EP4CGX30BF14C6N - Cyclone IV GX FPGA, 30K LE, 169-FBGA | Intel
부품 번호: EP4CGX30BF14C6N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $35.2 | $352.00 |
| 100 | $31.8 | $3,180.00 |
| 500 | $28.4 | $14,200.00 |
| 1,000 | $25.9 | $25,900.00 |
EP4CGX30BF14C6N 개요
An FPGA (field-programmable gate array) is a reprogrammable semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated silicon resources such as block RAM, DSP blocks, and high-speed transceivers. FPGAs sit between general-purpose microcontrollers and fixed-function ASICs: they offer hardware-timed parallelism, deterministic latency, and the ability to be reconfigured in the field - critical for prototyping, low-volume production, and applications where standards evolve after deployment.
Key features include 66 (18x18) hardware multipliers, four full-duplex transceiver channels supporting common serial protocols (PCIe Gen1, GigE, SDI, SATA), PLL-based clock management, and support for external memory interfaces such as DDR2/LPDDR2. The 169-FBGA package exposes user I/O up to 72 pins while keeping board footprint compact.
The Cyclone IV GX architecture combines a logic fabric, MultiTrack interconnect, column- and row-based I/O, and embedded transceivers on a single die, achieving static power roughly half that of Cyclone III at comparable performance. The -C6 speed grade balances timing margin and Fmax; commercial temperature grade (0C to 85C) suits industrial, communication, and consumer designs.
Typical applications include industrial video bridging and broadcast interfaces, low-cost PCIe endpoint cards, motor control and industrial Ethernet, handheld test equipment, and consumer display controllers. Engineers choose EP4CGX30BF14C6N when they need integrated transceivers, low static power, and a Cyclone-class ecosystem without paying the cost premium of higher-density Cyclone IV E parts. Verify transceiver lane count and pin assignment against your PCB land pattern - this 14x14 mm FBGA is footprint-specific to the F14 package code.
드롭인 대체품: EP4CGX30BF14C6N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP4CGX30BF14C6N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Operating Temperature, Transceivers, Process Technology.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP4CGX30BF14C7N
✅ 드롭인✓ 재고 있음
$55.78 / 개
데이터시트 보기 →EP4CGX30BF14C8N
✅ 드롭인✓ 재고 있음
$43.12 / 개
데이터시트 보기 →EP4CGX30BF14I7N
✅ 드롭인✓ 재고 있음
$65.8 / 개
데이터시트 보기 →EP4CGX30BF14A7N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP4CGX30CF19I7N
✅ 드롭인✓ 재고 있음
$76.4 / 개
데이터시트 보기 →EP4CGX30BF14C6N 최대 정격 & 전기적 특성
| Family | Cyclone IV GX |
| Logic Elements (LE) | 29,440 |
| Embedded Memory | 1,105,200 bits |
| Number of I/O | 72 |
| 패키지 | 169-FBGA (F14) |
| Process Technology | 60 nm |
| Core Voltage | 1.2 V |
| Transceivers | 4 channels, up to 3.125 Gbps |
| Hardware Multipliers (18x18) | 66 |
| PLLs | 4 |
| Speed Grade | C6 |
| 동작 온도 | 0C to +85C (commercial) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
EP4CGX30BF14C6N 169-fbga (f14) 핀 구성 가이드
EP4CGX30BF14C6N(169-fbga (f14) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP4CGX30BF14C6N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP4CGX30BF14C6N 적합 용도: 6 애플리케이션s: Industrial Video Bridge, Low-Cost PCIe Endpoint Card, Industrial Ethernet Switch / Motor Control, Handheld Test and Measurement, Consumer Display Controller, Software-Defined Radio Front End.
Industrial Video Bridge
The EP4CGX30BF14C6N's integrated 3.125 Gbps transceivers and SDI protocol IP make it well suited to industrial camera-to-host video bridging. Its 29,440 logic elements handle SDI packetization, color-space conversion, and protocol adaptation; the four transceivers support multi-link SD-SDI, HD-SDI, and 3G-SDI. Power consumption stays below 1.5W typical for the GX core, enabling fanless industrial camera enclosures. Use the dedicated hardware multipliers for lightweight deinterlacing and noise reduction without exceeding logic budget.
추천
Low-Cost PCIe Endpoint Card
The EP4CGX30BF14C6N's PCIe Gen1 hard IP block and integrated transceivers are designed into low-cost PCIe endpoint cards in industrial PCs and test equipment. With 29,440 logic elements and 1.1 Mbits of block RAM, it can host a soft DMA engine plus application register space while leaving headroom for user logic. The 169-FBGA (F14) footprint supports compact board designs under the PCIe card edge constraints.
추천
Industrial Ethernet Switch / Motor Control
The Cyclone IV GX architecture's transceiver channels support industrial Ethernet protocols (EtherCAT, PROFINET, Sercos) when paired with appropriate PHYs and soft IP, while the 66 hardware multipliers accelerate field-oriented motor control loops. Industrial temperature variants of the F14 footprint (e.g., EP4CGX30BF14I7N) extend operation to -40C to 100C, suitable for factory floor and motor drive enclosures.
추천
Handheld Test and Measurement
Battery-powered test instruments benefit from the EP4CGX30BF14C6N's low static power and integrated transceivers, which handle high-bandwidth probe data without needing a separate PHY. The 169-FBGA package keeps PCB area small for handheld form factors, and the commercial 0C to 85C grade suits typical indoor operating environments. With 1.1 Mbits of embedded memory, the device can buffer waveform captures before USB/Ethernet upload.
추천
Consumer Display Controller
Display controller designs - including HDMI repeaters, LCD timing controllers, and projector scalers - use the EP4CGX30BF14C6N's transceiver channels for high-speed video input and its logic fabric for scaler and OSD overlay. The four 3.125 Gbps transceivers support HDMI 1.4 (TMDS) link rates and DisplayPort auxiliary channels. 1.1 Mbits of embedded memory buffers scan-line data without external SDRAM in many designs.
추천
Software-Defined Radio Front End
The EP4CGX30BF14C6N's transceiver channels and hardware multipliers implement SDR front-end functions including DDC/DUC, channelization, and baseband processing. The 66 (18x18) multipliers handle FIR filters efficiently, and the four transceivers accommodate ADC/DAC data and auxiliary control links. Use the PLL resources to generate low-jitter sample clocks for high-performance converters.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP4CGX30BF14C6N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP4CGX30BF14C7N | EP4CGX30BF14C8N | EP4CGX30BF14I7N | EP4CGX30BF14A7N | EP4CGX30CF19I7N |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 169-FBGA (F14) | 169-FBGA (F14) - same | 169-FBGA (F14) - same | 169-FBGA (F14) - same | 169-FBGA (F14) - same | 196-FBGA (F19) - NOT same footprint |
| Logic Elements | 29,440 | 29,440 | 29,440 | 29,440 | 29,440 | 29,440 |
| Embedded Memory | 1,105,200 bits | 1,105,200 bits | 1,105,200 bits | 1,105,200 bits | 1,105,200 bits | 1,105,200 bits |
| Speed Grade | C6 | C7 (slower) | C8 (slowest) | I7 (industrial) | A7 (automotive-like) | I7 (industrial) |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C | 0C to +85C | -40C to +100C (industrial) | -40C to +125C (extended) | -40C to +100C (industrial) |
| Transceivers | 4 ch, 3.125 Gbps | 4 ch, 3.125 Gbps | 4 ch, 3.125 Gbps | 4 ch, 3.125 Gbps | 4 ch, 3.125 Gbps | 4 ch, 3.125 Gbps |
주요 차별점
- Integrated 3.125 Gbps transceivers on a low-cost Cyclone IV die (vs EP4CE40F23C8N (Cyclone IV E))
- 29,440 logic elements at C6 speed grade (vs EP4CGX22BF14C8N (C8))
- Same die as industrial-grade OPNs (vs EP4CGX30BF14I7N (industrial))
설계 노트
The 169-FBGA (F14) package uses a fine-pitch ball grid that requires a carefully designed PCB land pattern with non-solder-mask-defined (NSMD) pads. Per Altera's Cyclone IV GX handbook, use 0.4 mm ball pitch with 0.25 mm pad diameter and microvia-in-pad or via-on-pad for breakout routing. Maintain a continuous reference plane under the BGA to control impedance for transceiver channels; signal integrity on multi-gigabit links depends on this.
Estimated: Cyclone IV GX core and I/O power together at 100% transceiver utilization and 50% toggle rate is typically 1.0-1.5W. Provide at least four 0.1uF plus one 10uF decoupling capacitor bank around the package, plus bulk capacitance on each supply rail. The PLL analog supply (VCCA_PLL) must be filtered separately from the digital core to minimize jitter. Use the Altera PowerPlay early power estimator before layout to size the power tree accurately.
Transceiver channels operating at 3.125 Gbps require controlled-impedance differential routing (typically 100 ohm differential, with intra-pair skew under 1 ps/mm). Maintain continuous ground reference under transceiver traces, and stitch ground vias along the route to suppress common-mode resonance. Reference the Altera Cyclone IV GX Transceiver User Guide for pre-emphasis and equalization settings if the link budget is tight.
Do not confuse Cyclone IV GX (with transceivers) with Cyclone IV E (no transceivers) - the OPN prefix EP4CGX indicates GX. The package code F14 is the only 169-ball FBGA option; do not assume compatibility with F169 or F256 package codes used in higher-density Cyclone IV GX parts. Verify JTAG chain and configuration scheme (AS, PS, JTAG) match your board before PCB commit.
규정 준수 정보
RoHS and lead-free status per Intel/Altera product page. Not AEC-Q100 qualified; choose EP4CGX30BF14A7N for extended temperature grades. Halogen-free status not stated in the verified data.
