Analog Devices

ICL7652CPA+ Zero-Drift Amplifier | Analog Devices

부품 번호: ICL7652CPA+ ✓ 활성
8-pin PDIP Package
MOQ: 1 |

ICL7652CPA+ 개요

The Analog Devices ICL7652CPA+ is a single-circuit chopper-stabilized operational amplifier in an 8-pin PDIP package. It is designed for precision signal-chain applications that require very low dc offset and drift. The device combines a chopper-stabilized input stage with a continuous-time operational-amplifier output stage, allowing it to reject offset voltage without the periodic ripple normally associated with auto-zeroing amplifiers. The ICL7652CPA+ designation identifies the lead-free ordering variant of the ICL7652 family.

A zero-drift operational amplifier is a precision amplifier whose input offset voltage changes very slowly with temperature and time. This characteristic differentiates it from conventional bipolar or CMOS amplifier families whose offset errors may vary appreciably over long measurement intervals. Zero-drift amplifiers belong to the broader operational-amplifier hierarchy, which sits within analog signal conditioning, instrumentation, sensor interfaces, and closed-loop control systems. They are especially useful when the useful sensor signal is smaller than the amplifier's unwanted dc error.

The principal feature of the ICL7652CPA+ is its chopper stabilization, which is intended to reduce input offset voltage and offset drift. The 8-pin PDIP construction supports conventional through-hole PCB assembly and prototyping. Only one amplifier circuit is present in each package, so a design requiring differential amplification, dual independent channels, or more than one gain stage must add another amplifier. The manufacturer datasheet describes the circuit as a chopper-stabilized operational amplifier, while distributor product records identify it as a one-circuit, zero-drift amplifier.

In a typical instrumentation circuit, the amplifier converts a small differential sensor voltage into a signal large enough for an ADC or measurement instrument. Its low-offset behavior helps preserve the integrity of that signal during long measurement cycles. The important engineering trade-off is that chopper-stabilized amplifiers normally require careful input filtering around the chopping frequency so that residual switching-related artifacts do not appear in sensitive measurements.

Typical uses include low-level current sensing with shunt resistors, bridge-sensor signal conditioning, precision pressure and strain-gauge amplification, low-frequency instrumentation, and battery-powered measurement equipment. Stable behavior over time is especially valuable in weighing systems, laboratory instrumentation, biomedical monitoring, and industrial sensors where temperature changes can otherwise create measurement drift.

PCB layout should keep the input network compact and isolate sensitive input traces from clocks, switching regulators, and high-current return paths. Input capacitance and chopping-frequency filtering must be calculated from the required signal bandwidth rather than selected solely by generic rules. The manufacturer datasheet should be used to select the external stabilization capacitor, verify compatible output load, and confirm operating limits before production release.

This product page organizes the package, circuit configuration, drop-in replacement information, sourcing questions, and application guidance into one engineering reference. It also highlights the distinction between electrical equivalence and true mechanical interchangeability, helping engineers evaluate PCB reuse, offset performance, chopping noise, and assembly requirements before approving a substitution.

드롭인 대체품: ICL7652CPA+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ICL7652CPA

✅ 드롭인
📦 8-pin PDIP
Same one-circuit zero-drift architecture and 8-pin PDIP package; the ordering code lacks the lead-free plus suffix, with no verified electrical difference established

📋 참조 대체품 (카탈로그에 없음)

TC913BCPA

✅ 드롭인
📦 8-pin PDIP
Same 8-pin PDIP format; dc offset, drift, bandwidth, supply range, and stabilization requirements require comparison against the ICL7652CPA+ manufacturer datasheets

📋 참조 대체품 (카탈로그에 없음)

ICL7652CPA+ 최대 정격 & 전기적 특성

Amplifier Type Chopper-stabilized zero-drift operational amplifier
Number of Circuits 1 circuit
패키지 8-pin PDIP
실장 유형 Through-hole
Lead-Free Ordering Variant ICL7652CPA+

ICL7652CPA+ 8-pin pdip 핀 구성 가이드

ICL7652CPA+(8-pin pdip 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ICL7652CPA+의 8-pin pdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ICL7652CPA+.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ICL7652CPA+ 적합 용도: 6 애플리케이션s: Precision Bridge-Sensor Signal Conditioning, Shunt-Based Current Measurement, Strain and Pressure Gauge Instrumentation, Battery-Powered Field Instrumentation, Medical Monitoring Front End, Low-Frequency Laboratory Measurement Equipment.

🏭

Precision Bridge-Sensor Signal Conditioning

The ICL7652CPA+ fits low-level bridge measurements because its chopper-stabilized, zero-drift architecture is intended to suppress input offset voltage and temperature-related drift. Place the amplifier in a differential gain stage so the bridge excitation produces a small millivolt-level differential signal while common-mode voltage and excitation error are rejected. The 8-pin PDIP package is convenient for instrument prototypes and through-hole measurement boards. The main qualification is bandwidth: the selected gain, sensor capacitance, and required measurement rate must remain compatible with the amplifier's documented small-signal and large-signal behavior.

⚡

Shunt-Based Current Measurement

The ICL7652CPA+ can amplify the voltage generated across a precision shunt when the required measurement rate is modest. Its one-circuit zero-drift amplifier configuration helps preserve small differential signals without allowing input offset voltage to dominate the reading. A typical circuit places the shunt in the differential input path and uses the amplifier with gain set by resistors. Validate the shunt's common-mode voltage, amplifier input range, and output swing before layout release, and include filtering that does not compromise the intended measurement bandwidth.

🧩

Strain and Pressure Gauge Instrumentation

The ICL7652CPA+ is well suited to strain-gauge and pressure-sensor interfaces where slow changes in temperature should not be mistaken for mechanical loading. The chopper-stabilized amplifier provides a low-drift amplification stage for the small differential signal produced by a deformed resistive bridge. Its 8-pin PDIP package supports straightforward instrumentation prototyping and educational systems. In production equipment, the design must also account for excitation-source noise, sensor lead resistance, input protection, and the chopping-related content that appears above the intended signal bandwidth.

📱

Battery-Powered Field Instrumentation

The ICL7652CPA+ is appropriate for portable measurement equipment where long-term dc stability matters more than wide bandwidth. Chopper stabilization reduces the influence of input offset drift, while the through-hole PDIP package makes the amplifier practical in compact laboratory instruments and ruggedized sensor interfaces. The design should evaluate supply-current demand, available rail headroom, and common-mode range rather than assuming operation from a single battery cell. Add an input filter appropriate to the chopping spectrum and verify start-up behavior across the full battery discharge range.

💊

Medical Monitoring Front End

The ICL7652CPA+ can serve as the precision amplification element in low-level medical monitoring equipment when signal bandwidth, noise, safety, and qualification requirements are met. Chopper-stabilized operation helps minimize offset variation in signals derived from resistive sensors, allowing small physiological or biochemical signals to be resolved more reliably. The 8-pin PDIP construction is appropriate for prototype and instrumented test equipment rather than assuming it satisfies every implantable or compact wearable package constraint. Medical-system designers must separately verify electrical isolation, applicable quality procedures, and the complete signal-chain error budget.

🔧

Low-Frequency Laboratory Measurement Equipment

The ICL7652CPA+ fits laboratory instruments that perform slow, repeatable measurements and need an amplifier with low offset behavior. It can condition thermocouple, resistive, or buffered sensor outputs when the selected circuit operates within the documented supply and common-mode limits. The single amplifier in each 8-pin PDIP package makes it economical for dedicated single-channel instruments. For a multi-channel measurement system, consider channel-to-channel calibration, resistor matching, grounding strategy, and whether another amplifier with integrated offset trimming would reduce assembly effort.

What is the ICL7652CPA+?
The ICL7652CPA+ is a single-circuit chopper-stabilized, zero-drift operational amplifier packaged in an 8-pin PDIP. Analog Devices and Maxim distributor records describe it as a chopper, zero-drift amplifier intended for precision applications where low input offset and offset drift are important. The device is assembled in a through-hole package, making it suitable for conventional PCB layouts and prototype boards requiring a single precision amplifier channel.
What are the key specifications of ICL7652CPA+ that engineers should know?
The ICL7652CPA+ is a one-circuit, 8-pin PDIP chopper-stabilized zero-drift operational amplifier. Its defining features are the chopper-stabilized input architecture, single-amplifier configuration, through-hole PDIP package, and lead-free ordering designation. Exact offset voltage, drift, bandwidth, supply range, and current limits must be taken from the manufacturer datasheet for the specific operating conditions. These parameters determine whether the amplifier can meet a sensor-interface accuracy and speed target.
Where can I download the ICL7652CPA+ datasheet PDF?
The ICL7652CPA+ datasheet PDF is available through the Analog Devices technical-document area and through the linked manufacturer data-sheet page for the ICL7650/ICL7652 family. Use the manufacturer document for the pin description, electrical characteristics, external stabilization-capacitor requirements, input and output limits, and application circuit. The listing describes the ICL7652CPA+ as an 8-pin PDIP, one-circuit chopper-stabilized operational amplifier.
Where can I find the ICL7652CPA+ pinout?
The ICL7652CPA+ pin assignment is shown in the pin-description section of the Analog Devices ICL7650/ICL7652 manufacturer datasheet. The component uses an 8-pin PDIP package, but the individual pin numbers and signal names should not be transcribed from generic diagrams because offset-trim, compensation, input, output, and supply functions must be matched to the exact datasheet. Use that table when assigning PCB tracks and checking test points.
Is ICL7652CPA+ suitable for precision sensor measurement?
Yes, the ICL7652CPA+ is suitable for low-level precision measurement when the application bandwidth is compatible with a chopper-stabilized amplifier. Its zero-drift architecture is intended to reduce input offset and temperature-related drift, which is beneficial for bridge sensors, strain gauges, and precision current measurements. The signal path still requires suitable input filtering and consideration of chopping-related artifacts before the amplifier output is digitized.
What can replace the ICL7652CPA+?
The ICL7652CPA and TC913BCPA are the closest documented drop-in candidates identified for the ICL7652CPA+ because they use the compatible 8-pin PDIP format. The ICL7652CPA is the same manufacturer's lead-free distinction without the plus suffix, while the TC913BCPA is a cross-brand precision-amplifier candidate shown in an explicit comparison result. Final substitution still requires checking offset, drift, bandwidth, supply range, stabilization-capacitor requirements, and noise behavior against the manufacturer datasheets.
Is ICL7652CPA+ the same as ICL7652CPA?
The ICL7652CPA+ and ICL7652CPA denote closely related lead-free ordering configurations from Analog Devices, with the same 8-pin PDIP format and one-circuit zero-drift amplifier architecture. The plus suffix is an ordering suffix and does not identify a different circuit topology. When upgrading a legacy design, engineers should still verify the marked temperature grade, electrical limits, stabilization capacitor, and production ordering code in the manufacturer documentation.
ICL7652CPA+ vs TC913BCPA: which is better for a precision bridge sensor?
Choose the ICL7652CPA+ when its documented offset, drift, supply range, chopping behavior, and external-component requirements match the bridge-sensor circuit more closely than the TC913BCPA. The TC913BCPA is a documented cross-brand alternative in the same 8-pin PDIP format, but the comparison result alone does not establish equal dc accuracy, noise, bandwidth, or stabilization requirements. Compare the manufacturer datasheets at the actual temperature, signal bandwidth, and supply voltage before selecting.
What is the difference between ICL7652CPA+ and TC913BCPA?
The ICL7652CPA+ is a chopper-stabilized, one-circuit zero-drift amplifier in an 8-pin PDIP, while the TC913BCPA is a separate precision-amplifier offering identified in a direct comparison. The shared PDIP format supports board-level interchangeability only if the pin functions, supply limits, offset performance, external stabilization requirements, and frequency response also align. Verify those details in both manufacturer datasheets before treating the TC913BCPA as a production drop-in replacement.
When should I choose ICL7652CPA+ over ICL7652CPA?
Choose ICL7652CPA+ when the required ordering configuration calls for the plus-suffixed lead-free version, especially for new production releases that must avoid a non-lead-free assembly option. The two listings share the one-circuit, 8-pin PDIP chopper-zero-drift identity, so the functional distinction is primarily ordering and qualification rather than circuit type. Confirm the exact product label, temperature grade, markings, and approved bill of materials before releasing either part.
Is ICL7652CPA+ suitable for a 5 V instrumentation supply?
The ICL7652CPA+ can be suitable for a 5 V instrumentation supply only if the manufacturer datasheet permits the selected total supply voltage and the application also satisfies its common-mode input and output-swing limits. The 5 V operating point alone does not prove compatibility because a rail-to-rail input range cannot be assumed. Check minimum supply voltage, input common-mode range, output swing, load capability, and stabilization-component requirements at the actual signal amplitude.
Where to buy ICL7652CPA+ online?
Use the Request a Quote form on this page to request ICL7652CPA+ availability, lead time, and an order quote from XAIPART. The part is an Analog Devices one-circuit, 8-pin PDIP chopper-stabilized zero-drift operational amplifier, so the request should identify the exact ICL7652CPA+ ordering code and required package quantity. This avoids ambiguity with the closely related ICL7652CPA listing or other members of the amplifier family.
What is the price of ICL7652CPA+?
The current commercial price and quantity availability for ICL7652CPA+ should be requested through the Request a Quote form on this page. The structured offer is refreshed as sourcing conditions change, so a static price can become misleading. For engineering review, identify the required quantity, package format, target date, and whether any additional ICL7652 or TC913BCPA alternatives are acceptable before requesting a quotation.
What is the lead time for ICL7652CPA+?
The current ICL7652CPA+ lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. Lead time can vary with the exact Analog Devices ordering code, quantity, and inventory position. Include the target delivery date and planned order quantities in the request. For electronic manufacturing or distribution, request periodic-change notifications so procurement can react to supply updates.
Is ICL7652CPA+ in stock?
Current ICL7652CPA+ stock status should be confirmed through the Request a Quote form on this page because inventory changes independently of product-page content. The component is listed as a one-circuit, 8-pin PDIP chopper-stabilized zero-drift amplifier, but that technical identity does not establish current availability. Provide the required quantity and production schedule so XAIPART can return a current sourcing response and expected lead time.
What compliance and qualification information applies to ICL7652CPA+?
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from current manufacturer or lot documentation rather than inferred from the plus suffix. The ICL7652CPA+ ordering code indicates a lead-free variant, while industrial and automotive system requirements may require separate qualification records. Review the current manufacturer environmental-compliance declaration and the applicable quality documentation before releasing the part into regulated production.

엔지니어링 참조 데이터: ICL7652CPA+ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ICL7652CPA+ when a precision, low-level signal requires a single chopper-stabilized zero-drift amplifier and the new design can use an 8-pin PDIP package. It is particularly relevant to bridge sensors, shunt measurements, strain instrumentation, and slow laboratory signals where offset variation can limit accuracy. Select the ICL7652CPA when that exact same-manufacturer ordering code is required by an approved legacy BOM and the lead-free qualification status remains acceptable. Consider the TC913BCPA only after comparing its datasheet values for offset, drift, bandwidth, supply range, common-mode range, output swing, and external stabilization requirements against the ICL7652CPA+. Do not select any replacement solely from the package outline: a mechanically similar part can still alter noise, stability, startup, or system calibration. For designs needing two channels, integrated offset trim, smaller size, or higher bandwidth, evaluate a different amplifier family rather than assuming this one-channel device is the best fit.

대체품과의 비교

파라미터 이 제품 ICL7652CPA TC913BCPA
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices Microchip Technology

주요 차별점

  • Single-circuit zero-drift design in a through-hole package (vs TC913BCPA)
  • Closest same-manufacturer ordering option (vs ICL7652CPA)
  • Established package format for through-hole instrumentation (vs TC913BCPA)

설계 노트

Treat the chopper-stabilized input network as a sensitive analog path. Keep the differential input traces short, symmetric, and away from clocks, DC-DC converters, and relay wiring. Use the manufacturer datasheet's recommended stabilization capacitor and input-filter method, then verify the filter against the required measurement bandwidth. Avoid adding excessive capacitance at the input unless its effect on settling time, stability, and chopping-frequency attenuation has been checked.

Validate the complete power-supply plan before placing the circuit. Confirm minimum and maximum total supply voltage, input common-mode range, output swing, and load capability at the actual signal amplitude. A 5 V rail does not by itself establish compatibility because the sensor node may impose a different common-mode voltage. Include supply bypassing close to the pins and ensure the external resistor network does not create an output-current or ground-reference error.

Do not assume that an 8-pin PDIP replacement is electrically interchangeable merely because its outline matches. Compare pin functions, supply limits, offset voltage and drift, gain-bandwidth product, slew rate, output swing, common-mode range, and external stabilization requirements in the manufacturer datasheets. The ICL7652CPA shares the family ordering format, while TC913BCPA requires a more detailed cross-brand qualification before production use.

Use a low-noise analog ground strategy around the amplifier and return sensor currents directly to the appropriate reference point. Place input and feedback components near the relevant pins, maintain symmetry between differential inputs, and keep high-current output or supply-return paths from sharing narrow traces with sensitive input returns. If an offset trim or external stabilization node is required, reserve the documented test or adjustment components even if they are not populated in the production configuration.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The plus suffix identifies the lead-free ordering variant in the manufacturer naming convention. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ICL7652CPA+ datasheet ICL7652CPA+ pinout ICL7652CPA+ datasheet pdf ICL7652CPA+ equivalent ICL7652CPA+ replacement ICL7652CPA+ drop-in substitute ICL7652CPA+ vs TC913BCPA ICL7652CPA+ 8-PDIP amplifier Analog Devices ICL7652CPA+ ICL7652CPA+ zero drift amplifier ICL7652CPA+ precision sensor application ICL7652CPA+ price ICL7652CPA+ stock what can replace ICL7652CPA+

관련 부품 & 용어

Analog Devices Maxim Integrated ICL7652CPA+ ICL7652CPA TC913BCPA operational amplifier precision amplifier zero-drift amplifier chopper-stabilized amplifier chopper stabilization input offset voltage offset voltage drift signal conditioning bridge sensor strain gauge shunt current measurement 8-pin PDIP PDIP package family through-hole mounting surface mount analog signal chain instrumentation amplifier application battery-powered instrumentation laboratory measurement equipment
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기