Quectel의 FC64EAAM2 - Wi-Fi 6 + BT 5.2 M.2 Eval Board | Quectel FC64EAAM2 - 전자 부품
Quectel

FC64EAAM2 - Wi-Fi 6 + BT 5.2 M.2 Eval Board | Quectel

부품 번호: FC64EAAM2 ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
3.3 V to 5 V DC Vdss 2.4 GHz, 5 GHz Speed
시작가 $17.24 USD / 개
MOQ: 1 |
가격 업데이트: 2026-10-19
볼륨 가격
수량 단가 합계
1 $21.55 $21.55
10 $20.47 $204.70
100 $19.4 $1,940.00
500 $18.32 $9,160.00
1,000 $17.24 $17,240.00
ℹ️ 모든 가격은 USD 기준입니다
데이터시트 보기 (PDF) 대체품 보기

FC64EAAM2 개요

The Quectel FC64EAAM2 is an M.2-format evaluation board for the FC64E module, a high-performance Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and Bluetooth 5.2 combo transceiver supporting 2.4 GHz and 5 GHz bands with 2x2 + 2x2 MIMO and data rates up to 3000 Mbps. The board operates from a 3.3 V to 5 V DC supply, measures 83 x 80 mm, and provides PCIe, PCM, and UART interfaces plus an external antenna RF connector.

A Wi-Fi module evaluation board is a carrier card that exposes all interfaces of a wireless module - PCIe for host connectivity, UART for configuration and diagnostics, PCM for Bluetooth audio - so engineers can prototype, test RF performance, and develop drivers before committing to a custom PCB. Evaluation boards belong to the RF development tools hierarchy: development boards > wireless modules > RF & wireless components.

Key features include full Wi-Fi 6 (802.11ax) support with OFDMA and MU-MIMO for high-density environments, Bluetooth 5.2 with BLE for low-power links, SMT-based LCC module packaging for durable designs, and laser-engraved marking for traceability. The M.2 form factor matches the slot used in laptops, industrial PCs, and edge gateways, making the evaluation flow directly representative of the end design.

Technically, the FC64E module delivers maximum PHY rates of up to 3000 Mbps across its dual-band MIMO chains. The PCIe host interface targets high-throughput embedded computing platforms, while UART and PCM enable control-plane and audio use cases. The FC6xE series also includes the FC66E variant supporting Wi-Fi 6E (6 GHz band) for tri-band designs.

Typical applications include industrial edge gateways, network video recorders, smart retail terminals, and embedded computing platforms that need Wi-Fi 6 plus Bluetooth connectivity.

Design tip: validate antenna placement early using the external RF connector, since M.2 host boards vary widely in ground-plane geometry and RF detuning is the most common cause of range shortfall.

This page synthesizes distributor pricing, availability, and drop-in-family alternatives not found in a single manufacturer datasheet.

드롭인 대체품: FC64EAAM2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

FC66EAAM2

✅ 드롭인 ⚠️ 사양 미검증
📦 M.2 evaluation board
same FC6xE family and M.2 eval-board format, adds Wi-Fi 6E 6 GHz band and BT 5.3 (vs BT 5.2), otherwise host-compatible

📋 참조 대체품 (카탈로그에 없음)

FC64EAAM2 사양 (제조사 공개)

Product Type Wi-Fi 6 + Bluetooth 5.2 evaluation board (M.2)
Wireless Protocols 802.11 a/b/g/n/ac/ax (Wi-Fi 6/WLAN), Bluetooth 5.2 (BLE)
Frequency Bands 2.4 GHz, 5 GHz
MIMO Configuration 2x2 + 2x2 MIMO
Maximum Data Rate up to 3000 Mbps (FC6xE series)
Host Interface PCIe
Other Interfaces PCM, UART
Antenna Type External RF connector
공급 전압 3.3 V to 5 V DC
Dimensions 83 x 80 mm
Form Factor M.2
Module Series Quectel FC64
Module Packaging LCC (SMT)
MSL 레벨 MSL 3
RoHS Yes

FC64EAAM2 인터페이스 및 커넥터

FC64EAAM2은(는) 제조사에서 공개한 대로 다음 인터페이스와 커넥터를 제공합니다: 무선, 전력 입력. 확장 헤더 핀아웃, 커넥터 핀 번호, 전기적 한계는 제조사 문서에 정의되어 있습니다.

무선 802.11 a/b/g/n/ac/ax (Wi-Fi 6/WLAN), Bluetooth 5.2 (BLE)
전력 입력 3.3 V to 5 V DC

다음을 참조하십시오: 제조사 문서 전체 확장 헤더 핀아웃 및 커넥터 핀 번호는 다음을 참조하십시오.

전력 및 열 특성

전력 입력 3.3 V to 5 V DC

제조사에서 공개한 FC64EAAM2의 전력 입력 및 열 파라미터입니다.

일반적인 애플리케이션

FC64EAAM2 적합 용도: 6 애플리케이션s: Industrial Edge Gateways, Network Video Recorders and IP Surveillance, Embedded Computing and Industrial PCs, Smart Retail and Digital Signage, Bluetooth Audio Development, Wireless Driver and Firmware Development.

🏭

Industrial Edge Gateways

Industrial edge gateways aggregate sensor, PLC, and camera traffic and backhaul it over WLAN. The FC64EAAM2 lets gateway developers validate Wi-Fi 6 (802.11ax) performance - OFDMA scheduling and 2x2+2x2 MIMO up to 3000 Mbps - before committing to the FC64E module on the production carrier. The PCIe host interface matches standard x86/ARM COM express and SMARC compute modules, so the M.2 evaluation slot mirrors the final integration exactly. UART provides console access for driver bring-up and roaming tuning, while the external antenna connector enables representative RF testing with the actual gateway antenna placement.

추천

FC64E (Production Wi-Fi 6/BT module evaluated by this board) FC66E (Wi-Fi 6E sibling module for tri-band upgrade path)
🎥

Network Video Recorders and IP Surveillance

Video recorders and wireless camera hubs need sustained multi-stream throughput. The FC64EAAM2 exposes the FC64E module's PCIe interface so developers can measure real TCP/UDP throughput under multiple concurrent 4K camera streams, validating that 802.11ax aggregation and 2x2+2x2 MIMO meet their margin requirements on the 5 GHz band. Bluetooth 5.2 supports commissioning and BLE-based device onboarding in the same silicon. Because the M.2 form factor is identical to the slot used in NVR motherboards, driver and firmware work on the evaluation board transfers directly, and the external RF connector supports conducted lab testing with a spectrum analyzer.

추천

FC64E (Wi-Fi 6 module for NVR production design)
🖥️

Embedded Computing and Industrial PCs

Industrial PCs, thin clients, and medical panel computers commonly provide an M.2 Wi-Fi slot, making FC64EAAM2 the natural prototyping vehicle. Engineers can qualify the FC64E's Wi-Fi 6 radio on their exact host BIOS/driver stack - PCIe link training, power management, and antenna placement - using this board in place of a soldered module. The 3.3-5 V supply range covers standard M.2 slot power, and UART/PCM sidebands allow diagnostics and Bluetooth audio feature work. SMT LCC packaging of the target module is rated by Quectel as ideal for durable, rugged designs suited to fanless industrial enclosures.

추천

FC64E (M.2-class module for embedded host designs)
📺

Smart Retail and Digital Signage

Smart retail terminals, POS systems, and digital signage players rely on robust dual-band Wi-Fi in RF-congested malls and stores. The FC64EAAM2 allows developers to benchmark 802.11ax roaming, OFDMA latency, and 5 GHz throughput in real store conditions using external antennas identical to the production ones. Bluetooth 5.2 with BLE enables beacon interaction and peripheral pairing (printers, scanners) without extra silicon. The PCIe interface integrates with typical signage SoC platforms, and the eval board's UART console simplifies diagnosing coexistence issues between WLAN traffic and BT peripherals before release.

추천

FC64E (Wi-Fi 6 + BT 5.2 module for retail terminals)
🎧

Bluetooth Audio Development

The FC64E module's PCM interface makes the FC64EAAM2 suitable for Bluetooth audio product development, including headsets, speakers, and infotainment nodes. Developers can validate A2DP and HFP-class links over Bluetooth 5.2, measure PCM clock accuracy, and tune codec latency against external audio codecs connected via the exposed PCM bus. The UART channel handles HCI command traffic independently of the audio path, mirroring production host architectures. Because the eval board also carries full Wi-Fi 6 capability, combined audio + WLAN coexistence scenarios - a common failure mode in 2.4 GHz products - can be characterized on the same bench setup.

추천

FC64E (BT 5.2 module with PCM audio interface)
🧩

Wireless Driver and Firmware Development

OS vendors and BSP teams use the FC64EAAM2 to port and certify Wi-Fi 6/BT drivers on Linux and Windows hosts. The M.2 PCIe form factor plugs directly into reference laptops, industrial PCs, and single-board computers, enabling regression testing of kernel drivers, regulatory-domain configurations, and power-save behavior. The external antenna connector supports conducted pre-scan testing ahead of regulatory certification, and UART console access accelerates firmware debugging. Since the FC6xE series (FC64E/FC66E) shares architecture and software, work done on this board also de-risks Wi-Fi 6E variants with minimal re-validation.

추천

FC64E (Target module for driver certification) FC66E (Wi-Fi 6E variant sharing software stack)

추천 제품 요약

FC64E Production Wi-Fi 6/BT module evaluated by this board 사용처: Industrial Edge Gateways, Network Video Recorders and IP Surveillance, Embedded Computing and Industrial PCs, Smart Retail and Digital Signage, Bluetooth Audio Development, Wireless Driver and Firmware Development FC66E Wi-Fi 6E sibling module for tri-band upgrade path 사용처: Industrial Edge Gateways, Wireless Driver and Firmware Development
What is the Quectel FC64EAAM2 evaluation board?
The FC64EAAM2 is an M.2-format evaluation board for the Quectel FC64E module, a Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and Bluetooth 5.2 combo transceiver. It covers 2.4 GHz and 5 GHz bands with 2x2 + 2x2 MIMO, exposes PCIe, PCM and UART interfaces, uses an external antenna RF connector, and runs from a 3.3-5 V DC supply. Per DigiKey, it is categorized as an RF evaluation board (2958-FC64EAAM2-ND) for WLAN and Bluetooth development.
Where to buy FC64EAAM2 online and what is the price?
The FC64EAAM2 can be purchased from authorized distributors including DigiKey (2958-FC64EAAM2-ND), Mouser, TrustedParts, and SoSelectronic, where it was listed around 19.90 EUR excluding VAT. Per Octopart, pricing is available from 2 distributors as of 2026-10-19. XAIPART lists tier pricing starting at approximately USD 21.55 at qty 1; always confirm live pricing before ordering since RF dev-board pricing changes with module supply.
Is FC64EAAM2 in stock and what is the lead time?
Availability varies by distributor: DigiKey's listing states 'Buy now, ships today', indicating same-day shipment from stock, while Micro-Semiconductor shows 0 pcs in stock requiring a quote-based lead time. Because DigiKey and Mouser both carry the part as active, standard lead time for stocked quantities is 1-3 days, but non-stocked quantities should be confirmed with the distributor before committing to a production schedule.
What is the difference between FC64E and FC66E modules?
Both are part of Quectel's FC6xE series of Wi-Fi 6/6E and Bluetooth 5.3 LCC modules supporting 2x2 + 2x2 MIMO up to 3000 Mbps. The FC64E supports Wi-Fi 6 on 2.4 GHz and 5 GHz bands, whereas the FC66E adds Wi-Fi 6E support for the 6 GHz band, enabling tri-band operation. Software architecture and SMT LCC packaging are family-consistent, but the 6 GHz radio capability is exclusive to the FC66E.
What is the best drop-in replacement for FC64EAAM2?
There is no verified pin-to-pin drop-in replacement in the cross-reference data, because FC64EAAM2 is an evaluation board rather than a solderable component. Within the same-brand family, the FC66E-based evaluation hardware is the closest upgrade path (same FC6xE series, adds Wi-Fi 6E 6 GHz support). For production designs, evaluate the FC64E module itself rather than the eval board, and confirm M.2/PCIe host compatibility during prototyping.
Where to download the FC64EAAM2 datasheet PDF?
The official documentation is available from Quectel's product page at quectel.com/product/wi-fi-bluetooth-fc64e, which links the FC64E module datasheet and related hardware design guides. Datasheet aggregators such as GlobalSpec and distributor pages (DigiKey, Mouser, Ampheo) also mirror the PDF download. Note that the FC64EAAM2 evaluates the FC64E module, so the authoritative electrical and RF specifications reside in the FC64E module datasheet, not a board-specific document.
What interfaces does the FC64EAAM2 support?
The FC64EAAM2 supports PCIe as the primary host data interface, UART for control and diagnostics, and PCM for Bluetooth audio, with connectivity via an external antenna RF connector. The underlying FC64E module is documented by SoSelectronic as offering 'Antenna, PCIe, PCM, UART' interfaces in M.2 format. This interface set suits embedded hosts such as x86 or ARM platforms that expose an M.2 slot with PCIe lanes and USB/UART sideband signals.
What are the key specifications of FC64EAAM2 that engineers should know?
Key facts: Wi-Fi 6 (802.11ax) plus Bluetooth 5.2; 2.4 GHz and 5 GHz dual-band operation; 2x2 + 2x2 MIMO with up to 3000 Mbps PHY rate; PCIe host interface with UART and PCM sidebands; 3.3-5 V DC supply; 83 x 80 mm board; M.2 format; external antenna connector; MSL 3; RoHS compliant. Source: Quectel FC64E product page and distributor listings (SoSelectronic, DigiKey), verified 2026-10-19.
What supply voltage does the FC64EAAM2 require?
The FC64EAAM2 operates from a 3.3 V to 5 V DC supply according to the SoSelectronic and ElectricalNew distributor specifications. In practice, M.2 host slots supply 3.3 V, which sits comfortably inside this window; standalone bench evaluation can use a 5 V USB-style supply with appropriate regulation. Always verify current consumption peaks during TX bursts on the actual FC64E module datasheet when sizing the supply rails.
Can FC64EAAM2 be used for Bluetooth audio development?
Yes, the FC64EAAM2 supports Bluetooth audio development because the FC64E module provides a PCM interface for digital audio transport alongside the Bluetooth 5.2 radio. PCM allows connection to external audio codecs for hands-free and A2DP-class applications. Developers typically route UART for HCI/control traffic and PCM for the audio stream, validating codec latency and clock accuracy on the eval board before designing the custom carrier PCB.
FC64EAAM2 vs FC66E-based evaluation board - which should I choose?
Choose the FC64EAAM2 (FC64E) if your product needs only 2.4 GHz and 5 GHz Wi-Fi 6 with Bluetooth 5.2 - it is the lower-cost, fully compliant option for dual-band designs. Choose an FC66E-based board if you need Wi-Fi 6E with 6 GHz band access for congestion-free spectrum or higher-throughput short-range links. Both share the FC6xE family architecture, MIMO configuration, and SMT LCC packaging, so software investment largely carries over between the two.
Is the FC64EAAM2 suitable for industrial gateways?
Yes, the FC64EAAM2 is suitable for industrial gateway prototyping. The FC64E module's Wi-Fi 6 support with OFDMA and MU-MIMO handles dense multi-client environments typical of factory automation, and the PCIe interface integrates cleanly with industrial x86/ARM compute modules. Quectel positions the FC6xE series SMT LCC packaging as 'ideal for durable, rugged designs'. For final products, transition from the eval board to the FC64E module soldered on the production carrier.
What is the operating temperature range of the FC64EAAM2?
The operating temperature range is not stated in the available distributor data and must be taken from the official FC64E module hardware datasheet on quectel.com. Industrial Wi-Fi modules in this class commonly target extended ranges, but the exact values for the FC64E have not been verified here - do not finalize a thermal design without the manufacturer datasheet figures. Request the hardware design guide from Quectel or your distributor for qualified temperature and humidity limits.
Is FC64EAAM2 the same as the FC64E module?
No. The FC64E is the actual Wi-Fi 6 + Bluetooth 5.2 LCC (SMT) module, while the FC64EAAM2 is its M.2 evaluation board used for development and RF testing. Distributor data describes FC64EAAM2 as an 'EVAL BOARD' in the RF Evaluation and Development Kits category, whereas the FC64E module is the solderable component with laser-engraved marking. In production, you design the FC64E module onto your PCB; the FC64EAAM2 is a development tool only.
What antenna connection does the FC64EAAM2 use?
The FC64EAAM2 uses an external antenna RF connector, per distributor specifications listing 'Antenna Type: External RF Connector Pin'. With 2x2 + 2x2 MIMO across 2.4 GHz and 5 GHz, two antenna feed points are required for full diversity and throughput performance. Use dual-band (2.4/5 GHz) rated antennas matched to 50 ohms, and keep RF cable runs short during evaluation to minimize insertion loss before the sensitivity measurements.

엔지니어링 참조 데이터: FC64EAAM2 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the FC64EAAM2 when you are developing an embedded product on the Quectel FC64E Wi-Fi 6 + Bluetooth 5.2 module and need a realistic M.2 host-slot environment for driver bring-up, RF testing, and antenna evaluation. It is the right tool for dual-band (2.4/5 GHz) designs such as industrial gateways, NVRs, and smart retail terminals where Wi-Fi 6E 6 GHz support is not required - avoiding the cost of FC66E-based hardware. Choose FC66E-based evaluation hardware instead if your roadmap includes the 6 GHz band or LE Audio on Bluetooth 5.3. For mass production, remember the FC64EAAM2 itself is never shipped in products; the FC64E LCC module is the solderable component, and the eval board's layout learnings transfer to your carrier PCB design.

대체품과의 비교

파라미터 이 제품 FC66EAAM2
Package M.2 evaluation board (83 x 80 mm) M.2 evaluation board - same format
Brand Quectel Quectel
Wi-Fi Standard 802.11 a/b/g/n/ac/ax (Wi-Fi 6) 802.11 a/b/g/n/ac/ax/ay-class Wi-Fi 6E (adds 6 GHz)
Bluetooth Version Bluetooth 5.2 (BLE) Bluetooth 5.3
Frequency Bands 2.4 GHz, 5 GHz 2.4 GHz, 5 GHz, 6 GHz
MIMO Configuration 2x2 + 2x2 2x2 + 2x2
Maximum Data Rate up to 3000 Mbps (series) up to 3000 Mbps (series)
Host Interface PCIe + UART + PCM PCIe + UART + PCM

주요 차별점

  • Wi-Fi 6 dual-band at FC6xE entry cost (vs FC66EAAM2)
  • Bluetooth 5.2 with dedicated PCM interface (vs FC66EAAM2)
  • True M.2 host-slot representation (vs FC64E module (bare))

설계 노트

The FC64EAAM2 uses an external antenna RF connector, so choose dual-band (2.4/5 GHz) antennas rated 50 ohms with VSWR under 2:1 across both bands. Keep pigtail cable runs shorter than 15 cm during evaluation; every 0.5 dB of cable loss directly reduces link budget. When transitioning to the production FC64E module layout, reserve keep-out areas around the module antenna ports per the FC64E hardware design guide to avoid ground-plane detuning.

Supply the board from a 3.3 V to 5 V DC source as specified by distributor data. Wi-Fi 6 TX bursts create current spikes; size the supply for peak TX current of the FC64E module (consult the module datasheet value) plus margin, and place bulk capacitance at the M.2 slot power pins. Undervoltage during simultaneous 2.4 GHz + 5 GHz MIMO TX is the most common cause of intermittent drops on eval setups.

Do not confuse the FC64EAAM2 evaluation board with the FC64E module: the board is a development tool and is not solderable into end products. Also note the FC64E supports only 2.4 GHz and 5 GHz - if your requirement includes the 6 GHz band (Wi-Fi 6E), select the FC66E variant instead. Verify regulatory domain settings over UART before field trials, since channel availability varies by region.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Distributor listing (ElectricalNew) states RoHS: Yes. REACH, lead-free and halogen-free status not stated in provided data.

데이터 검증일: 2026-10-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

FC64EAAM2 FC64EAAM2 datasheet Quectel FC64EAAM2 evaluation board FC64EAAM2 price buy Wi-Fi 6 Bluetooth 5.2 M.2 evaluation board FC64E module vs FC66E difference Quectel FC64EAAM2 equivalent replacement 802.11ax 2x2 MIMO PCIe dev board FC64EAAM2 industrial gateway Wi-Fi FC64EAAM2 in stock lead time Quectel FC64E Bluetooth audio PCM development what is FC64EAAM2 evaluation board

관련 부품 & 용어

Quectel FC64EAAM2 FC64E FC66E FC6xE series Wi-Fi 6 802.11ax 802.11 a/b/g/n/ac Bluetooth 5.2 BLE M.2 PCIe UART PCM 2x2 + 2x2 MIMO OFDMA LCC module SMT MSL 3 RoHS evaluation board development board wireless module RF evaluation and development kit industrial edge gateway
빠른 견적 RFQ
영업팀이 24시간 이내에 답변드립니다
부품 번호MfrPkg수량목표 가격
×
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

장바구니 0개 항목
장바구니가 비어 있습니다
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기