LAN8710A-EZC-TR - 10/100 Ethernet PHY | Microchip
부품 번호: LAN8710A-EZC-TR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0.4544 | $0.45 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
LAN8710A-EZC-TR 개요
An Ethernet PHY is a physical-layer semiconductor that converts digital MAC data into electrical signals suitable for twisted-pair cabling, while receiving and converting incoming cable signals back into digital data. The LAN8710A family belongs to the network-interface hierarchy: Ethernet PHY, physical-layer transceiver, network interface IC, and interface semiconductor.
Key features include support for IEEE 802.3u MII and RMII connections, 10BASE-T and 100BASE-TX operation, auto-negotiation, HP Auto-MDIX, and Microchip flexPWR technology. The supplied manufacturer material identifies both extended-commercial and industrial temperature-range options, although the exact temperature range assigned to this orderable suffix is not explicitly stated in the provided snippets. The package is a 32-QFN surface-mount device.
The PHY is intended to work with an Ethernet MAC or a microcontroller containing an appropriate Ethernet MAC interface. MII and RMII provide different clocking and signal arrangements, so the host controller, board traces, and firmware must be matched to the selected interface mode. The verified manufacturer description confirms full-duplex operation and support for both 10 Mbps and 100 Mbps speeds.
Typical applications include industrial Ethernet equipment, consumer networking products, embedded systems, IoT gateways, and compact Ethernet-enabled embedded controllers. A design must provide correct decoupling, controlled clocking, a compatible magnetics network path, and PCB layout that follows the manufacturer recommendations. The verified data does not provide the complete pin mapping, electrical limits, or application-specific reference design, so those details should be checked in the manufacturer datasheet before layout release.
This page summarizes the verified manufacturer and distributor information while clearly separating confirmed features from electrical values that were not supplied. It is intended to help engineers identify the correct Ethernet PHY, package, interface type, and likely replacement family before consulting the complete datasheet.
드롭인 대체품: LAN8710A-EZC-TR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LAN8710A-EZC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LAN8710A-EZK
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LAN8710AI-EZC-TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LAN8710AI-EZK-TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LAN8710AI-EZK-TR-ABC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LAN8710A-EZC-TR 사양
| Ethernet Support | 10BASE-T and 100BASE-TX |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| Duplex Mode | Full-duplex |
| MAC Interface | MII and RMII |
| Interface Standard | IEEE 802.3u |
| Auto-Negotiation | Supported |
| Auto-MDIX | HP Auto-MDIX supported |
| Cable Support | Direct-connect or crossover LAN cables |
| Technology | Microchip flexPWR |
| Channel Count | 1 Ethernet transceiver |
| 패키지 | 32-QFN |
| Package Dimensions | 5 x 5 mm |
| 실장 유형 | Surface mount |
| Temperature-Range Options | Extended commercial and industrial options |
| Ethernet PHY Compliance | IEEE 802.3u MII/RMII support |
| RoHS | Compliant per verified alternative comparison data |
LAN8710A-EZC-TR 5 x 5 mm 핀 구성 가이드
LAN8710A-EZC-TR(5 x 5 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: LAN8710A-EZC-TR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LAN8710A-EZC-TR 적합 용도: 6 애플리케이션s: Embedded Industrial Ethernet, IoT Gateway Networking, Consumer Networking Equipment, Embedded Controller Ethernet Port, Networked Test and Measurement, Ethernet Bridge and Converter.
Embedded Industrial Ethernet
LAN8710A-EZC-TR fits embedded industrial equipment that needs a compact 10/100 Ethernet physical layer beside a microcontroller or dedicated MAC. Its confirmed 10BASE-T, 100BASE-TX, MII, and RMII support lets the design choose the host interface that matches the controller resources. The 32-QFN 5 x 5 mm package helps reduce board area, while auto-negotiation and HP Auto-MDIX simplify link setup. The design still needs industrial temperature, isolation, surge protection, and EMC validation because those requirements are not fully stated in the supplied snippets.
추천
IoT Gateway Networking
The LAN8710A-EZC-TR can provide the wired Ethernet physical layer in an IoT gateway that bridges local embedded control to a larger network. Supporting 10 Mbps and 100 Mbps allows the gateway to coexist with low-rate management traffic and higher-rate local links. MII or RMII provides integration flexibility with different MACs, while HP Auto-MDIX removes the need to rely on a specific cable type. Verify the required magnetics, termination, isolation, and firmware configuration before deploying the PHY in a networked product.
추천
Consumer Networking Equipment
LAN8710A-EZC-TR is suitable for compact consumer network products such as access points, gateways, bridges, and print servers. The 10/100 capability matches common legacy and fast-Ethernet infrastructure, while full-duplex operation and auto-negotiation reduce configuration complexity. Its small 32-QFN footprint supports denser consumer hardware than a large through-hole transceiver. The manufacturer describes the family for consumer, industrial, and enterprise applications, but the final product must still verify thermal, regulatory, and EMC requirements.
추천
Embedded Controller Ethernet Port
Use LAN8710A-EZC-TR as the Ethernet front end for a microcontroller or SoC that includes an MII or RMII-compatible MAC. The PHY handles the physical 10BASE-T and 100BASE-TX signaling, while the host controller manages frames, addressing, and protocol processing. Because MII and RMII have different signal and clock requirements, the host pin mapping, clock source, and firmware configuration must be aligned. The 32-QFN package supports compact embedded designs, and HP Auto-MDIX improves deployment flexibility.
추천
Networked Test and Measurement
The LAN8710A-EZC-TR can add a compact wired network connection to test instruments, laboratory controllers, and data-acquisition systems that use an embedded Ethernet MAC. The confirmed 10 Mbps and 100 Mbps modes support management traffic and instrument status communication, while MII/RMII flexibility permits integration with different host architectures. The 5 x 5 mm 32-QFN package helps preserve front-panel and board space. For precision or safety-critical equipment, verify grounding, isolation, EMC behavior, and regulatory requirements beyond the supplied source snippets.
추천
Ethernet Bridge and Converter
LAN8710A-EZC-TR is applicable to Ethernet bridges, protocol converters, and embedded communication adapters where a host processor needs a standard 10/100 physical layer. The device supports auto-negotiation, full-duplex operation, and HP Auto-MDIX, which helps the product work across common copper-cable environments. Its MII and RMII interfaces give designers a choice based on host pin availability and clocking architecture. Final designs must include the appropriate Ethernet transformer, line protection, controlled impedance routing, and validated magnetics selection.
추천
추천 제품 요약
엔지니어링 참조 데이터: LAN8710A-EZC-TR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LAN8710A-EZC | LAN8710A-EZK | LAN8710AI-EZC-TR | LAN8710AI-EZK-TR | LAN8710AI-EZK-TR-ABC |
|---|---|---|---|---|---|---|
| Package | 32-QFN | 32-QFN | 32-QFN | 32-QFN | 32-QFN | 32-QFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Standard | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX family function | 10BASE-T/100BASE-TX family function | 10BASE-T/100BASE-TX family function |
| Supported Speeds | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps family function | 10 Mbps and 100 Mbps family function | 10 Mbps and 100 Mbps family function |
| MAC Interface | MII and RMII | MII/RMII family function | MII/RMII family function | MII/RMII family function | MII/RMII family function | MII/RMII family function |
| Auto-MDIX | HP Auto-MDIX | LAN8710A family feature | LAN8710A family feature | LAN8710Ai family feature | LAN8710Ai family feature | LAN8710Ai family feature |
| Duplex Support | Full-duplex | Full-duplex | Full-duplex | Family function; exact value requires datasheet verification | Family function; exact value requires datasheet verification | Family function; exact value requires datasheet verification |
주요 차별점
- Confirmed MII and RMII interface support (vs LAN8710AI-EZC-TR)
- HP Auto-MDIX and automatic link negotiation (vs LAN8710A-EZK)
- Compact 32-QFN footprint (vs LAN8710AI-EZK-TR-ABC)
설계 노트
Route the MII or RMII signals according to the selected host interface and keep the PHY-side clock and data paths short. The verified material confirms both MII and RMII support but does not provide a complete pinout or timing table, so the manufacturer datasheet and layout guidance must control trace length, impedance, and return-path continuity. Avoid adding test-point stubs that create unnecessary signal-transition risk.
Implement the supply network with the decoupling and sequencing values specified in the LAN8710A/LAN8710Ai manufacturer datasheet. The supplied snippets identify flexPWR technology and low-power operation but do not provide the exact voltage range, capacitor values, or startup timing. Do not infer those values from the family name; verify them before schematic release and keep the PHY supply return path close to the device ground.
A same-family MPN is not automatically a drop-in replacement. Compare the exact 32-QFN land pattern, pin names, strap configuration, temperature grade, supply limits, interface mode, and Ethernet magnetics requirements for LAN8710A-EZC-TR and each candidate. In particular, MII and RMII clocking arrangements differ, so a board designed for one interface may require firmware and routing changes when substituting a related LAN8710Ai variant.
규정 준수 정보
The verified comparison source identifies RoHS compliance for the LAN8710A-EZC family. No verified REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was supplied. AEC-Q100 is not applicable to this Ethernet interface IC unless a separate automotive qualification is explicitly identified.
