead-time insertion, quadrature encoder decoding, and fault management in parallel. Its 20,060 logic elements are enough for several servo or stepper axis cores, while 233 user I/Os connect to gate drivers, current-sense ADCs, and encoder interfaces without external CPLD glue. The 1.5 V core reduces switching power compared with older programmable logic, and the 275.03 MHz-class fabric supports fast current-loop update rates in the tens of kilohertz range. Place an EPCS configuration device on the SPI header so the motor-control bitstream loads immediately at power-up. The main trade-off is that Cyclone I lacks a hardened processor or high-speed transceiver, so communication stacks usually run on an external MCU.
추천
Factory Automation I/O and PLC Expansion
EP1C20F324C8 is well suited to PLC I/O expansion modules and factory-automation backplanes because its 233 user I/Os can implement parallel bus interfaces, field-bus protocol logic, and many discrete input/output channels in one device. The 20,060 logic elements allow creation of soft peripherals such as UARTs, SPI masters, timer blocks, and interrupt controllers with substantial margin. Having 294,912 RAM bits supports small frame buffers and lookup tables. Designers often configure the FPGA from a host processor or an EPCS flash to allow field updates. The commercial 0°C to 85°C temperature grade limits use to indoor/controlled factory environments; industrial-grade Altera variants should be chosen for wider-temperature cabinets.
추천
Video and Image Pre-Processing
In image-capture and pre-processing pipelines, the EP1C20F324C8 provides an inexpensive logic platform for line buffering, pixel formatting, color-space conversion, and simple thresholding. The 294,912 RAM bits create line buffers or small ROI memories, while 233 user I/Os connect to CMOS image sensors, parallel ADCs, LCD controllers, or SRAM. The 275.03 MHz fabric speed is appropriate for moderate-resolution video rates when the pipeline uses wide parallel buses. Since Cyclone I does not include hardened multipliers or DSP blocks, designers should implement only lightweight arithmetic or use external DSP-assisted processing. The FPGA can also serve as the timing generator for the image sensor, reducing external glue logic.
추천
Protocol Bridging and Parallel Bus Conversion
EP1C20F324C8 is commonly chosen for protocol bridging because the FPGA can translate between SPI, I2C, UART, parallel SRAM-like buses, and custom processor interfaces without additional glue logic. The 233 I/Os give the board designer flexibility to connect one or more MCUs, DSPs, ADCs, DACs, and SRAM banks. The 20,060 logic elements accommodate soft FIFOs, state machines, and latency-matching logic, while the 294,912 RAM bits buffer packets or samples. The 1.5 V core simplifies the digital supply design if the board already uses other modern 1.5 V-logic FPGAs. One practical note is that all I/O standards and bank voltages must be checked in the Cyclone family datasheet and pin planner, because the specific I/O standards were not enumerated in the source snippet.
추천
Custom DSP and Signal Conditioning Front End
For moderate throughput custom digital signal processing, the EP1C20F324C8 can implement preamble detection, decimation filters, demodulation logic, and data formatting in programmable logic. Although Cyclone I does not include hardened hardware multipliers, the 20,060 logic elements allow small multiplier structures built from logic fabric for low-rate DSP. The 294,912 RAM bits support coefficient tables, channel buffers, and ping-pong FIFOs. The 233 user I/Os connect multiple ADC and DAC parallel ports, making the FPGA useful as a signal-conditioning front end for test instruments and software-defined radio baseband prototypes. The 275.03 MHz fabric is adequate for sample rates in the low-MHz range when using wide data words. External configuration memory is essential for autonomous operation after power cycling.
추천
Legacy FPGA Migration and Pin-Compatible Density Upgrade
The EP1C20F324C8 is valuable for designs already using logic from the Altera Cyclone family because the 324-FBGA footprint supports speed-grade second sources. With 20,060 logic elements, the device also provides a larger logic target than the lower-density Cyclone parts in the same package family, allowing a design to absorb extra logic without changing the PCB. Since C7N, C6N, and other speed-grade variants are pin-compatible, an engineer can qualify the slower C8 device for cost-sensitive production and later insert a faster variant for performance upgrades. The main caveat is that 324 individual BGA ball assignments must be verified from official Quartus pin files; only the user I/O count and package are confirmed by the distributor snippets.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1C20F324C8 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1C20F324C8N | EP1C20F324C7N | EP1C20F324C7 | EP1C20F324C6N | EP1C20F324C6 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 324-FBGA | 324-FBGA | 324-FBGA | 324-FBGA | 324-FBGA | 324-FBGA |
| Number of Pins/Balls | 324 | 324 | 324 | 324 | 324 | 324 |
| Logic Elements | 20,060 | 20,060 | 20,060 | 20,060 | 20,060 | 20,060 |
| Total RAM Bits | 294,912 | 294,912 | 294,912 | 294,912 | 294,912 | 294,912 |
| Number of User I/Os | 233 | 233 | 233 | 233 | 233 | 233 |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Process Technology | 130 nm | 130 nm | 130 nm | 130 nm | 130 nm | 130 nm |
| Speed Grade | 8 | 8 | 7 | 7 | 6 | 6 |
| RoHS / Lead-Free Finish | Unknown for non-N C8 | Lead-free N-suffix variant | Lead-free N-suffix variant | Non-N legacy finish | Lead-free N-suffix variant | Non-N legacy finish |
주요 차별점
- Cost-effective baseline speed grade with identical device resources (vs EP1C20F324C6N)
- Density and package compatibility across speed-grade family (vs EP1C20F324C7N)
- Non-N legacy-finish sourcing option for older assembly lines (vs EP1C20F324C8N)
설계 노트
Estimated: power dissipation is dominated by the 1.5 V core current and I/O bank currents. For an initial estimate, use P = 1.5 V * ICC_INT plus the product of each I/O rail voltage and its dynamic/static current. Because the verified data does not include a specific ICC_INT number, calculate from the Cyclone FPGA family datasheet power tables rather than guessing. Provide separate 1.5 V core and I/O bank supplies and place a 100 nF ceramic capacitor near every power ball cluster to maintain low impedance across the switching band.
The 324-ball FBGA package requires careful BGA fanout. Work from the official Cyclone .pin and Quartus Pin Planner files because many of the 324 balls are dedicated to configuration, clock, JTAG, and power. If migrating across speed-grade variants in the same F324 package, the PCB footprint and routing remain identical; only timing constraints and date-code qualification change. Do not assume all balls that are unused in one density are NC on every Cyclone I package variant; verify with the device pin file before routing.
Cyclone I FPGAs are SRAM-based and have no non-volatile configuration storage. A common pitfall is forgetting to add an EPCS serial configuration device or host-controlled configuration path, causing the FPGA to appear unconfigured after every power cycle. Also, review the JTAG and configuration pin assignments during layout: pull-up or pull-down requirements vary by configuration scheme. Because the C8 non-N part may not be RoHS marked in the verified data, use the N-suffix variant for lead-free assembly unless the purchase specification explicitly permits legacy finish.
규정 준수 정보
No explicit compliance status for the non-N EP1C20F324C8 appears in the Verified Web Data. The N-suffix variants such as EP1C20F324C8N are commonly lead-free/RoHS-marked counterparts; confirm the actual finish and compliance certificate from the official Intel/Altera literature before assembly.