LM961 - Bluetooth 5.0 Dual Mode Module | LM Technologies
부품 번호: LM961 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.95 | $1,395.00 |
| 500 | $12.1 | $6,050.00 |
| 1,000 | $10.85 | $10,850.00 |
LM961 개요
A Bluetooth module is a self-contained subsystem that integrates the radio transceiver, baseband controller, host interface, and sometimes an on-board MCU plus an antenna matching network, exposing a simplified UART/SPI/USB control surface to the host processor. In the broader taxonomy, the LM961 sits within RF modules, which fall under RF & Wireless components, sitting alongside bare RF transceivers, RF amplifiers, and integrated SoCs. Dual mode specifically means the silicon can speak both Classic Bluetooth (BR/EDR) and Bluetooth Low Energy under the same Bluetooth 5.0 stack, which is critical for products that must interoperate with the installed base of classic-only peripherals while also taking advantage of BLE's low-power data channels.
Key features include 3 Mbps maximum data rate (BLE 5.0 PHY), embedded Bluetooth dual mode stack, 8 Mbit on-module flash for user application code, and configuration via AT commands in configuration mode. The module supports GAP central and peripheral roles and can establish Bluetooth Low Energy connections in addition to classic SPP/ACL streams. It is designed as a single-core standalone module, meaning the host MCU and the Bluetooth controller share processing on the same die, simplifying hardware design.
The architecture pairs an integrated MCU with the Bluetooth 5.0 dual mode core, freeing the application processor from running the Bluetooth stack. Power consumption is dominated by the radio duty cycle, so BLE connection intervals can be tuned for ultra-low average draw in battery-powered products. The 8 Mbit flash allows OEMs to embed application firmware and AT-command scripts directly on the module.
Typical applications include industrial IoT gateways, health and fitness wearables, M2M telemetry, point-of-sale terminals, and cable replacement for serial-port legacy equipment. The module is also well-suited for streaming high-quality sensor data over SPP or BLE to iOS and Android tablets.
When designing with this device, confirm that the antenna placement keeps the keep-out zone clear of ground pour and that the host PCB provides a clean 3.3 V rail, because TX current spikes directly modulate VCC and degrade RF performance. AT-command configuration requires the host UART to be set to the documented baud rate and flow-control mode.
This page synthesizes distributor pricing, drop-in module alternatives from the LM Technologies family, and practical RF design notes not found on the manufacturer datasheet cover page.
드롭인 대체품: LM961 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LM961-0650
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM961-0651
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LM961 사양 (제조사 공개)
| Product Type | Bluetooth 5.0 Dual Mode Module |
| Bluetooth Version | 5.0 (Dual Mode: BR/EDR + LE) |
| Bluetooth Backward Compatibility | v2.0, v2.1, v4.0, v4.1, v5.0 |
| GAP Roles Supported | Central (master), Peripheral (slave) |
| Maximum Data Rate | 3 Mbps (BLE 5.0 PHY) |
| On-module Flash Memory | 8 Mbit |
| Core Architecture | Single-core standalone (radio + MCU integrated) |
| Configuration Interface | AT commands over UART (configuration mode) |
| Supported Host Platforms | iOS, Android, embedded hosts with UART |
| Module Family | LM961 (LM Technologies) |
| Related Variant (v4.1 stack) | LM961-0650, LM961-0651 |
| Application Domain | Industrial IoT, M2M, cable replacement, wearables |
| RoHS 상태 | Compliant |
| Packaging (Tray) | 60 pcs per tray (LM961-0651) |
| Development Kit | LM550-0562 (LM55X family) |
LM961 인터페이스 및 커넥터
LM961은(는) 제조사에서 공개한 대로 다음 인터페이스와 커넥터를 제공합니다: 블루투스. 확장 헤더 핀아웃, 커넥터 핀 번호, 전기적 한계는 제조사 문서에 정의되어 있습니다.
| 블루투스 | 5.0 (Dual Mode: BR/EDR + LE) |
다음을 참조하십시오: 제조사 문서 전체 확장 헤더 핀아웃 및 커넥터 핀 번호는 다음을 참조하십시오.
일반적인 애플리케이션
LM961 적합 용도: 6 애플리케이션s: Industrial IoT Gateways, Cable Replacement for Serial Ports, Health and Fitness Wearables, Point-of-Sale Terminals, M2M Telemetry Modules, Smart Home and Consumer IoT Bridges.
Industrial IoT Gateways
The LM961 fits industrial IoT gateways that must aggregate data from a mix of legacy Bluetooth Classic sensors and modern BLE peripherals on a single wireless link. Its 3 Mbps BLE 5.0 PHY throughput streams high-rate vibration, temperature, or power-quality telemetry without compression, and the GAP central role lets the gateway poll up to seven simultaneous peripheral slaves. The on-module 8 Mbit flash holds gateway-side MAC addresses, scan tables, and AT-command scripts, removing the need for an additional EEPROM. Engineers pair the LM961 with a Linux host over UART and rely on the module's regulatory pre-certification to shorten FCC/CE lab cycles for the gateway enclosure.
추천
Cable Replacement for Serial Ports
The LM961's Bluetooth Classic SPP profile makes it a drop-in replacement for RS-232 cables between industrial equipment, lab instruments, and barcode scanners. With 3 Mbps BLE 5.0 throughput also available, designers can switch profiles without changing the host UART interface, and AT commands allow the same module to act as either the central or peripheral end of the link. The on-module 8 Mbit flash stores paired-device lists and link keys, so reconnects happen without host intervention. Compared to a bare BT transceiver IC, the LM961 removes the need to design a balun, antenna matching network, and shield-can RF section on the host PCB.
추천
Health and Fitness Wearables
The LM961 supports Bluetooth Low Energy connections at the 3 Mbps 2M PHY, which is well matched to streaming continuous heart-rate, SpO2, and motion-sensor data from a wrist wearable to a paired smartphone. The GAP peripheral role and the module's small standalone footprint let a wearable designer skip an external Bluetooth stack MCU, and the 8 Mbit on-module flash stores firmware updates and sensor-fusion coefficients. AT-command mode is convenient for production-line provisioning of serial numbers and BLE passkeys. Battery life benefits from BLE sleep modes between connection events.
추천
Point-of-Sale Terminals
Point-of-Sale (POS) terminals rely on the LM961's dual-mode capability to communicate with both legacy payment peripherals (Classic SPP printers, scanners) and modern BLE card readers or customer-facing devices. The 3 Mbps link and GAP central+peripheral flexibility allow one LM961 to act as the master hub while also exposing a peripheral channel for technician diagnostics. Its pre-certified RF section accelerates PCI-PTS lab testing where electromagnetic compatibility is tightly controlled. AT-command configuration suits OEM line-of-sight provisioning and firmware update workflows.
추천
M2M Telemetry Modules
Machine-to-machine (M2M) telemetry nodes use the LM961 to publish periodic sensor readings over BLE advertisement channels or maintain persistent SPP links to a local gateway. The 8 Mbit flash stores sensor calibration tables and AT-command power-profile settings that trade throughput for sleep current. The module's 3 Mbps capability lets M2M nodes batch large diagnostic dumps on demand rather than trickle them over a slower link. Industrial temperature range and surface-mount packaging suit enclosed, sealed telemetry enclosures.
추천
Smart Home and Consumer IoT Bridges
Smart-home bridges and consumer IoT hubs use the LM961 to bridge phones (typically iOS/Android BLE) with older Classic-Bluetooth appliances such as audio docks or smart bulbs. The module's GAP central role can simultaneously maintain a connection to a phone and scan for nearby Classic peripherals, simplifying hub-side state machines. The 8 Mbit on-module flash holds firmware-over-the-air staging buffers and pairing databases. AT commands let integrators script commissioning flows without writing a Bluetooth stack on the host MCU.
추천
추천 제품 요약
엔지니어링 참조 데이터: LM961 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LM961-0650 | LM961-0651 |
|---|---|---|---|
| Brand | LM Technologies | LM Technologies | LM Technologies |
| Package | Module (SMD, tray 60 pcs) | Module (SMD, tray 60 pcs) - same family | Module (SMD, tray 60 pcs) - same family |
| Bluetooth Version | 5.0 (Dual Mode) | 4.1 (Smart Ready Dual Mode) | 4.1 (Smart Ready Dual Mode) |
| GAP Roles | Central + Peripheral | Central + Peripheral | Central + Peripheral |
| Configuration Interface | AT commands over UART | AT commands over UART | AT commands over UART |
| Development Kit | LM550-0562 | LM550-0562 (shared family) | LM550-0562 (shared family) |
주요 차별점
- Bluetooth 5.0 dual mode with 3 Mbps PHY (vs LM961-0651)
- Same module footprint family across LM961-0650/-0651 (vs LM961-0650)
- On-module 8 Mbit flash for OEM firmware (vs LM961-0651)
설계 노트
Estimated: Place the LM961 module at the edge of the host PCB with the documented antenna keep-out zone completely free of ground pour, copper traces, and components within roughly 5 mm of the antenna. A 50 ohm controlled-impedance microstrip or coplanar waveguide feed should connect the module's RF pad to the host antenna or chip antenna, and the keep-out should be mirrored on inner layers.
Estimated: Provide a clean 3.3 V rail to the LM961 VCC pin with at least a 10 uF bulk capacitor plus a 0.1 uF decoupling capacitor placed within 3 mm of the module pad. Bluetooth TX current spikes can exceed 50 mA peaks during active transmissions; a noisy supply directly degrades RX sensitivity and link margin.
Estimated: Do not bypass the AT-command mode and write to the module's internal flash without first verifying the LM961 firmware variant and version via AT+VERSION or equivalent. Different LM961 firmware builds can change default baud rate, flow-control settings, and GAP role defaults, which causes 'dead-on-arrival' modules at production line programming.
규정 준수 정보
RoHS and REACH compliance stated on LM Technologies product page. AEC-Q100 not applicable for an RF module. Halogen-free and conflict-minerals status not explicitly stated in verified data.