KSZ8001LIA3 - 10/100 Ethernet PHY | Microchip | 48-LQFP
부품 번호: KSZ8001LIA3 ✓ 활성KSZ8001LIA3 개요
An Ethernet physical-layer transceiver, or Ethernet PHY, converts digital frame data transmitted by a host controller into physical signals carried over twisted-pair or fiber media. In the system hierarchy, a PHY connects the MAC layer of an Ethernet controller to the physical network. The KSZ8001 family therefore occupies the boundary between digital Ethernet processing and analog signal transmission, while its MII, RMII, and SMII interfaces support different host-clock and data-path arrangements.
The KSZ8001LIA3 supports 10BASE-T and 100BASE-TX copper Ethernet as well as 100BASE-FX fiber operation. These three media capabilities make it useful in industrial controllers, network switches, embedded equipment, and optical network interfaces. MII provides a parallel data path for host controllers requiring greater I/O bandwidth, RMII reduces the number of parallel interface signals, and SMII supports a serial synchronous management-oriented interface. LinkMD cable diagnostics add a practical means of identifying cable faults in installed networks.
Operation from 1.8 V or 3.3 V allows the PHY to align with systems using either digital core voltage or conventional 3.3 V I/O. The integrated transceiver combines multiple physical-layer functions without requiring separate copper and fiber PHY devices. Its 48-LQFP package exposes the required media interfaces, control signals, clock connections, and power connections on a standardized 7 x 7 mm surface-mount footprint.
Typical applications include industrial Ethernet controllers, compact network switches, embedded communication modules, factory automation equipment, print servers, network interface cards, and optical-to-copper network equipment. The combination of copper and fiber support is particularly valuable when one board must interface with both legacy twisted-pair links and higher-distance fiber links. The MII, RMII, and SMII options also let designers match the PHY to the available pin count and host-controller architecture.
PCB design should provide a continuous ground reference beneath the transceiver, short high-frequency supply connections, controlled clock routing, and media-circuit isolation from sensitive logic. The manufacturer's application guidance should be followed for magnetics, termination, fiber transmitter and receiver implementation, and layout around the 48-LQFP device. Designers should also confirm the host interface mode and media-selection requirements in the manufacturer datasheet before finalizing the board.
This product page combines the manufacturer interface, media, supply, package, and diagnostic capabilities with practical PCB guidance, application analysis, and package-matched alternatives. It is intended to help engineers select the correct Ethernet PHY configuration and plan a layout that preserves signal integrity, diagnostic capability, and serviceability.
드롭인 대체품: KSZ8001LIA3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: KSZ8001LIA3 (동일 폼 팩터 및 풋프린트) — 차이점: Host Interface, Product Type, Package, Auto-Negotiation, Cable Diagnostics.
KSZ8001LI
✅ 드롭인가격 문의
데이터시트 보기 →KSZ8001L
✅ 드롭인가격 문의
데이터시트 보기 →KSZ8051MLL
✅ 드롭인가격 문의
데이터시트 보기 →KSZ8001LIA3 사양
| Product Type | Ethernet physical-layer transceiver (PHY) |
| Supported Copper Media | 10BASE-T and 100BASE-TX |
| Supported Fiber Media | 100BASE-FX |
| Host Interface | MII, RMII, and SMII |
| Supply Voltage Options | 1.8 V and 3.3 V |
| Cable Diagnostics | LinkMD |
| 패키지 | 48-LQFP (7 x 7 mm) |
| 실장 유형 | Surface mount |
| Packaging | Tape and reel |
| Datasheet Revision | 1.03 |
| Transceiver Type | Full-duplex transceiver |
| PHY Speed Support | 10 Mbps and 100 Mbps |
| Copper Standard Support | 10BASE-T/100BASE-TX |
| Fiber Standard Support | 100BASE-FX |
KSZ8001LIA3 48-lqfp (7 x 7 mm) 핀 구성 가이드
KSZ8001LIA3(48-lqfp (7 x 7 mm) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: KSZ8001LIA3.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
KSZ8001LIA3 적합 용도: 6 애플리케이션s: Industrial Ethernet Controllers, Compact Network Switches, Embedded Communication Modules, Fiber-to-Copper Network Equipment, Print Servers and Network Peripherals, Factory Automation Ethernet Interfaces.
Industrial Ethernet Controllers
The KSZ8001LIA3 fits industrial Ethernet controllers that need a single PHY for 10BASE-T and 100BASE-TX copper links while retaining access to 100BASE-FX for longer-distance fiber. Its 1.8 V and 3.3 V operating options support host systems with either core or I/O voltage conventions. MII, RMII, and SMII options let the controller interface be selected according to available pins and clocking architecture. LinkMD cable diagnostics also support installation and maintenance teams by helping identify faults in deployed copper links. Designers should preserve continuous ground-plane return paths, isolate clock routing, and follow the manufacturer layout guidance around the 48-LQFP device and its external magnetics.
추천
Compact Network Switches
The KSZ8001LIA3 is appropriate for compact Ethernet switching equipment requiring 10/100 copper ports and an option for 100BASE-FX uplinks. Its combination of MII, RMII, and SMII interfaces allows adaptation to different switch-controller architectures, while the 7 x 7 mm 48-LQFP package conserves board area. LinkMD diagnostics can improve operational visibility for connected copper cables without requiring a separate diagnostic PHY. In a switching design, the exact media mode, magnetics, termination, and clock topology must be selected from the manufacturer reference circuit. Layout should keep switching-node and clock traces away from media-side circuitry while maintaining uninterrupted ground and supply planes.
추천
Embedded Communication Modules
KSZ8001LIA3-based communication modules can provide both copper and fiber connectivity while accommodating space-constrained embedded systems. The 48-LQFP surface-mount package supports compact board layouts, and the available MII, RMII, and SMII interfaces allow integration with controllers having different I/O constraints. The 1.8 V and 3.3 V operating options can simplify alignment with mixed-voltage embedded platforms. Because the device also includes LinkMD diagnostics, the module can add cable-health functions valuable in remote installations. Engineers should select only the required host interface, confirm the fiber transceiver implementation for 100BASE-FX, and isolate Ethernet magnetics from sensitive embedded circuitry.
추천
Fiber-to-Copper Network Equipment
The KSZ8001LIA3 is well suited to network-interface equipment that must bridge legacy 10/100 copper links and 100BASE-FX optical connections. Supporting copper and fiber media in one PHY reduces the need for separate physical-layer devices when both media types are required. MII offers a parallel host path, RMII reduces host-side pin demand, and SMII supports a serial synchronous configuration. The implementation must include the correct fiber transmitter and receiver circuitry, optical signal conditioning, and magnetics for the copper side. Controlled clock routing and short supply connections are especially important because the transceiver combines digital host signals with sensitive analog media channels in the same 48-LQFP footprint.
추천
Print Servers and Network Peripherals
추천
Factory Automation Ethernet Interfaces
KSZ8001LIA3-based factory automation equipment can use 100BASE-TX for ordinary control networks and 100BASE-FX where electrical isolation or longer cable reach is required. The combined media support helps maintain a consistent Ethernet architecture across machines installed at different distances. MII, RMII, and SMII host options permit integration with controllers of different processing resources, while LinkMD assists with diagnosing field cabling. Because the operating temperature grade and qualification status must be confirmed for the exact ordering code, production designs should verify those limits before deployment. Layout work should preserve a solid ground reference, isolate media components, and follow the manufacturer copper and fiber reference circuits.
추천
추천 제품 요약
엔지니어링 참조 데이터: KSZ8001LIA3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | KSZ8001LI | KSZ8001L | KSZ8051MLL |
|---|---|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Family | KSZ8001 | KSZ8001 | KSZ8001 | KSZ8051 |
| Surface-Mount Form | 48-LQFP | 48-LQFP | 48-LQFP | 48-LQFP |
| Replacement Qualification | Exact target MPN | Requires ordering-table and pinout review | Requires ordering-table and pinout review | Requires register, media, and pinout review |
주요 차별점
- Single PHY supports copper and fiber media (vs KSZ8001LI)
- Three selectable host-interface options (vs KSZ8001L)
- Integrated LinkMD cable diagnostics (vs KSZ8051MLL)
설계 노트
Place the KSZ8001LIA3 on a continuous ground reference and route the 1.8 V and 3.3 V supplies through short, low-impedance paths with local decoupling. Keep Ethernet media components and copper magnetics away from clock traces, processor interfaces, and sensitive analog circuits. The 48-LQFP footprint should follow the manufacturer land pattern exactly, with thermal and copper-flood considerations coordinated so the ground plane remains continuous.
Choose the MII, RMII, or SMII configuration that matches the Ethernet controller and route only the selected interface. Maintain the required clock-to-data relationships defined in the manufacturer datasheet, avoid unnecessary stubs, and provide return paths beneath high-speed signals. Where both copper and fiber media are used, keep optical-driver and receiver routing isolated from the digital host interface to reduce coupling into sensitive receive paths.
Do not substitute KSZ8001LI, KSZ8001L, or KSZ8051MLL solely because the package names match. Verify the complete pin assignment, supported copper and fiber modes, host-interface configuration, strap requirements, register behavior, operating-temperature grade, and ordering suffix. Also check the required external magnetics and whether the selected media interface uses LinkMD diagnostics before approving a board-level replacement.
Use the manufacturer's Ethernet magnetics and reference-layout guidance to control emissions and maintain return impedance around the copper media interface. Avoid routing PHY supply and media signals beneath or parallel to sensitive digital buses. Confirm the termination, center-tap, and bias network required by the selected 10BASE-T, 100BASE-TX, or 100BASE-FX configuration; incorrect media termination can impair link performance and cable diagnostics.
규정 준수 정보
A comparison result mentions RoHS and REACH information, but it does not state the compliance result for KSZ8001LIA3. The product is a network interface IC rather than an automotive-qualified device, so AEC-Q100 is recorded as not applicable.