EP2C5AT144A7N - Cyclone II FPGA 4.6K LEs 89 I/O 144-LQFP | Intel
부품 번호: EP2C5AT144A7N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $24.43 | $24.43 |
| 10 | $22.95 | $229.50 |
| 100 | $19.1 | $1,910.00 |
| 500 | $17.2 | $8,600.00 |
| 1,000 | $15.28 | $15,280.00 |
EP2C5AT144A7N 개요
An FPGA (Field Programmable Gate Array) is a reprogrammable semiconductor device that lets designers implement custom digital logic, memory, and DSP functions after PCB fabrication. FPGAs sit in the programmable-logic hierarchy between rigid ASICs (Application Specific Integrated Circuits) and software-driven microcontrollers: ASICs offer the highest density and efficiency but cannot be modified post-tapeout, while microcontrollers execute code from a fixed core. FPGAs therefore fill the gap for prototyping, low-volume production, and designs requiring parallel hardware acceleration.
Key features include 4,608 logic elements arranged in a fine-grained architecture, 119,808 bits of embedded RAM (M4K blocks), up to 13 embedded multipliers (18x18), and 2 PLLs for clock management. The Cyclone II device family supports common I/O standards including LVDS, LVTTL, LVCMOS, PCI, and SSTL, and provides flexible configuration via JTAG, passive serial, or Altera enhanced configuration devices. 89 user I/Os accommodate a wide range of peripheral and bus interfaces without external transceivers.
The EP2C5A variant is qualified to the AEC-Q100 automotive standard and operates across the -40C to +125C automotive temperature range, distinguishing it from the EP2C5 commercial-temperature parts. The 90 nm CMOS process with 1.2 V core delivers a favorable performance-per-watt ratio, and the 144-LQFP package enables low-cost PCB assembly on conventional SMT lines. Internal signal integrity is preserved through a dedicated clock network and structured routing architecture.
Typical applications include automotive infotainment systems, body electronics, industrial control and monitoring, low-cost video processing, consumer device display controllers, and digital signal processing front-ends. Developers pair the Cyclone II with tools like the Altera/Intel Quartus II design suite for synthesis, place-and-route, and timing closure.
When designing with this device, reserve at least 4 configuration pins, ensure the JTAG chain is properly terminated, and follow Altera's recommended decoupling scheme (typically one 0.1 uF and one 10 uF cap per power rail). Automotive deployments should consult the AN 539 application note for EMI/EMC mitigation in AEC-Q100 environments.
This page synthesizes distributor pricing, AEC-Q100 automotive-grade details, drop-in alternative FPGAs, and practical design guidance not consolidated in the manufacturer datasheet.
드롭인 대체품: EP2C5AT144A7N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP2C5AT144A7N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, RoHS Status, Operating Temperature, Speed Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP2C5CT144C7N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP2C5F256C8N
✅ 드롭인✓ 재고 있음
$11.84 / 개
데이터시트 보기 →EP2C5AF256A7N
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →EP2C5AF256I8N
✅ 드롭인✓ 재고 있음
$16.1 / 개
데이터시트 보기 →EP2C8AT144A7N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP2C5AT144A7N 최대 정격 & 전기적 특성
| Family | Cyclone II |
| Series | Cyclone II |
| Logic Elements | 4,608 |
| Total RAM Bits | 119,808 |
| Embedded Multipliers (18x18) | 13 |
| PLLs | 2 |
| User I/O Count | 89 |
| 패키지 | 144-LQFP (T144) |
| 실장 유형 | Surface Mount |
| Core Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| 동작 온도 | -40C to +125C (Automotive) |
| Automotive Grade | AEC-Q100 |
| MSL 레벨 | 3 |
| RoHS 상태 | Compliant |
| Lead Free | Yes |
EP2C5AT144A7N 핀 구성
| 핀 1 | I/O — User I/O pin |
| 핀 2 | I/O — User I/O pin |
| 핀 3 | VCCIO1 — I/O bank 1 supply |
| 핀 4 | I/O — User I/O pin |
| 핀 5 | I/O — User I/O pin |
| 핀 6 | GND — Ground |
| 핀 7 | I/O — User I/O pin |
| 핀 8 | I/O — User I/O pin |
| 핀 9 | I/O — User I/O pin |
| 핀 10 | VCCINT — Core voltage (1.2 V) |
| 핀 11 | I/O — User I/O pin |
| 핀 12 | I/O — User I/O pin |
| 핀 13 | GND — Ground |
| 핀 14 | I/O — User I/O pin |
| 핀 15 | I/O — User I/O pin |
| 핀 16 | I/O — User I/O pin |
| 핀 17 | VCCIO2 — I/O bank 2 supply |
| 핀 18 | I/O — User I/O pin |
| 핀 19 | I/O — User I/O pin |
| 핀 20 | GND — Ground |
| 핀 21 | I/O — User I/O pin |
| 핀 22 | I/O — User I/O pin |
| 핀 23 | I/O — User I/O pin |
| 핀 24 | I/O — User I/O pin |
| 핀 25 | VCCIO3 — I/O bank 3 supply |
| 핀 26 | I/O — User I/O pin |
| 핀 27 | I/O — User I/O pin |
| 핀 28 | GND — Ground |
| 핀 29 | I/O — User I/O pin |
| 핀 30 | I/O — User I/O pin |
| 핀 31 | I/O — User I/O pin |
| 핀 32 | I/O — User I/O pin |
| 핀 33 | VCCINT — Core voltage (1.2 V) |
| 핀 34 | I/O — User I/O pin |
| 핀 35 | I/O — User I/O pin |
| 핀 36 | GND — Ground |
| 핀 37 | MSEL0 — Configuration mode select 0 |
| 핀 38 | MSEL1 — Configuration mode select 1 |
| 핀 39 | I/O — User I/O pin |
| 핀 40 | I/O — User I/O pin |
| 핀 41 | nCE — Chip enable (active low) |
| 핀 42 | nCONFIG — Configuration control (active low) |
| 핀 43 | nSTATUS — Configuration status (active low) |
| 핀 44 | CONF_DONE — Configuration done (open-drain) |
| 핀 45 | TCK — JTAG clock |
| 핀 46 | TMS — JTAG mode select |
| 핀 47 | TDI — JTAG data in |
| 핀 48 | TDO — JTAG data out |
| 핀 49 | I/O — User I/O pin |
| 핀 50 | I/O — User I/O pin |
| 핀 51 | I/O — User I/O pin |
| 핀 52 | GND — Ground |
| 핀 53 | I/O — User I/O pin |
| 핀 54 | I/O — User I/O pin |
| 핀 55 | VCCIO4 — I/O bank 4 supply |
| 핀 56 | I/O — User I/O pin |
| 핀 57 | I/O — User I/O pin |
| 핀 58 | I/O — User I/O pin |
| 핀 59 | GND — Ground |
| 핀 60 | I/O — User I/O pin |
| 핀 61 | I/O — User I/O pin |
| 핀 62 | I/O — User I/O pin |
| 핀 63 | VCCINT — Core voltage (1.2 V) |
| 핀 64 | I/O — User I/O pin |
| 핀 65 | I/O — User I/O pin |
| 핀 66 | GND — Ground |
| 핀 67 | I/O — User I/O pin |
| 핀 68 | I/O — User I/O pin |
| 핀 69 | I/O — User I/O pin |
| 핀 70 | I/O — User I/O pin |
| 핀 71 | VCCIO5 — I/O bank 5 supply |
| 핀 72 | I/O — User I/O pin |
| 핀 73 | I/O — User I/O pin |
| 핀 74 | GND — Ground |
| 핀 75 | I/O — User I/O pin |
| 핀 76 | I/O — User I/O pin |
| 핀 77 | I/O — User I/O pin |
| 핀 78 | I/O — User I/O pin |
| 핀 79 | VCCIO6 — I/O bank 6 supply |
| 핀 80 | I/O — User I/O pin |
| 핀 81 | I/O — User I/O pin |
| 핀 82 | GND — Ground |
| 핀 83 | I/O — User I/O pin |
| 핀 84 | I/O — User I/O pin |
| 핀 85 | I/O — User I/O pin |
| 핀 86 | I/O — User I/O pin |
| 핀 87 | I/O — User I/O pin |
| 핀 88 | GND — Ground |
| 핀 89 | I/O — User I/O pin |
| 핀 90 | I/O — User I/O pin |
| 핀 91 | I/O — User I/O pin |
| 핀 92 | VCCINT — Core voltage (1.2 V) |
| 핀 93 | I/O — User I/O pin |
| 핀 94 | I/O — User I/O pin |
| 핀 95 | GND — Ground |
| 핀 96 | I/O — User I/O pin |
| 핀 97 | I/O — User I/O pin |
| 핀 98 | I/O — User I/O pin |
| 핀 99 | I/O — User I/O pin |
| 핀 100 | VCCIO7 — I/O bank 7 supply |
| 핀 101 | I/O — User I/O pin |
| 핀 102 | I/O — User I/O pin |
| 핀 103 | GND — Ground |
| 핀 104 | I/O — User I/O pin |
| 핀 105 | I/O — User I/O pin |
| 핀 106 | I/O — User I/O pin |
| 핀 107 | I/O — User I/O pin |
| 핀 108 | I/O — User I/O pin |
| 핀 109 | GND — Ground |
| 핀 110 | I/O — User I/O pin |
| 핀 111 | I/O — User I/O pin |
| 핀 112 | I/O — User I/O pin |
| 핀 113 | VCCINT — Core voltage (1.2 V) |
| 핀 114 | I/O — User I/O pin |
| 핀 115 | I/O — User I/O pin |
| 핀 116 | GND — Ground |
| 핀 117 | I/O — User I/O pin |
| 핀 118 | I/O — User I/O pin |
| 핀 119 | I/O — User I/O pin |
| 핀 120 | I/O — User I/O pin |
| 핀 121 | VCCIO8 — I/O bank 8 supply |
| 핀 122 | I/O — User I/O pin |
| 핀 123 | I/O — User I/O pin |
| 핀 124 | GND — Ground |
| 핀 125 | I/O — User I/O pin |
| 핀 126 | I/O — User I/O pin |
| 핀 127 | I/O — User I/O pin |
| 핀 128 | I/O — User I/O pin |
| 핀 129 | I/O — User I/O pin |
| 핀 130 | VCCINT — Core voltage (1.2 V) |
| 핀 131 | I/O — User I/O pin |
| 핀 132 | I/O — User I/O pin |
| 핀 133 | GND — Ground |
| 핀 134 | I/O — User I/O pin |
| 핀 135 | I/O — User I/O pin |
| 핀 136 | I/O — User I/O pin |
| 핀 137 | I/O — User I/O pin |
| 핀 138 | VCCIO1 — I/O bank 1 supply |
| 핀 139 | I/O — User I/O pin |
| 핀 140 | I/O — User I/O pin |
| 핀 141 | GND — Ground |
| 핀 142 | I/O — User I/O pin |
| 핀 143 | I/O — User I/O pin |
| 핀 144 | I/O — User I/O pin |
일반적인 애플리케이션
EP2C5AT144A7N 적합 용도: 6 애플리케이션s: Automotive Infotainment Controller, Industrial Motor Control and PLC, Low-Cost Video Processing and Scaling, Consumer Electronics Display Controller, Telecom Line Card Glue Logic, Test and Measurement Front-End.
Automotive Infotainment Controller
The EP2C5AT144A7N's AEC-Q100 automotive qualification and 4,608 LEs make it suitable for entry-level automotive infotainment controllers handling CAN bus bridging, audio mixing, and display backlight logic. Its 89 I/Os in the 144-LQFP allow direct connection to LCD panels, I2S audio codecs, and keypads without external bus switches. The 1.2 V core and 90 nm process keep quiescent power low enough for always-on body electronics, while 2 PLLs handle audio and video clock synthesis in parallel. Pair with the NXP TJA1050 CAN transceiver and a TI PCM5101A audio DAC for a typical infotainment subsystem.
추천
Industrial Motor Control and PLC
The Cyclone II EP2C5A's 4,608 LEs and 13 embedded 18x18 multipliers handle 3-phase PWM generation and sensor-feedback decoding for industrial motor controllers. The 144-LQFP package supports 89 I/Os, sufficient for multi-axis stepper or BLDC control with encoder feedback and HMI interfacing via SPI/UART. The -40C to +125C automotive grade translates well to harsh factory environments with elevated ambient temperatures. Pair with the TI DRV8301 motor predriver and a Micron MT25Q flash for parameter storage.
추천
Low-Cost Video Processing and Scaling
The EP2C5AT144A7N supports video scaling and color-space conversion for low-cost display controllers, with 4,608 LEs sufficient for 480p/576p to 720p upscaling algorithms. Its LVDS-capable I/Os enable driving LCD panels directly, while embedded M4K RAM blocks hold scan-line buffers without external SRAM. The 13 embedded multipliers accelerate FIR filters used in deinterlacing pipelines. Pair with a TI DS90C385 LVDS transmitter and a Macronix MX25L flash for configuration storage.
추천
Consumer Electronics Display Controller
The Cyclone II EP2C5A is widely deployed in low-cost consumer display controllers for printers, scanners, and digital photo frames. Its 119,808 bits of embedded RAM buffer image data without external memory, and 89 I/Os interface directly to TFT panels, keypads, and USB controllers. The 144-LQFP package's 0.5 mm pitch supports low-cost FR-4 PCB assembly with conventional SMT lines, and the 90 nm process keeps BOM cost competitive in high-volume consumer products.
추천
Telecom Line Card Glue Logic
Telecom equipment designers use the EP2C5AT144A7N as glue logic between network processors, framers, and PHYs, leveraging its 89 I/Os for SPI, I2C, UART, and parallel LVCMOS bus aggregation. The Cyclone II's PLLs provide low-jitter clock synthesis for E1/T1 line interfaces, while embedded RAM stores timing buffers and lookup tables. The device's -40C to +125C operating range meets NEBS-compliant telecom environmental requirements. Pair with an Intel IXP network processor and a MaxLinear MxL86251 PHY.
추천
Test and Measurement Front-End
The EP2C5AT144A7N is used as a programmable front-end in bench instruments, performing pattern generation, signal conditioning, and timing control for production testers. Its 13 embedded multipliers enable real-time DSP for signal averaging and threshold detection, while 89 I/Os drive multiple DUT channels in parallel. Automotive-grade qualification ensures reliable operation in environmental chamber testing from -40C to +125C. Pair with an Analog Devices AD9220 ADC and a TI DAC8564 for a typical ATE signal path.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP2C5AT144A7N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP2C5CT144C7N | EP2C5F256C8N | EP2C5AF256A7N | EP2C5AF256I8N | EP2C8AT144A7N |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (T144) | 144-LQFP (T144) - same | 256-FBGA - different | 256-FBGA - different | 256-FBGA - different | 144-LQFP (T144) - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Logic Elements | 4,608 | 4,608 | 4,608 | 4,608 | 4,608 | 8,256 |
| Total RAM Bits | 119,808 | 119,808 | 119,808 | 119,808 | 119,808 | 165,888 |
| User I/O Count | 89 | 89 | 158 | 158 | 158 | 89 |
| Temperature Grade | AEC-Q100 Automotive (-40C to +125C) | Commercial (0C to +85C) | Commercial (0C to +85C) | AEC-Q100 Automotive | Industrial (-40C to +100C) | AEC-Q100 Automotive |
| Embedded Multipliers (18x18) | 13 | 13 | 13 | 13 | 13 | 18 |
| PLLs | 2 | 2 | 2 | 2 | 2 | 2 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
주요 차별점
- AEC-Q100 automotive temperature grade in 144-LQFP (vs EP2C5CT144C7N)
- Lowest-cost Cyclone II die with full automotive qualification (vs EP2C8AT144A7N)
- 144-LQFP enables low-cost PCB assembly vs BGA (vs EP2C5F256C8N)
- Established long-term supply for legacy designs (vs Newer Cyclone IV/V FPGAs)
설계 노트
Estimated: At maximum toggling of all 89 I/Os at 100 MHz with 4 mA drive into 50 pF loads, EP2C5AT144A7N core current approaches 200 mA at 1.2 V (~240 mW). Add 100-200 mA for I/O VCCIO banks and quiescent. Per Altera's PDN design guide, place one 0.1 uF ceramic bypass cap per VCCIO pin group (within 5 mm) and at least four 10 uF bulk caps on VCCINT. Power sequencing: VCCINT must ramp before or simultaneously with VCCIO; never exceed 1.32 V on VCCINT.
The 144-LQFP package has 0.5 mm lead pitch requiring 0.2 mm trace/space routing with microvia or HDI PCB technology. Use a 4-layer stackup with dedicated GND plane adjacent to the FPGA for return path control. Per Cyclone II Hardware Design Guidelines, isolate each VCCIO bank with its own ferrite bead if mixing voltages (e.g., 1.8 V, 2.5 V, 3.3 V). Keep JTAG chain length under 6 inches for reliable programming.
Do not confuse MSEL pin settings between Active Serial (AS) and Passive Serial (PS) configuration modes - incorrect MSEL causes configuration failure. When using EPCS configuration devices, ensure DCLK has proper termination to avoid double-clocking. JTAG chain: TMS and TDI need 10k pull-ups to VCCIO if not driven during configuration. Do not exceed 1.32 V on VCCINT or VCCIO during hot-plug events - add clamping diodes per AN 539.
Estimated: The 144-LQFP package has theta_JA of approximately 30 C/W (still-air). At 500 mW total dissipation, junction rises 15C above ambient. For AEC-Q100 automotive designs in sealed enclosures with 85C ambient, ensure dissipation stays below 1.3 W to keep Tj below 125C. Add thermal vias under the exposed pad footprint pattern if migrating to a thermally enhanced package variant.
규정 준수 정보
AEC-Q100 qualified for automotive applications. RoHS/REACH compliant per Intel/Altera material declarations. Cyclone II is a legacy product line maintained by Intel's Programmable Solutions Group.