INA106U - Gain 10 Differential Amplifier | Texas Instruments
부품 번호: INA106U ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
INA106U 개요
A differential amplifier is a circuit that amplifies the voltage difference between two input terminals while suppressing voltage common to both inputs. In the signal-chain hierarchy, differential amplification sits between sensors or front ends and higher-gain analog processing. The INA106 family is commonly used for bridge, current, and instrumentation-amplifier input stages where preserving small differential signals is more important than accepting large common-mode signals.
Key documented features include accurate gain of ±0.025% maximum, common-mode rejection of 86 dB minimum, and nonlinearity of 0.001% maximum. The laser-trimmed resistor network is intended to maintain accurate gain and common-mode rejection over temperature. The manufacturer describes applications including a gain-of-10 differential amplifier, a -10 amplifier, and a +11 amplifier configuration. The available INA106 family packages include 8-pin plastic DIP and SOIC options, while INA106U specifically denotes the SOIC ordering variant.
The internal architecture is important because the matched resistor network determines gain accuracy and common-mode behavior. Unlike a discrete implementation using an operational amplifier and four external resistors, the integrated approach reduces resistor-matching variability and simplifies the physical circuit. The device should be evaluated against its complete datasheet electrical limits, including supply voltage, input range, output swing, frequency response, and temperature limits.
Typical applications include precision bridge excitation and sensing, instrumentation front ends, current measurement, sensor signal conditioning, and rejection of common-mode noise in industrial control systems. The SOIC-8 package is suitable for conventional surface-mount assembly, but exposed thermal performance and output-drive limits still depend on the exact operating conditions.
For layout, keep input traces short and symmetric, provide a clean reference connection, and place input filtering close to the amplifier. Confirm common-mode and output-swing limits before selecting external gain resistors or adding downstream gain. The fixed internal gain also means changing the system gain generally requires a different amplifier rather than an external resistor adjustment.
This page combines the verified Texas Instruments product and datasheet information, distributor references, package guidance, and practical selection considerations. It is intended to help engineers identify whether the INA106U fixed-gain architecture matches the required accuracy, common-mode rejection, package, and supply conditions.
드롭인 대체품: INA106U — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
INA106U/2K5
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
INA106P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
INA106AIP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
INA106UA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
INA106AUA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
INA106U 최대 정격 & 전기적 특성
| Product Type | Precision fixed-gain differential amplifier |
| Nominal Gain | 10 V/V |
| Gain Accuracy | ±0.025% maximum |
| Common-Mode Rejection | 86 dB minimum |
| Nonlinearity | 0.001% maximum |
| Input Configuration | Differential input |
| Internal Resistors | On-chip metal-film resistors |
| Resistor Calibration | Laser trimmed |
| 패키지 | 8-pin SOIC |
| 실장 유형 | Surface mount |
| 핀 수 | 8 pins |
| Application | Gain-of-10 differential amplification |
INA106U 8-pin soic 핀 구성 가이드
INA106U(8-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: INA106U.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
INA106U 적합 용도: 6 애플리케이션s: Bridge Sensor Signal Conditioning, Industrial Current Measurement, Precision Instrumentation Front End, Common-Mode Noise Rejection, Sensor Signal Conditioning, Analog Measurement Systems.
Bridge Sensor Signal Conditioning
The INA106U fits bridge-sensor front ends because it combines a nominal gain of 10 with a specified common-mode rejection of 86 dB minimum. It can amplify the small differential voltage generated by a strain-gauge or resistive bridge while rejecting voltage shared by both bridge nodes. The laser-trimmed internal resistor network helps maintain gain accuracy of ±0.025% maximum, reducing the need for a discrete matched-resistor network. Use it only after checking the bridge excitation voltage, sensor output magnitude, common-mode range, and output swing against the complete manufacturer datasheet.
추천
Industrial Current Measurement
INA106U is useful when a current-shunt or other sensing element produces a small differential signal riding on a larger common-mode voltage. Its gain-of-10 behavior provides a convenient fixed scaling factor, while 86 dB minimum common-mode rejection helps preserve measurement integrity in electrically noisy industrial systems. The amplifier should be placed close to the shunt so that the differential signal is not degraded by unequal trace resistance or pickup. Confirm input common-mode limits, supply voltage, output range, and shunt power dissipation before deployment.
추천
Precision Instrumentation Front End
The INA106U is appropriate for instrumentation front ends that need a fixed gain of 10 and accurate rejection of common-mode interference. The integrated operational amplifier and laser-trimmed resistor network simplify implementation compared with a discrete differential stage and help maintain matching over temperature. This makes the device relevant to measurement systems where calibration should remain stable and the input signal is naturally differential. The final circuit must still account for sensor excitation, input filtering, grounding, output loading, and the amplifier’s specified supply and common-mode limits.
추천
Common-Mode Noise Rejection
When a sensor or transmission path introduces equal voltage on both input terminals, the INA106U is designed to amplify only the differential component. Its verified 86 dB minimum common-mode rejection supports this use, while the fixed gain of 10 keeps the signal-conditioning function compact. The benefit is strongest when trace layout is symmetrical and the source impedance is matched. Engineers should still verify the frequency range over which the rejection specification applies and avoid assuming that common-mode rejection applies equally to all input frequencies or overvoltage conditions.
추천
Sensor Signal Conditioning
INA106U provides a simple fixed-gain stage for sensors that output differential voltage but do not require a fully adjustable instrumentation amplifier. The ±0.025% maximum gain accuracy and 0.001% maximum nonlinearity are useful when preserving amplitude relationships matters, while the 8-pin SOIC package supports conventional surface-mount assembly. Place the amplifier near the sensor or bridge, route both inputs symmetrically, and establish filtering based on the sensor bandwidth. The device should not replace a higher-bandwidth amplifier when the signal path requires substantially faster settling or wider frequency response.
추천
Analog Measurement Systems
The INA106U can serve as the first active differential stage in a compact analog measurement system. Its fixed gain of 10 is useful when the system designer wants predictable scaling without external gain-setting resistors, and the trimmed internal network supports consistent differential behavior. This is advantageous for instrumentation modules, laboratory interfaces, and process-control inputs where the physical circuit must remain compact. Validate the complete signal chain from sensor output through conversion, including supply noise, grounding, settling time, input protection, and the exact INA106U package drawing.
추천
추천 제품 요약
엔지니어링 참조 데이터: INA106U — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | INA106U/2K5 | INA106P | INA106AIP | INA106UA | INA106AUA |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin plastic DIP | 8-pin plastic DIP | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
주요 차별점
- Integrated fixed gain and resistor matching (vs Discrete operational-amplifier differential circuit)
- Common-mode rejection for differential sensing (vs INA106P)
- Fixed gain of 10 (vs Adjustable discrete differential amplifier)
설계 노트
Keep the two differential input paths short, matched, and routed away from switching nodes and high-current return paths. Because INA106U is designed for accurate common-mode rejection, unequal trace resistance or asymmetric input filtering can unbalance the differential signal and degrade practical CMRR. Place optional input protection and filtering near the amplifier pins, and use a ground reference that follows the source return rather than cutting through sensitive signal paths.
Use the SOIC-8 footprint only after checking the exact INA106U package drawing and assembly orientation. Maintain adequate clearance from copper pours and thermal or power circuitry so that the differential inputs do not pick up unintended coupling. A compact placement near the sensor or bridge is generally preferable to routing a small differential signal across the board. Verify land pattern, pin numbering, and exposed or non-exposed package details against the current manufacturer datasheet before release.
Do not assume that the fixed gain of 10 permits arbitrary input signals. Before connecting a sensor, confirm the supply voltage, input common-mode range, differential input range, output swing, and frequency-dependent behavior in the manufacturer datasheet. Also avoid treating INA105U, a generic operational amplifier, or a different package as a drop-in replacement solely because it is described as a differential or instrumentation amplifier.
규정 준수 정보
The verified manufacturer and distributor results identify Texas Instruments and INA106U but do not provide specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Current manufacturer compliance documentation is required for a formal declaration.