EPC4F324C8N - Enhanced Configuration Device | Altera
부품 번호: EPC4F324C8N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $17.3577 | $17.36 |
| 10 | $17.3577 | $173.58 |
| 100 | $17.3577 | $1,735.77 |
| 500 | $17.3577 | $8,678.85 |
| 1,000 | $17.3577 | $17,357.70 |
EPC4F324C8N 개요
An enhanced configuration device is a semiconductor used to load configuration data into an SRAM-based FPGA or other programmable logic device. It sits in the system hierarchy between nonvolatile storage and the target programmable device, supporting configuration at power-up or during reprogramming. This category is distinct from an FPGA itself: the configuration device stores and delivers the FPGA configuration bitstream, while the FPGA implements the user-defined logic.
The key verified function is enhanced configuration for SRAM-based LUT devices. The MPN also indicates a C8 speed designation, but the verified data does not provide a numerical speed grade, so that characteristic remains unquantified. The retrieved sources identify Altera as the manufacturer and associate the component with configuration applications. The exact pinout, package dimensions, supported interface voltage, and configuration memory capacity require manufacturer documentation or a controlled product record before board design.
For system architecture, EPC4F324C8N should be evaluated as a configuration-memory component rather than as the programmable logic that performs application processing. Its suitability depends on compatibility with the target FPGA, the required configuration mode, interface timing, package land pattern, operating voltage, and the exact configuration-device family specification. The available search results do not establish those detailed ratings, so designers should not infer them from the EPC naming pattern or from the unrelated EP1C4F324C8N results.
Typical applications include loading configuration data into SRAM-based Altera FPGA designs, providing nonvolatile storage for reproducible power-up programming, and supporting controlled reprogramming or recovery in laboratory, industrial, communications, and embedded systems. It is especially relevant where the target programmable device uses an external configuration memory rather than relying only on a volatile configuration source.
The principal design consideration is source validation. Confirm the complete ordering code, package, pinout, voltage limits, timing, target-device compatibility, and configuration protocol from the official Altera documentation and approved purchasing records. Do not substitute EP1C4F324C8N or EP3C40F324C8N listings for EPC4F324C8N without verified equivalence.
This product record separates confirmed information from unverified inference: it consolidates the manufacturer identity, device function, current source links, package key limitation, and drop-in cross-reference results. Pricing and availability should be treated as point-in-time information as of 2026-09-11, and missing engineering parameters must be obtained before release to manufacturing.
드롭인 대체품: EPC4F324C8N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPC4F324C8N (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Operating Temperature, Configuration Clock Frequency, Configuration Interface, Manufacturer.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPC4F324C8N
✅ 드롭인✓ 재고 있음
$17.3577 / 개
데이터시트 보기 →EPC448PC-45A
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$7.1 / 개
데이터시트 보기 →EPC40C100N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$24.75 / 개
데이터시트 보기 →EPC20C100
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EPC16QI100
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$15.4 / 개
데이터시트 보기 →EPC4F324C8N 최대 정격 & 전기적 특성
| Manufacturer | Intel / Altera |
| Product Type | Enhanced configuration device |
| Target Device | SRAM-based LUT devices |
| MPN | EPC4F324C8N |
EPC4F324C8N standard 핀 구성 가이드
EPC4F324C8N(standard 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EPC4F324C8N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EPC4F324C8N 적합 용도: 6 애플리케이션s: SRAM-Based FPGA Power-Up Configuration, Embedded Reprogramming and Recovery, Industrial FPGA Control Equipment, Communications FPGA Platforms, Laboratory and Development FPGA Systems, Nonvolatile FPGA Configuration Storage.
SRAM-Based FPGA Power-Up Configuration
EPC4F324C8N is identified by the verified source as an enhanced configuration device for SRAM-based LUT devices. That makes it a candidate for the nonvolatile configuration path used when a programmable device must initialize after power is applied. The device should be placed between the system's stored configuration source and the target FPGA, subject to confirmation of interface voltage, timing, and pin compatibility. The target is configuration delivery, not application logic execution. The supplied evidence confirms the device category but not configuration capacity, maximum clock frequency, supported FPGA family, or package details, so those values must be checked in official documentation before schematic release. It should not be confused with EP1C4F324C8N, which the verified DigiKey result identifies as a Cyclone FPGA rather than a configuration device.
추천
Embedded Reprogramming and Recovery
A configuration device can support a system that must reload a programmable device after reset, field update, or recovery operation. EPC4F324C8N is relevant when the design uses SRAM-based LUT devices and requires the configuration function to be separated from the logic fabric. The design benefit is architectural: configuration memory can remain a dedicated subsystem, allowing the application processor or service equipment to manage a controlled reload sequence. The verified data does not provide a programming voltage, interface protocol, write endurance, or update behavior, so the circuit must not be assigned those functions without a manufacturer specification. Confirm that the selected part supports the target FPGA and that its control, clock, data, power, and ground assignments match the intended board. Use the exact EPC4F324C8N ordering code when purchasing or approving substitutions.
추천
Industrial FPGA Control Equipment
EPC4F324C8N can be considered for industrial FPGA control equipment that needs repeatable initialization of an SRAM-based LUT device. A separate configuration device is useful when the control platform must define startup behavior independently of the host processor or when configuration storage is part of a dedicated maintenance path. The verified sources establish only the general configuration-device function; they do not establish industrial temperature qualification, supply range, package robustness, or reliability metrics. Therefore, the part's use in industrial equipment requires additional qualification against the official datasheet, quality declarations, and the target FPGA's supported configuration methods. The board implementation should also include the required local bypassing, defined reset sequencing, and a verified programming procedure. No thermal or environmental rating is claimed in this record because the required data is absent.
추천
Communications FPGA Platforms
In communications equipment, EPC4F324C8N may be used where a SRAM-based LUT device requires a dedicated configuration resource during system startup or reconfiguration. The configuration path can help define deterministic loading of the programmable logic used in interface, protocol, or signal-processing functions. The verified material supports the broad system role but does not provide timing, capacity, voltage, or package information, so the part cannot yet be selected for a particular line card or communications standard. Engineers should first identify the target FPGA and confirm that EPC4F324C8N supports the required configuration mode and data format. They should also compare startup timing, inrush behavior, and board-routing requirements with the target system's timing budget. Related configuration-device MPNs are listed only as engineering leads, not approved drop-in replacements.
추천
Laboratory and Development FPGA Systems
EPC4F324C8N is a possible component in laboratory or development systems that need a dedicated configuration path for SRAM-based programmable logic. It can help keep the configuration process separate from the application logic and can simplify repeatable testing of alternate FPGA configurations. The verified source identifies the part as an enhanced configuration device, but it does not provide development-board support, programming-tool support, configuration memory depth, or package information. Before using it on a prototype, confirm the official programming procedure, required adapter or cable, target-device compatibility, and electrical operating limits. Keep the exact MPN visible in purchase and laboratory records because the similarly named EP1C4F324C8N is a different Cyclone FPGA listing. Until an approved cross-reference is available, treat every other configuration-device MPN as an unverified candidate.
추천
Nonvolatile FPGA Configuration Storage
EPC4F324C8N can be evaluated as the nonvolatile configuration storage element in a system built around an SRAM-based LUT device. Its intended role is to support loading the programmable device, not to replace the FPGA's logic resources or general system memory. This separation can make startup behavior and configuration ownership easier to define, but the verified data does not specify storage capacity, retention, programming cycles, interface voltage, or supported target devices. Consequently, the part cannot be released into a nonvolatile-storage design until those characteristics are confirmed from manufacturer documentation. The circuit should include a reviewed power sequence, local decoupling appropriate to the final specification, and a programming path that is compatible with the selected FPGA. Any same-package alternative must be validated for capacity, timing, pinout, and configuration protocol.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPC4F324C8N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPC4F324C8N | EPC448PC-45A | EPC40C100N | EPC20C100 | EPC16QI100 |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Product Type | Enhanced configuration device | Enhanced configuration device | Configuration-device family candidate | Configuration-device family candidate | Configuration-device family candidate | Configuration-device family candidate |
| Verified Drop-In Status | No replacement claim | Reference part | Unverified candidate | Unverified candidate | Unverified candidate | Unverified candidate |
주요 차별점
- Target function is configuration-memory support (vs EP1C4F324C8N)
- Exact target identity is preserved (vs EPC448PC-45A)
- No unsupported cross-brand substitute claim (vs EPC40C100N)
설계 노트
Do not use the similarly named EP1C4F324C8N or EP3C40F324C8N results as a substitute for EPC4F324C8N. The verified sources identify EP1C4F324C8N as a Cyclone FPGA, while the target is an Altera enhanced configuration device for SRAM-based LUT devices. Product-family resemblance in an MPN is not evidence of compatible function, package, pinout, voltage, or timing. Maintain the exact target MPN in the BOM, schematic, procurement record, and approved-vendor list. Before release, obtain the official EPC4F324C8N datasheet and compare the package drawing, configuration capacity, target-device support, and interface requirements against the intended FPGA.
The supplied data does not provide the operating voltage, current consumption, or power-up limits for EPC4F324C8N. Therefore, no capacitor value, current budget, or thermal estimate is safe to assert. Use the official electrical tables to determine the permitted supply range, sequencing requirements, and decoupling recommendations. After those values are available, place the required local bypass network close to the power and ground pins, define the reset and configuration-enable states, and verify startup behavior with the target SRAM-based LUT device. Any thermal analysis must use measured or manufacturer-published dissipation and thermal-resistance data.
The exact package and pinout for EPC4F324C8N are not present in the verified material, so a footprint cannot be responsibly generated from the MPN alone. Obtain the official package drawing and confirm the pin count, ball or lead numbering, exposed pad if any, package dimensions, and recommended land pattern. Route clock, configuration data, control, power, and ground connections according to that document, keeping configuration and clock traces away from noisy switching regions. Confirm the target FPGA's configuration interface and ensure that voltage levels, reset timing, and direction control agree before PCB fabrication.
규정 준수 정보
The verified material does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for EPC4F324C8N.
