IW612HN/A1IMP - Wi-Fi 6 + BT 5.4 + 802.15.4 Tri-Radio | NXP
부품 번호: IW612HN-A1IMP ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
IW612HN-A1IMP 개요
A tri-radio connectivity IC is a system-on-chip that combines multiple wireless protocols on a single silicon die, sharing a common host interface, RF front end, and power management. In the hierarchy of wireless connectivity solutions, it sits above single-protocol SoCs (Wi-Fi only, Bluetooth only) and below full multi-chip modules, consolidating RF, baseband, MAC, and memory to reduce board area and system BOM cost.
Key features include concurrent 802.11ax Wi-Fi 6 operation with 802.15.4 (Thread/Zigbee) coexistence, Bluetooth 5.4 LE support for the latest BLE audio and mesh standards, and dual-band 2.4/5 GHz coverage that relieves the congested 2.4 GHz spectrum. The single-chip integration yields substantially lower system cost, smaller footprint, and simplified RF certification compared with discrete multi-chip solutions.
Architecturally, the IW612 integrates the RF transceiver, baseband, MAC processors, on-chip memory, and peripheral interfaces for host connectivity. The enhanced integration minimizes external components while supporting simultaneous tri-radio operation, making it a core connectivity engine for Matter-ready smart home designs that require Wi-Fi, Thread, and BLE in one part.
Typical applications include smart home hubs and gateways, smart appliances and accessories, smart energy meters, and industrial automation nodes. The tri-radio combination directly matches the connectivity requirements of Matter, Thread border routers, and BLE provisioning use cases.
Design consideration: a 4-layer PCB with solid ground pour under the exposed pad and careful antenna matching following the NXP reference design is essential for RF performance and regulatory compliance.
This page synthesizes distributor availability data, drop-in alternative analysis, and practical tri-radio design notes not found in the manufacturer datasheet.
드롭인 대체품: IW612HN-A1IMP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: IW612HN-A1IMP (동일 폼 팩터 및 풋프린트) — 차이점: Bluetooth Version, Wi-Fi Standard.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
IW612HN/A1IK
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
IW612HN
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →IW612HN-A1IMP 사양
| Product Type | Tri-radio wireless connectivity SoC |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax), 1x1 |
| Bluetooth Version | Bluetooth 5.4 / Bluetooth LE |
| 802.15.4 Protocols | Thread, Zigbee |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Radio Configuration | 1x1 dual-band |
| 패키지 | 116-VFQFN Dual Rows, Exposed Pad |
| 핀 수 | 116 |
| 실장 유형 | Surface Mount |
| Applications | Smart home, smart appliances, smart energy, industrial automation, gateways |
| Device Type | RF Transceiver |
| Packing | Reel (per Future Electronics) |
IW612HN-A1IMP 116-vfqfn dual rows, exposed pad 핀 구성 가이드
IW612HN-A1IMP(116-vfqfn dual rows, exposed pad 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: IW612HN-A1IMP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
IW612HN-A1IMP 적합 용도: 6 애플리케이션s: Smart Home Hubs and Gateways, Thread Border Routers, Smart Appliances, Smart Energy Metering, Industrial Automation and Condition Monitoring, Smart Devices and Accessories.
Smart Home Hubs and Gateways
The IW612HN/A1IMP is purpose-built for smart home hubs and border-router gateways because it combines the three radios that Matter ecosystems demand: dual-band 1x1 Wi-Fi 6 (802.11ax) for high-throughput cloud backhaul, Bluetooth LE 5.4 for mobile provisioning and commissioning, and 802.15.4 for Thread mesh networking. Running all three from a single 116-VFQFN chip eliminates a second radio IC, reduces board area, and simplifies regulatory certification. Placed at the hub core with the host processor over its standard interface, it maintains Thread mesh duty while streaming over 2.4 or 5 GHz Wi-Fi; the main trade-off is managing shared RF scheduling during concurrent tri-radio traffic.
추천
Thread Border Routers
A Thread border router must bridge an 802.15.4 Thread mesh to an IP backbone, which is exactly the IW612HN/A1IMP's strength: its 802.15.4 radio runs Thread natively while the 1x1 dual-band Wi-Fi 6 radio provides the upstream link without external coexistence circuitry. Bluetooth LE 5.4 additionally supports commissioning new Thread devices per the Matter specification. Integrating all three radios on one die, per the NXP IW612 datasheet, cuts system cost and power versus a two-chip Wi-Fi-plus-802.15.4 solution. Designers should budget RF scheduling headroom, since concurrent 2.4 GHz Wi-Fi and 802.15.4 traffic share spectrum and the on-chip coexistence arbitrates between them.
추천
Smart Appliances
Connected appliances such as washers, refrigerators, and ovens need dependable cloud connectivity plus commissioning support, and the IW612HN/A1IMP delivers both from one chip: Wi-Fi 6 dual-band operation reaches the 5 GHz band to avoid congested 2.4 GHz home networks, while Bluetooth LE 5.4 enables app-based setup and local control. The 802.15.4 radio future-proofs the platform for Matter appliance profiles and home-area sensor integration. Its single-chip integration yields a substantially lower BOM and smaller PCB area inside space-constrained appliance control boards, and industrial-grade integration suits the vibration and temperature environment of laundry and kitchen products.
추천
Smart Energy Metering
Smart energy infrastructure requires long-lived mesh networking and periodic high-bandwidth data backhaul, a pairing the IW612HN/A1IMP handles with its 802.15.4 radio supporting Zigbee and Thread meshes across meters and in-home displays, and its dual-band Wi-Fi 6 for gateway-to-cloud links. Bluetooth LE 5.4 supports utility commissioning tools and consumer energy displays. According to NXP, smart energy is a target application for the IW612's integrated tri-radio architecture, which reduces component count in sealed meter enclosures where every square centimeter and milliwatt matters. Low system-level power from high integration supports battery-assisted meter designs.
추천
Industrial Automation and Condition Monitoring
On factory floors, the IW612HN/A1IMP serves industrial gateways and condition-monitoring nodes that must aggregate sensor data over 802.15.4 (Thread) meshes while publishing to plant networks via dual-band Wi-Fi 6, whose 5 GHz operation avoids the interference-heavy 2.4 GHz environment of industrial Wi-Fi and motors. Bluetooth LE 5.4 enables ruggedized handheld configurators and commissioning tablets to connect to nodes during installation. NXP explicitly targets industrial automation with the IW612, and the single-chip tri-radio integration reduces the number of RF certified components on each node, lowering both hardware cost and factory radio certification effort across deployed fleets.
추천
Smart Devices and Accessories
Smart accessories - door locks, thermostats, sensors, and voice accessories - benefit from the IW612HN/A1IMP's Bluetooth LE 5.4 for phone pairing, 802.15.4 for joining Thread/Zigbee home networks, and optional Wi-Fi 6 for direct cloud connectivity on devices with mains power. The 1x1 dual-band architecture with 5 GHz support is uncommon in accessory-class parts and prevents Wi-Fi congestion dropouts in dense smart homes. According to NXP, smart devices and accessories are a primary IW612 application; the high integration in the 116-VFQFN exposed-pad package lets designers fit tri-radio connectivity into compact accessory enclosures with a single antenna port design effort.
추천
추천 제품 요약
엔지니어링 참조 데이터: IW612HN-A1IMP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | IW612HN/A1IK | IW612HN |
|---|---|---|---|
| Package | 116-VFQFN Dual Rows, Exposed Pad | 116-VFQFN Dual Rows, Exposed Pad - same | 116-VFQFN Dual Rows, Exposed Pad - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) 1x1 dual-band | Wi-Fi 6 (802.11ax) 1x1 dual-band | Wi-Fi 6 (802.11ax) 1x1 dual-band |
| Bluetooth Version | Bluetooth 5.4 / LE | Bluetooth 5.4 / LE | Bluetooth 5.4 / LE |
| 802.15.4 Protocols | Thread, Zigbee | Thread, Zigbee | Thread, Zigbee |
| Frequency Bands | 2.4 GHz, 5 GHz | 2.4 GHz, 5 GHz | 2.4 GHz, 5 GHz |
주요 차별점
- Tri-radio single-chip integration (Wi-Fi 6 + BT 5.4 + 802.15.4) (vs IW612HN/A1IK)
- Dual-band 5 GHz Wi-Fi 6 in an IoT-class part (vs IW612HN)
- Native Thread and Zigbee on the 802.15.4 radio (vs IW612HN/A1IK)
설계 노트
The IW612HN/A1IMP is supplied in a 116-VFQFN dual-row package with an exposed pad that serves as the primary RF and thermal ground. Solder the exposed pad to a solid, unbroken ground pour with an array of via stitches to the internal ground plane; an unconnected pad is the most common cause of failed RF range and poor EMI results on tri-radio designs. Use a 4-layer stackup with the ground plane directly beneath the RF section and keep the crystal and matching network traces as short as possible per the NXP reference layout.
Because the device operates 2.4 GHz and 5 GHz radios concurrently, antenna placement and matching must follow the NXP IW612 reference design rather than generic rules of thumb. Reserve the recommended antenna keep-out and matching-network footprints (pi-network pads) on both antenna ports even if the initial design uses a fixed matching solution, so tuning iterations after chamber testing do not require a respin. Verify coexistence behavior in the lab with simultaneous Wi-Fi throughput and Thread traffic active.
Do not treat the ordering suffix as an electrical difference: IW612HN/A1IMP and IW612HN/A1IK are the same die and package, so qualification testing transfers between them. However, do not substitute other NXP wireless parts (for example the 88W8987 Wi-Fi 5/BT 5.2 family) without a PCB redesign - they use different packages and lack the 802.15.4 radio. Confirm firmware/host-driver support for the exact IW612 variant in your BSP before releasing production builds.
규정 준수 정보
Compliance status was not present in the verified web data; confirm RoHS/REACH certificates on nxp.com/part/IW612HN or via distributor compliance documents before procurement.