Texas Instruments

LM324KAPW - Quad 2 kV ESD Op Amp | Texas Instruments

부품 번호: LM324KAPW ✓ 활성
Single positive supply Vdss 14-pin TSSOP Package
MOQ: 1 |

LM324KAPW 개요

Texas Instruments LM324KAPW is a quad general-purpose operational amplifier with 2 kV ESD protection, four amplifier channels, and a 14-pin TSSOP package. The device is intended for single-supply operation and is identified in manufacturer-related listings as a standard general-purpose amplifier.

An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare two input voltages and drive an output according to their difference. The quad LM324 combines four amplifiers in one package, reducing component count and simplifying layout in audio, sensor, filtering, and control circuits. As a general-purpose amplifier, it belongs to the operational-amplifier hierarchy within integrated circuits and analog signal processing.

The principal device-level features include four amplifier channels, a 14-pin TSSOP package, operation from a single positive supply, and 2 kV ESD protection. Searchable manufacturer product information identifies the LM324KAPW as a general-purpose amplifier, while comparison data lists a gain-bandwidth product of 1.2 MHz. The four-channel integration allows one package to support independent filtering, buffering, amplification, or feedback-control functions.

The LM324 architecture is suited to low-cost, low-frequency analog designs where moderate bandwidth and straightforward external compensation are sufficient. Its quad organization can reduce board area compared with four single-amplifier packages. Designers should still account for input common-mode range, output swing, supply headroom, input bias current, and stability when selecting external feedback components for a specific topology.

Typical applications include low-frequency audio signal conditioning, resistive sensor amplification, active filtering, DC error amplification, and general feedback control. The same package can also be used for multi-stage signal conditioning where four channels must operate independently. For instrumentation or precision measurement designs, verify the complete electrical limits and noise performance against the manufacturer datasheet before finalizing the gain and bandwidth budget.

PCB implementation should preserve short feedback paths, provide an unobstructed ground return, and decouple the supply close to the IC. The TSSOP-14 lead pitch also makes the device practical for compact, high-density analog assemblies. Avoid long signal traces between input and output nodes because parasitic capacitance can alter feedback behavior or cause instability in high-gain configurations.

This product record combines manufacturer-related product descriptions, package information, cross-reference findings, and practical engineering guidance. The comparison section distinguishes true pin-compatible options from alternatives that may require a footprint or pinout change, while the design notes emphasize supply bypassing, feedback layout, and stability checks that are important when replacing a quad amplifier in an existing design.

드롭인 대체품: LM324KAPW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM324KAPW (동일 폼 팩터 및 풋프린트) — 차이점: Package Type, Package, Supply Configuration, Amplifier Type, Architecture.

onsemi
Architecture: Quad voltage-feedback operational amplifier
비교 대상: LM324KAPW →
Texas Instruments
Package: 14-TSSOP
Supply Configuration: Single or dual supply
비교 대상: LM324KAPW →
Texas Instruments
Supply Configuration: Single or dual supply
비교 대상: LM324KAPW →
Texas Instruments
Package Type: 14-TSSOP
Supply Configuration: Single supply or split supply
Amplifier Type: General Purpose
비교 대상: LM324KAPW →
Texas Instruments
Package Type: 14-pin TSSOP
Supply Configuration: Single supply or split supply
비교 대상: LM324KAPW →

LM324PWRG4

✅ 드롭인
Texas Instruments
📦 TSSOP-14
Quad general-purpose operational amplifier · 4 independent channels · 1.2 MHz · 3 V to 32 V total · ±16 V · Single supply or split supply · Yes · High-gain, internally compensated

가격 문의

데이터시트 보기 →

LM324PWRG3

✅ 드롭인
Texas Instruments
📦 TSSOP-14
General Purpose · 4 circuits · 4 amplifiers · Four independent high-gain, frequency-compensated operational amplifiers · 1.2 MHz · 0.5 V/µs · 14-TSSOP · 0.173 in (4.40 mm)

가격 문의

데이터시트 보기 →

LM324APW

✅ 드롭인
📦 TSSOP-14
Same family, channel count, and 14-pin TSSOP footprint as LM324KAPW; exact grade and electrical-limit differences require manufacturer comparison

📋 참조 대체품 (카탈로그에 없음)

LM324KAPWRG4

✅ 드롭인
Texas Instruments
📦 TSSOP-14
Quad general-purpose operational amplifier · 4 circuits · 14-TSSOP · Surface mount · Single or dual supply · 26 V · 13 V per rail · 0.8 mA

가격 문의

데이터시트 보기 →

LM324KAPW 최대 정격 & 전기적 특성

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Number of Circuits 4 circuits
ESD Protection 2 kV
Gain-Bandwidth Product 1.2 MHz
패키지 14-pin TSSOP
Package Type TSSOP-14
실장 유형 Surface mount
Supply Type Single positive supply

LM324KAPW tssop-14 핀 구성 가이드

LM324KAPW(tssop-14 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

LM324KAPW의 tssop-14 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LM324KAPW.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LM324KAPW 적합 용도: 6 애플리케이션s: Low-Frequency Audio Signal Conditioning, Resistive Sensor Signal Amplification, Active Audio and Communication Filters, DC Control and Error Amplification, General-Purpose Buffering and Level Conditioning, Instrumentation and Measurement Front Ends.

🎧

Low-Frequency Audio Signal Conditioning

The LM324KAPW can implement low-frequency audio preamplification, buffering, and filtering because it integrates four general-purpose amplifier channels with a 1.2 MHz gain-bandwidth product. The quad arrangement allows several stages to be packaged without using four separate ICs. A typical circuit uses one channel for input amplification and another for an active low-pass filter. Verify output swing, common-mode range, and rail-to-rail behavior against the signal amplitude before deployment. Decouple the supply near the device and keep feedback loops short to reduce instability risk. This is a practical fit for line-level or low-frequency audio control circuits, not a high-bandwidth audio performance amplifier.

🧩

Resistive Sensor Signal Amplification

The LM324KAPW is appropriate for conditioning outputs from resistive sensors such as temperature, position, and bridge-based sensing elements. Its four channels can provide excitation buffering, instrumentation-stage amplification, offset conditioning, and output filtering within one package. The 1.2 MHz gain-bandwidth product is generally more than adequate for slow-moving sensor signals, while the principal limits are input bias current, offset voltage, common-mode range, and output swing. Select resistor values for the required sensitivity without making bandwidth unnecessarily high. A dedicated low-offset amplifier may be preferable when precision at low signal levels is more important than cost and integration.

🌐

Active Audio and Communication Filters

The four channels in LM324KAPW support multiple active-filter sections on one PCB, including low-pass, high-pass, band-pass, and notch stages operating at low frequencies. Its 1.2 MHz gain-bandwidth product provides useful margin above typical audio-band and low-frequency control-filter requirements. Four filters can be placed in one package, simplifying power routing and reducing footprint. Component tolerances and amplifier open-loop gain determine the actual filter response, so simulate the closed-loop network across its operating range. Keep the grounded reference and feedback components compact, and avoid routing inputs beside high-impedance output nodes. The device is well suited to general-purpose filtering when moderate bandwidth and low cost are priorities.

🏭

DC Control and Error Amplification

LM324KAPW can implement DC error amplifiers, comparator-like control loops, and closed-loop regulation stages when the required loop bandwidth is low. One channel may amplify the error voltage, while other channels provide signal conditioning or drive a control function. The single-positive-supply architecture supports compact control systems, but the output must remain inside the device’s allowable swing and common-mode limits. Avoid using the amplifier where a saturated output must switch rapidly, because its intended strength is linear amplification rather than high-speed comparator operation. Stable feedback layout, adequate supply bypassing, and careful grounding are essential. Check startup, overload recovery, and loop stability in the final converter or actuator-control circuit.

🔧

General-Purpose Buffering and Level Conditioning

The LM324KAPW can serve as a unity-gain buffer or impedance-matching stage between higher-impedance sensors and downstream analog circuitry. Four channels make it convenient to buffer several control, sensing, or reference-related nodes in one package. A voltage follower still requires adequate output-voltage headroom and must remain inside the input common-mode range, especially near the supply rails. Place input and output components close to their assigned pins, maintain a continuous ground reference, and avoid long high-impedance traces that increase noise pickup. For precision instrumentation, assess input bias current and offset against the source impedance. For low-cost general-purpose buffering, the quad integration can reduce both component count and PCB area.

🖥️

Instrumentation and Measurement Front Ends

LM324KAPW can provide the first stages of a general-purpose instrumentation front end when signal bandwidth and precision requirements are moderate. Four channels support differential amplification, reference buffering, gain adjustment, and anti-alias filtering. Its 1.2 MHz gain-bandwidth product accommodates slow measurement signals, but input offset and bias errors may become significant with very high source impedances or very small sensor outputs. Select the closed-loop gain carefully so noise gain remains compatible with amplifier stability. Place input resistors close to the amplifier, use a quiet ground return, and decouple the supply at the package. For precision measurement, compare the offset, bias-current, common-mode, and noise specifications with a dedicated instrumentation-amplifier architecture.

What is the LM324KAPW?
The LM324KAPW is a Texas Instruments quad general-purpose operational amplifier packaged in a 14-pin TSSOP. It integrates four independent amplifier channels and provides 2 kV ESD protection. The quad format is useful when a design needs several low-frequency analog stages in one package. According to the Texas Instruments product listing, it is classified as a standard general-purpose amplifier with a 1.2 MHz gain-bandwidth product.
How many operational amplifiers are in LM324KAPW?
The LM324KAPW contains four operational-amplifier channels in one 14-pin TSSOP package. Manufacturer-related listings identify it as a four-circuit device, while comparison information lists a 1.2 MHz gain-bandwidth product. Each channel can be used independently for buffering, filtering, gain, or feedback-control functions. Confirm the complete pin assignment in the LM324 datasheet before assigning PCB nets.
What package does LM324KAPW use?
The LM324KAPW uses a 14-pin TSSOP package intended for surface-mount PCB assembly. The package is identified directly in the Texas Instruments and DigiKey product listings. Its compact lead arrangement reduces board area when compared with four separate single-amplifier packages, although the narrow lead pitch can increase assembly and rework difficulty. Follow the manufacturer land pattern and pin-description table when laying out the footprint.
What are the key specifications of LM324KAPW that engineers should know?
The principal LM324KAPW specifications are four amplifier channels, 1.2 MHz gain-bandwidth product, 2 kV ESD protection, single-positive-supply operation, and a 14-pin TSSOP package. The device is positioned as a general-purpose amplifier for low-frequency analog signal conditioning. Exact supply-voltage limits, input offset voltage, bias current, slew rate, common-mode range, and thermal limits must be taken from the manufacturer datasheet before release to production.
Where can I download the LM324KAPW datasheet PDF?
The LM324KAPW datasheet PDF is available through the manufacturer’s official LM324 document link and through the indexed LM324KAPW datasheet result. The official datasheet is the preferred source for the pin description, electrical characteristics, recommended operating conditions, and application information. Use the manufacturer PDF for design sign-off because third-party datasheet mirrors may have different indexing or document revisions.
Where can I find the LM324KAPW pinout?
The LM324KAPW pinout is defined in the pin-description table of the Texas Instruments LM324 datasheet. The device uses a 14-pin TSSOP with four amplifier channels, supply pins, and ground pins. Use the datasheet’s numbered package drawing to assign each amplifier’s non-inverting input, inverting input, and output. Confirm orientation from the package marking and pin-1 indicator before fabrication.
Where can I buy LM324KAPW online?
The LM324KAPW can be requested through the “Request a Quote” form on this page for current commercial availability, minimum order quantity, and lead-time confirmation. The product is listed by Texas Instruments across multiple authorized-channel-style listings, but stock and delivery schedules can change independently for each order. Submit the exact MPN LM324KAPW with your required quantity and packaging preference when requesting a quotation.
What is the price of LM324KAPW?
Current pricing for LM324KAPW is generated through the “Request a Quote” form on this page because transactional pricing and quantity availability change over time. The structured listing record also contains a last-known unit-price reference, but the live quote should be used for purchasing decisions. Submit the exact 14-pin TSSOP MPN and required order quantity to obtain the current commercial response.
What is the lead time for LM324KAPW?
The current lead time for LM324KAPW should be confirmed through the “Request a Quote” form on this page. Lead time can depend on manufacturer inventory, order quantity, and the requested delivery schedule. Because the commercial database is quote-driven, no fixed shipment interval should be assumed. Include your required delivery date and target quantity in the quotation request for an actionable lead-time response.
Is LM324KAPW in stock?
LM324KAPW availability is best confirmed through the “Request a Quote” form on this page at the time of purchase. A product page may show a market listing without guaranteeing the same inventory position for your quantity and delivery terms. Request the exact MPN, desired quantity, and shipment destination so the current allocation can be checked against your production schedule.
What can replace LM324KAPW?
A direct replacement must use the same 14-pin TSSOP footprint and preserve the LM324 pin functions; LM324PWRG4 is identified by cross-reference information as a completely replaceable TSSOP-14 option. Some functional equivalents use a different package or pinout and therefore are not drop-in choices. Verify supply range, common-mode range, output swing, stability, and ESD requirements before approving any replacement.
Is LM324PWRG4 pin-compatible with LM324KAPW?
LM324PWRG4 is identified as a completely replaceable alternative for LM324KAPW, with consistent performance characteristics, terminals, and a 14-pin TSSOP package. This makes it the clearest drop-in option in the available cross-reference results. The manufacturer LM324 family should still be checked for parameter differences such as supply limits, temperature range, and grade markings before production substitution.
LM324KAPW vs LM324PWRG4 — which is better?
LM324PWRG4 is the stronger choice when the requirement is an easy replacement because it is explicitly described as a complete TSSOP-14 replacement for LM324KAPW. LM324KAPW remains appropriate when its exact ordering code, temperature grade, qualification status, or delivery conditions are specifically required. Compare the order codes and manufacturer datasheet limits before deciding whether the functional equivalence fully satisfies the application.
When should I choose LM324KAPW instead of another LM324 variant?
Choose LM324KAPW when the design specifically requires the exact Texas Instruments order code in a 14-pin TSSOP package and the broader LM324 electrical characteristics are adequate. Choose another compatible LM324 variant when a different temperature grade, qualification level, supply designation, or sourcing condition better matches the design. The deciding factor should be exact ordering-code requirements and verified electrical limits, not only generic pin compatibility.
Is LM324KAPW suitable for low-frequency sensor and filter applications?
Yes, LM324KAPW is suitable for many low-frequency sensor, buffer, and active-filter applications because it provides four general-purpose amplifier channels and a 1.2 MHz gain-bandwidth product. Suitability depends on signal amplitude, common-mode range, output swing, noise, and required closed-loop gain. Check the complete datasheet limits and verify stability with the intended feedback network and source impedance.

엔지니어링 참조 데이터: LM324KAPW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Select LM324KAPW when the design requires the exact Texas Instruments LM324KAPW order code, four general-purpose amplifier channels, a 14-pin TSSOP footprint, and the documented 2 kV ESD-protection feature. It is appropriate for low-frequency audio, filtering, sensor conditioning, buffering, and DC-control applications where a 1.2 MHz gain-bandwidth product is sufficient. LM324PWRG4 is the preferred reviewed drop-in candidate because cross-reference information explicitly describes it as completely replaceable with consistent terminals and package. LM324KAPWRG4 is another identified replacement, but its ordering suffix must be reviewed carefully. LM324PWRG3 and LM324APW belong to the same family and package family, yet exact temperature, qualification, and ordering details require manufacturer confirmation. Functional alternatives such as single or dual amplifiers should not be selected as direct replacements when the existing PCB requires all four channels in one TSSOP-14 footprint.

대체품과의 비교

파라미터 이 제품 LM324PWRG4 LM324PWRG3 LM324APW LM324KAPWRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14
Amplifier Configuration Quad operational amplifier Quad operational amplifier Quad operational amplifier Quad operational amplifier Quad operational amplifier
Number of Channels 4 4 4 4 4
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

주요 차별점

  • Exact LM324KAPW ordering code with integrated ESD protection (vs LM324PWRG4)
  • Four general-purpose channels in one compact package (vs LM324APW)
  • Same 14-pin TSSOP footprint as the confirmed drop-in option (vs LM324PWRG4)

설계 노트

Place the positive supply-decoupling capacitor close to the supply and ground pins, and provide a low-impedance ground path to the device. Because the TSSOP-14 lead pitch is narrow, route input and feedback nets with short copper paths and avoid passing them beneath or beside output traces. A solid ground plane is generally preferable to long point-to-point ground wiring, especially when four channels share the same package.

Do not assume that every LM324-family part is an unconditional drop-in replacement. Confirm the 14-pin TSSOP footprint, amplifier-channel pin arrangement, supply-voltage range, common-mode input range, output swing, temperature range, and qualification markings against the manufacturer datasheet. The LM324PWRG4 is explicitly identified as completely replaceable, while other family order codes can differ in grade or ordering terminology.

Keep each feedback network compact and place its resistors and capacitors directly across the relevant input and output pins. High closed-loop gain increases sensitivity to parasitic capacitance, and long traces can introduce oscillation or unexpected frequency response. Evaluate stability with the actual source impedance, load capacitance, supply decoupling, and external component tolerances rather than relying only on nominal bandwidth.

Check the amplifier’s input and output voltage against the supply rails before finalizing signal-gain limits. Output saturation can occur even when the closed-loop gain is mathematically correct, particularly in single-supply systems biased near ground. Confirm common-mode and output-swing limits from the manufacturer datasheet and include startup, overload, and supply-bypass conditions in the design review.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status was not stated in the product records. The automotive qualification field remains unknown because the exact LM324KAPW grade and qualification claims require confirmation from the manufacturer datasheet.

관련 검색

LM324KAPW datasheet LM324KAPW pinout LM324KAPW datasheet pdf LM324KAPW replacement LM324KAPW equivalent LM324KAPW vs LM324PWRG4 LM324KAPW TSSOP-14 footprint LM324KAPW 1.2 MHz LM324KAPW 2 kV ESD Texas Instruments LM324KAPW LM324KAPW price LM324KAPW stock LM324KAPW audio preamplifier LM324KAPW sensor amplifier

관련 부품 & 용어

Texas Instruments LM324KAPW LM324PWRG4 LM324PWRG3 LM324APW LM324KAPWRG4 LM324ANSR LM2902NSR quad operational amplifier general-purpose amplifier analog integrated circuit single-supply operation gain-bandwidth product ESD protection TSSOP-14 TSSOP package family surface mount active filter sensor signal conditioning audio preamplifier feedback control input common-mode range output swing supply decoupling signal integrity
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기