Analog Devices

ICL7650CPA+ Zero-Drift Op Amp | Analog Devices | Instrumentation

부품 번호: ICL7650CPA+ ✓ 활성
4.5 V to 16 V Vdss 1.5 pA Id 8-pin plastic dual in-line package, 7.62 mm row spacing Package
MOQ: 1 |

ICL7650CPA+ 개요

The Analog Devices ICL7650CPA+ is a single-circuit chopper-stabilized, zero-drift operational amplifier with approximately 1.5 pA input bias current, 130 dB open-loop gain, and approximately 2 MHz bandwidth. It is supplied in an 8-pin plastic dual in-line package and is intended for precision low-level signal processing.

An operational amplifier is an active analog signal-conditioning device that amplifies the voltage difference between its inverting and non-inverting inputs. The ICL7650 belongs to the zero-drift operational-amplifier family, using chopper stabilization to reduce offset-voltage drift. This places it within the hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and integrated circuit.

The principal advantages of the ICL7650CPA+ are its exceptionally low input bias current of 1.5 pA, 130 dB instrumental open-loop gain, and low-drift architecture. These characteristics are valuable when measuring currents from high-impedance sensors, strain-gauge bridges, electrochemical cells, and high-impedance transducers. The approximately 2 MHz bandwidth also allows the amplifier to process signals substantially above the static precision region of many conventional precision amplifiers.

Analog Devices describes the ICL7650 and ICL7653 as chopper-stabilized amplifiers combining low input offset voltage, low input bias current, wide bandwidth, and low drift. Chopper stabilization continuously corrects offset-related errors, making the device suitable for instrumentation where drift over time and temperature can dominate measurement accuracy. The device operates from a 4.5 V to 16 V supply, corresponding to approximately ±2.25 V to ±8 V bipolar capability.

Typical uses include pH and conductivity probes, biomedical instrumentation, pressure and force sensors, low-current measurements, and precision signal conditioning. Its low bias current reduces input-loading error when the source impedance is high. Designers should still account for input capacitance, guard-ring leakage, supply bypassing, and the chopping-frequency components described in the manufacturer documentation.

For optimal performance, connect the input and bypass capacitors close to their associated pins, use clean grounding, and provide adequate PCB area around sensitive analog nodes. Avoid long leakage-prone input traces where possible. Guard techniques can reduce surface leakage when measuring picoampere-level currents.

This page combines the manufacturer's device description with practical considerations for package selection, input-bias-current budgeting, bandwidth trade-offs, and validated drop-in alternatives. The component data is organized for engineers comparing precision amplifier options and designing low-level instrumentation signal chains.

드롭인 대체품: ICL7650CPA+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ICL7650CPA

✅ 드롭인
📦 8-PDIP (7.62 mm row spacing)
Uses the same ICL7650 chopper-stabilized architecture and 8-pin plastic DIP; ordering suffix differs by 0%, while exact temperature and lead-finish terms require confirmation

📋 참조 대체품 (카탈로그에 없음)

ICL7650CPA+ 최대 정격 & 전기적 특성

Amplifier Type Single-circuit chopper-stabilized zero-drift operational amplifier
Number of Circuits 1 circuit
Input Bias Current 1.5 pA
Open-Loop Gain 130 dB
Gain-Bandwidth Product 2 MHz
Supply Voltage Range 4.5 V to 16 V
Total Supply Voltage Range ±2.25 V to ±8 V
패키지 8-pin plastic dual in-line package, 7.62 mm row spacing
실장 유형 Through-hole

ICL7650CPA+ 8-pin plastic dual in-line package, 7.62 mm row spacing 핀 구성 가이드

ICL7650CPA+(8-pin plastic dual in-line package, 7.62 mm row spacing 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ICL7650CPA+의 8-pin plastic dual in-line package, 7.62 mm row spacing 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICL7650CPA+.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICL7650CPA+ 적합 용도: 6 애플리케이션s: High-Impedance Sensor Signal Conditioning, Precision Bridge and Strain-Gauge Measurement, Biochemical and Electrochemical Analysis, Low-Current Measurement and Leakage Testing, Precision Instrumentation Signal Chains, Precision Pressure and Force Measurement.

🧩

High-Impedance Sensor Signal Conditioning

The ICL7650CPA+ fits high-impedance sensor front ends because its approximately 1.5 pA input bias current limits the error voltage introduced across a large source impedance. Use it with pH electrodes, ion-selective electrodes, capacitive sensors, or other sources where leakage and loading can dominate the measurement. Its chopper-stabilized architecture reduces offset drift, while the 130 dB open-loop gain supports accurate closed-loop amplification. Place the amplifier close to the sensor, use guarded input traces, and maintain clean supply bypassing to prevent board leakage from overwhelming the input current.

🏭

Precision Bridge and Strain-Gauge Measurement

The ICL7650CPA+ is appropriate for precision bridge and strain-gauge signals when low offset drift and low input bias current are more important than conventional amplifier simplicity. Its approximately 1.5 pA bias current produces very little error with high-impedance bridge legs, while chopper stabilization minimizes changes in the output caused by input-offset drift. The approximately 2 MHz bandwidth provides useful response beyond the narrow DC range associated with many precision-only amplifiers. Designers should verify the bridge excitation voltage, common-mode range, output swing, and gain configuration before finalizing the amplifier network.

💊

Biochemical and Electrochemical Analysis

The ICL7650CPA+ supports electrochemical analysis circuits that measure very small currents and potentials generated by biochemical probes. Its approximately 1.5 pA input bias current is especially valuable when the transducer has high source impedance, because the amplifier must not load the sensor appreciably. Chopper stabilization reduces the offset drift that otherwise appears as baseline movement during long measurements. Use low-leakage PCB materials, guarded inputs, and clean analog grounding, and confirm the output-voltage range needed by the measurement electronics.

⚡

Low-Current Measurement and Leakage Testing

The ICL7650CPA+ is well suited to picoampere-class current measurements because its approximately 1.5 pA input bias current establishes a low intrinsic error floor. It can support leakage tests of capacitors, semiconductor devices, sensors, and insulation paths when the source impedance is high and the desired bandwidth remains below approximately 2 MHz. The 130 dB open-loop gain provides high closed-loop accuracy in suitable inverting or noninverting circuits. Environmental cleanliness, surface leakage, connector insulation, and guarding are as important as the amplifier's input specifications in this application.

🖥️

Precision Instrumentation Signal Chains

The ICL7650CPA+ fits precision instrumentation signal chains that combine a slow measurement with modest bandwidth requirements. Analog Devices positions the ICL7650 family for low-level signal processing, emphasizing low offset voltage, low bias current, wide bandwidth, and low drift. The 4.5 V to 16 V operating range allows use with single 5 V systems as well as dual positive and negative rails. Place bypass capacitors near the supply pins, maintain a stable reference node, and evaluate chopping-frequency components with the complete downstream filter and converter chain.

📱

Precision Pressure and Force Measurement

The ICL7650CPA+ can amplify outputs from resistive pressure and force sensors when the sensor bridge presents a high source impedance or the required accuracy is governed by drift. Its approximately 1.5 pA bias current minimizes bridge-loading error, and its chopper-stabilized operation improves stability over time and temperature. The approximately 2 MHz bandwidth allows the amplifier to respond to transient events as well as static measurements. Confirm bridge excitation tolerances, input common-mode range, output headroom, and shielding against electrostatic and mechanical noise in the final sensor assembly.

추천 제품 요약

ICL7650 Zero-drift amplifier family used for precision sensor amplification 사용처: High-Impedance Sensor Signal Conditioning, Precision Bridge and Strain-Gauge Measurement, Biochemical and Electrochemical Analysis, Low-Current Measurement and Leakage Testing, Precision Instrumentation Signal Chains, Precision Pressure and Force Measurement
What are the key specifications of ICL7650CPA+ that engineers should know?
The ICL7650CPA+ is a single-circuit chopper-stabilized zero-drift operational amplifier with approximately 1.5 pA input bias current, 130 dB open-loop gain, 2 MHz bandwidth, and a 4.5 V to 16 V supply range. Analog Devices identifies it as an instrumentation amplifier suitable for low-level signal processing, particularly where low offset drift, low bias current, and broad bandwidth are important. It is packaged in an 8-pin plastic DIP.
Where to download the ICL7650CPA+ datasheet PDF?
The ICL7650CPA+ datasheet can be obtained from the Analog Devices ICL7650 product page and the manufacturer data-sheet link. The document covers the ICL7650 and related ICL7653 chopper-stabilized amplifiers, including electrical characteristics, typical applications, pin descriptions, compensation details, and package information. Confirm the ordering suffix and operating-temperature markings against the part marking before releasing a production design.
Where can I find the ICL7650CPA+ pinout?
The ICL7650CPA+ pinout is shown in the Analog Devices ICL7650 manufacturer data sheet. The device uses an 8-pin plastic DIP with a 7.62 mm pin-row spacing. Pin 1 is identified by the package marking, while the remaining connections follow the standard counter-clockwise numbering used for the package. Use the manufacturer's pin-description table when assigning supply, ground, input, and output connections.
What is the operating voltage range of ICL7650CPA+?
The ICL7650CPA+ operates from 4.5 V to 16 V across its supply pins, equivalent to approximately ±2.25 V to ±8 V when both rails are used. The Analog Devices product description identifies the device as a chopper-stabilized amplifier for low-level signal processing. Keep each supply within the absolute maximum limits listed in the manufacturer data sheet and account for supply ripple when designing precision measurement paths.
Why is the ICL7650CPA+ suitable for high-impedance sensor measurements?
The ICL7650CPA+ is suitable for high-impedance sensors because its input bias current is approximately 1.5 pA. That low current limits the voltage error created when flowing into a high source impedance, which is important for pH probes, electrochemical sensors, and high-impedance transducers. Its chopper-stabilized architecture also reduces time- and temperature-dependent offset drift for stable low-level measurements.
How does zero-drift stabilization help the ICL7650CPA+?
Zero-drift stabilization helps the ICL7650CPA+ by continuously correcting offset-voltage errors that would otherwise change with time and temperature. Analog Devices describes the ICL7650 as a chopper-stabilized amplifier with low input offset voltage, low input bias current, wide bandwidth, and exceptionally low drift. This combination supports accurate DC and low-frequency instrumentation while retaining substantially more bandwidth than a purely precision-oriented amplifier.
What is the difference between ICL7650CPA+ and ICL7650CPA?
The ICL7650CPA+ and ICL7650CPA identify orderable versions of the same ICL7650 chopper-stabilized amplifier family and are both associated with an 8-pin plastic DIP. Their primary published distinction is the ordering suffix rather than a change in circuit topology. Before substitution, verify the manufacturer's ordering table for temperature grade, lead-finish status, and any marking changes that apply to the exact suffix.
What can replace the ICL7650CPA+ on the same 8-pin DIP footprint?
The ICL7650CPA is the closest documented drop-in candidate because it uses the same 8-pin plastic DIP and the same ICL7650 chopper-stabilized amplifier architecture. A verified five-part drop-in set could not be established from the available manufacturer and cross-reference records without risking an incorrect pinout or electrical mismatch. Review the manufacturer ordering information and use the Request a Quote form when sourcing a confirmed replacement.
When should I choose ICL7650CPA+ instead of a conventional precision op amp?
Choose the ICL7650CPA+ when the signal source has high impedance and measurement drift is more important than simplicity. Its approximately 1.5 pA input bias current minimizes source-loading error, while chopper stabilization reduces offset drift. A conventional precision amplifier may be preferable when chopping-frequency artifacts, gain limitations, or operating complexity matter more than exceptionally low drift and bias current.
Is the ICL7650CPA+ suitable for instrumentation amplifier applications?
Yes, the ICL7650CPA+ is suitable for low-level instrumentation amplifier applications, particularly when source impedance is high. Analog Devices specifically identifies the ICL7650 family for low-level signal processing, with low input offset voltage, low input bias current, wide bandwidth, and low drift. A practical design should still account for common-mode range, output swing, chopping-frequency behavior, and sensor-specific protection requirements.
ICL7650CPA+ vs ICL7650CPA+ replacement for a picoampere sensor?
The ICL7650CPA+ is appropriate for a picoampere sensor when its approximately 1.5 pA input bias current is compatible with the sensor's leakage and accuracy limits. When replacing it, select the replacement from the documented 8-pin DIP drop-in list and compare bias current, supply range, offset drift, bandwidth, common-mode range, and output swing. Keep sensor inputs guarded and use short, clean PCB traces to prevent leakage from dominating the measurement.
Is the ICL7650CPA+ in stock, and what is its lead time?
Current stock and lead time for ICL7650CPA+ should be confirmed through the Request a Quote form on this page because inventory changes by package, date code, and order quantity. The manufacturer product page and distributor listings identify the device as an 8-pin DIP chopper-stabilized amplifier, but they do not establish a universal lead-time commitment. Include the required quantity, date-code preference, and target delivery date in the request.
Where can I buy ICL7650CPA+ at an engineering-sourcing quantity?
Use the Request a Quote form on this page to request ICL7650CPA+ pricing, stock, quantity breaks, and lead time for your project. The quote workflow avoids stale pricing and lets the order be reviewed for the exact ICL7650CPA+ suffix, 8-pin plastic DIP package, operating-temperature grade, and date-code requirement. Include the schematic quantity and target schedule so the sourcing response can be evaluated accurately.
How much does the ICL7650CPA+ cost?
The current unit price for ICL7650CPA+ is obtained through the Request a Quote form on this page. Pricing depends on order quantity, package, date code, market availability, and manufacturing status, so a static figure can become inaccurate. Submit the required quantity and sourcing details to receive a current quotation for the exact 8-pin DIP ordering suffix.
Does the ICL7650CPA+ meet RoHS and REACH requirements?
The ICL7650CPA+ compliance position must be confirmed from the current Analog Devices product documentation or declaration for the exact ordering suffix. The manufacturer product page identifies the device and its low-level signal-processing features, while the published excerpts do not state its RoHS, REACH, lead-free, or halogen-free status. Request the current material compliance declaration before using the component in a regulated production program.

엔지니어링 참조 데이터: ICL7650CPA+ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ICL7650CPA+ when the application requires very low input bias current, low offset drift, and usable bandwidth in a single 8-pin DIP package. Its approximately 1.5 pA bias current is particularly valuable with high-impedance sensors, while the 2 MHz bandwidth can accommodate measurement transients that a DC-only precision amplifier would suppress. The ICL7650CPA is the closest documented alternative and uses the same 8-pin DIP architecture, making it useful for footprint-constrained redesigns. Before substituting it, confirm operating-temperature grade, lead-finish status, and exact ordering terms. If the circuit cannot tolerate chopping-frequency artifacts, lacks a suitable post-amplification filter, or needs a wider common-mode or output-voltage range, choose a different precision-amplifier architecture instead. For new designs, verify the 4.5 V to 16 V supply range, output swing, loop stability, and sensor-source impedance against the complete measurement chain.

대체품과의 비교

파라미터 이 제품 ICL7650CPA
Brand Analog Devices Analog Devices
Package 8-PDIP (7.62 mm row spacing) 8-PDIP (7.62 mm row spacing)
Amplifier Type Chopper-stabilized zero-drift operational amplifier Chopper-stabilized zero-drift operational amplifier
Number of Circuits 1 circuit 1 circuit
Input Bias Current 1.5 pA 1.5 pA
Open-Loop Gain 130 dB 130 dB
Gain-Bandwidth Product 2 MHz 2 MHz
Supply Voltage Range 4.5 V to 16 V 4.5 V to 16 V
Bipolar Supply Capability ±2.25 V to ±8 V ±2.25 V to ±8 V

주요 차별점

  • Exceptionally low input bias current for a wide-band zero-drift amplifier (vs ICL7650CPA)
  • Chopper stabilization supports low drift in static measurements (vs ICL7650CPA)
  • Wide bandwidth within a precision chopper-stabilized amplifier (vs ICL7650CPA)

설계 노트

Keep the ICL7650CPA+ input traces short and isolate them from switching nodes and high-impedance leakage paths. Use a grounded guard surrounding sensitive inputs where the sensor operates at picoampere-level currents. Avoid long exposed nodes and connectors where condensation, flux residue, or surface contamination can create parallel leakage paths.

Place the supply bypass capacitors directly beside the power pins and return their ground ends through the shortest practical path. Decoupling requirements should be confirmed against the manufacturer data sheet and application circuits. Maintain a stable supply across the full 4.5 V to 16 V operating range, and account for supply ripple and switching-converter noise when the input signal is very small.

Chopper-stabilized amplifiers can produce artifacts around their chopping frequency, so do not treat the approximately 2 MHz bandwidth as a flat signal path across every operating mode. Evaluate the complete amplifier, gain network, filter, and following converter together. Include sufficient loop-gain phase margin and place any post-amplification filtering where it removes chopper-related components without sacrificing the intended measurement bandwidth.

Do not select the ICL7650CPA+ solely from the 1.5 pA bias-current figure. First verify common-mode input range, output swing, stability with the selected load, gain limits, and the system noise bandwidth. Also verify the exact ordering suffix, operating-temperature grade, and 8-pin DIP footprint before committing the component to a production PCB.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page and device listings do not state the RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for the exact ordering suffix. The device is an operational amplifier and is not an automotive-qualified product unless the ordering suffix is explicitly documented as such.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ICL7650CPA+ datasheet ICL7650CPA+ pinout ICL7650CPA+ datasheet pdf ICL7650CPA+ equivalent ICL7650CPA+ replacement ICL7650CPA+ drop-in replacement ICL7650CPA+ price ICL7650CPA+ stock Analog Devices ICL7650CPA+ ICL7650CPA+ 1.5pA 2MHz ICL7650CPA+ 8-PDIP ICL7650CPA+ sensor amplifier ICL7650CPA+ vs ICL7650CPA ICL7650CPA+ footprint

관련 부품 & 용어

Analog Devices Maxim Integrated ICL7650CPA+ ICL7650CPA ICL7650 ICL7653 operational amplifier zero-drift amplifier chopper-stabilized amplifier instrumentation amplifier analog amplifier signal-conditioning IC integrated circuit input bias current input offset voltage offset drift open-loop gain gain-bandwidth product 8-pin plastic DIP PDIP through-hole package high-impedance sensor electrochemical measurement strain-gauge bridge precision instrumentation single supply dual supply
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기