EP4CGX22CF19C8 - Cyclone IV GX FPGA, 21K LEs, 324-FBGA | Intel
부품 번호: EP4CGX22CF19C8 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $42.5 | $42.50 |
| 10 | $39.1 | $391.00 |
| 100 | $34.85 | $3,485.00 |
| 500 | $30.2 | $15,100.00 |
| 1,000 | $26.75 | $26,750.00 |
EP4CGX22CF19C8 개요
A Cyclone IV GX FPGA is a reprogrammable logic device belonging to the programmable-logic family, sitting hierarchically below ASICs and above fixed-function ASSPs in the design flexibility spectrum. The GX sub-series adds dedicated multi-gigabit transceivers that differentiate it from the standard Cyclone IV E family, allowing direct interfacing with PCIe Gen1, Gigabit Ethernet, Serial RapidIO, CPRI, and other high-speed serial protocols without external PHY devices. This combination of programmable fabric, embedded memory blocks, DSP blocks, and integrated transceivers in a single low-power chip makes Cyclone IV GX a common choice for bridging, protocol conversion, and I/O expansion designs.
Key features include 21,280 logic elements (LEs), 774 Kbits of embedded RAM (M9K blocks), 80 embedded 18x18 multipliers for DSP operations, two PLL blocks per quadrant for clock management, and a maximum of 150 general-purpose user I/O pins. The device also integrates PCI Express hard IP blocks and up to eight full-duplex transceiver channels supporting data rates from 600 Mbps up to 3.125 Gbps. Configuration is supported via JTAG, active serial (AS), passive serial (PS), and fast passive parallel (FPP) modes through dedicated configuration pins.
The 324-ball FBGA package uses a 1.0 mm ball pitch, providing a compact footprint for space-constrained boards while supporting up to 150 user I/Os. The -C8 speed grade denotes a commercial temperature range with the 8-corner speed bin, balanced for medium-speed designs. Quartus II design software (or the maintained Intel Quartus Prime Lite edition) is used for synthesis, place-and-route, and bitstream generation.
Typical applications include PCI Express endpoint cards, industrial video bridges, low-cost serial protocol converters, motor control pre-processing, and base-station fronthaul interfaces where the integrated transceivers eliminate the need for a separate PHY chip.
Designers should pay attention to transceiver reference-clock routing and power-rail sequencing for the analog supply (VCCA), because jitter on the reference clock directly limits transceiver eye-diagram performance at 3.125 Gbps.
This page synthesizes distributor stock, drop-in alternatives from the same Cyclone IV GX family, and practical design notes that are not duplicated on the manufacturer product page.
드롭인 대체품: EP4CGX22CF19C8 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP4CGX22CF19C8 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Transceivers, Operating Temperature, PLLs, Process Technology.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP4CGX22CF19C8N
✅ 드롭인✓ 재고 있음
$32.45 / 개
데이터시트 보기 →EP4CGX22CF19C7N
✅ 드롭인✓ 재고 있음
$53.1 / 개
데이터시트 보기 →EP4CGX22IF19C8N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EP4CGX22CF19C6N
✅ 드롭인✓ 재고 있음
$31.95 / 개
데이터시트 보기 →EP4CGX22CF19C8 최대 정격 & 전기적 특성
| Family | Cyclone IV GX |
| Logic Elements | 21,280 |
| Embedded Memory (bits) | 774,144 |
| Number of M9K Memory Blocks | 66 |
| Embedded 18x18 Multipliers | 80 |
| General-Purpose PLLs | 2 |
| Maximum User I/O Pins | 150 |
| Transceiver Channels | Up to 4 full-duplex (varies by package) |
| Maximum Transceiver Data Rate | 3.125 Gbps |
| Process Technology | 60 nm low-power |
| Core Supply Voltage | 1.2 V |
| 패키지 | 324-ball FBGA, 1.0 mm pitch |
| Speed Grade | C8 (commercial) |
| Operating Temperature (junction) | 0°C to 85°C (commercial) |
| Configuration Modes | JTAG, AS, PS, FPP |
| RoHS 상태 | Compliant |
EP4CGX22CF19C8 324-ball fbga, 1.0 mm pitch 핀 구성 가이드
EP4CGX22CF19C8(324-ball fbga, 1.0 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP4CGX22CF19C8.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP4CGX22CF19C8 적합 용도: 6 애플리케이션s: PCI Express Endpoint Cards, Gigabit Ethernet Bridging, Industrial Video Format Conversion, Motor Control Pre-Processing (FOC), Serial Protocol Converters / CPRI Fronthaul, Low-Cost ASIC Prototyping / I/O Expansion.
PCI Express Endpoint Cards
The EP4CGX22CF19C8's integrated PCI Express hard IP block supports x1 Gen1 endpoint operation at 2.5 Gbps per lane, eliminating the need for an external PHY. With 21,280 logic elements, 774 Kbits of embedded RAM, and 80 DSP multipliers, the device comfortably fits protocol state machines, scatter-gather DMA engines, and application logic for low-cost PCIe add-in cards used in industrial PCs, test instruments, and data-acquisition boards. Designers typically pair it with a small external clock buffer for the 100 MHz PCIe reference and place the FBGA close to the board edge connector to minimize lane length.
추천
Gigabit Ethernet Bridging
The EP4CGX22CF19C8 supports 1000BASE-X Gigabit Ethernet over its 3.125 Gbps transceivers using SGMII or 1000BASE-X PCS implementations in fabric logic. With 150 user I/Os the FPGA can expose multiple GMII/RGMII/SGMII interfaces plus management-plane I2C and MDIO, acting as a multi-port Ethernet bridge in industrial gateways and small-cell backhaul. Designers typically instantiate a soft Tri-Mode Ethernet MAC core from Intel and pair the device with an external 125 MHz reference clock for the PHY-side interface.
추천
Industrial Video Format Conversion
The EP4CGX22CF19C8's 80 DSP multipliers handle real-time chroma resampling, scaling, and color-space conversion between Camera Link, DVI/HDMI, and SDI video formats. Embedded M9K memory buffers line-store data for horizontal scaling, while the abundant user I/Os interface to external video ADCs/DACs and LVDS serializers. The commercial temperature grade suits indoor industrial cameras and video walls; for outdoor broadcast equipment, designers move to the industrial-grade 'I' variant of the same die.
추천
Motor Control Pre-Processing (FOC)
Field-oriented control of three-phase motors requires Park/Clarke transforms, PI controllers, and space-vector PWM generation, all of which fit within 21,280 logic elements. The EP4CGX22CF19C8's 80 18x18 multipliers accelerate Park/Clarke math and current-loop PI computation at switching frequencies up to 100 kHz. The 774 Kbits of embedded RAM store sinusoidal lookup tables and per-axis calibration constants. Designers pair the FPGA with external gate drivers and ADCs, using the FPGA's high-speed LVDS I/Os to sample current shunts at sub-microsecond resolution.
추천
Serial Protocol Converters / CPRI Fronthaul
The integrated transceivers make the EP4CGX22CF19C8 a natural fit for CPRI, OBSAI, or Serial RapidIO base-station fronthaul interfaces operating at 614.4 Mbps to 3.072 Gbps. Logic resources handle the MAC-layer framing, scrambling/descrambling, and timing adjustments. The 324-ball F19 package allows up to four full-duplex transceiver channels plus 150 LVCMOS/LVDS user I/Os for backplane connections. Designers typically run the analog supply (VCCA) and PLL supply from low-noise LDO regulators to minimize jitter on the recovered clock.
추천
Low-Cost ASIC Prototyping / I/O Expansion
Designers using the EP4CGX22CF19C8 as an ASIC prototype benefit from the 21,280 logic elements, which approximate small-to-medium ASIC gate counts, and from the embedded transceivers that map directly to common ASIC SerDes macros. The device is also widely deployed as a general-purpose I/O expander and level shifter on legacy industrial backplanes, using its 150 user I/Os to bridge 3.3 V logic to 1.8 V or 5 V domains. Quartus II's incremental compilation allows fast iterative debug during prototype bring-up.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP4CGX22CF19C8 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP4CGX22CF19C8N | EP4CGX22CF19C7N | EP4CGX22IF19C8N | EP4CGX22CF19C6N | EP4CGX22BF14C8N |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 324-ball FBGA (F19, 1.0mm) | 324-ball FBGA (F19, 1.0mm) | 324-ball FBGA (F19, 1.0mm) | 324-ball FBGA (F19, 1.0mm) | 324-ball FBGA (F19, 1.0mm) | 169-ball FBGA (F14, 1.0mm) |
| Logic Elements | 21,280 | 21,280 | 21,280 | 21,280 | 21,280 | 21,280 |
| Embedded Memory (bits) | 774,144 | 774,144 | 774,144 | 774,144 | 774,144 | 774,144 |
| Embedded 18x18 Multipliers | 80 | 80 | 80 | 80 | 80 | 80 |
| Maximum User I/Os | 150 | 150 | 150 | 150 | 150 | Up to 72 (F14 package) |
| Transceiver Data Rate (max) | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps (fewer channels) |
| Speed Grade | C8 | C8 | C7 (faster) | C8 | C6 (slower) | C8 |
| Temperature Grade | Commercial (0C to 85C) | Commercial (0C to 85C) | Commercial (0C to 85C) | Industrial (-40C to 100C) | Commercial (0C to 85C) | Commercial (0C to 85C) |
주요 차별점
- Integrated 3.125 Gbps transceivers at low LE count (vs EP4CE22F19C8N (Cyclone IV E))
- Faster speed grade available in same package (vs EP4CGX22CF19C8N (same C8 speed grade, Pb-free variant))
- Industrial temperature option with identical pinout (vs EP4CGX22CF19C8N (commercial 0C to 85C))
설계 노트
Estimated: the EP4CGX22CF19C8 requires at least three separate supply rails - core VCCINT (1.2 V), I/O VCCIO (1.2 V to 3.3 V depending on bank), analog VCCA (2.5 V) for the transceiver PLLs, and VCCD_PLL (1.2 V) for the digital PLL blocks. Designers must sequence VCCINT before VCCIO per the Cyclone IV GX device handbook power-on sequencing guidelines; failure to sequence correctly can trigger high inrush current and latch-up. Use a dedicated LDO such as an LT3080 for VCCA to minimize jitter on the recovered transceiver clock.
Transceiver channels must be routed as 100 ohm differential pairs with length matching better than 150 mils within a channel and better than 1500 mils between channels for the F19 package. The reference clock pair has even tighter matching tolerance. The FBGA escape routing requires microvia or via-in-pad technology on the top layer; the 1.0 mm ball pitch is at the practical limit of standard 4-mil trace-and-space outer-layer PCB fabrication.
A common mistake is choosing the Cyclone IV E (EP4CE22) instead of Cyclone IV GX (EP4CGX22) because the logic-element counts look identical on paper. The E variant has no multi-gigabit transceivers; designs that require PCIe, Gigabit Ethernet, Serial RapidIO, or any 600 Mbps+ serial protocol will not work without adding an external PHY chip. Always confirm the GX designation when transceivers are required.
규정 준수 정보
RoHS and REACH compliance per Intel product declaration for Cyclone IV GX family. AEC-Q100 not applicable (this is commercial grade, not automotive qualified). Lead-free (Pb-free) reflow-compatible per JEDEC J-STD-020 MSL3 profile at 260C peak.
