LMP8350MA/NOPB - Ultra-Low Distortion ADC Driver | Texas Instruments
부품 번호: LMP8350MA/NOPB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.35 | $4.35 |
| 10 | $3.94 | $39.40 |
| 100 | $3.55 | $355.00 |
| 500 | $3.2 | $1,600.00 |
| 1,000 | $2.88 | $2,880.00 |
LMP8350MA/NOPB 개요
A fully-differential ADC driver is a special-purpose amplifier that converts a single-ended or differential input into a balanced differential output optimized for the differential input stage of precision ADCs. Within the signal-chain hierarchy (ADC driver -> amplifier -> analog front end -> signal chain), it provides output common-mode control, rejects even-order harmonics, and improves common-mode noise immunity ahead of the converter.
Key features include ultra-low distortion across a fully-differential signal path and three selectable operating modes controlled by a unique mode enable pin. As part of TI's PowerWise family, the high power mode is optimized for highest AC dynamic performance, while lower modes trade dynamic range for reduced power consumption - a flexibility few fixed-power differential drivers offer. The /NOPB suffix denotes a no-pull BOM with lead-free, RoHS-compliant plating suitable for global commercial and industrial builds.
Technically, the differential architecture inherently cancels common-mode noise and suppresses even-order distortion, which directly benefits THD and SNR when interfacing to precision SAR and delta-sigma converters. The three-mode design lets one footprint serve both battery-powered low-power data acquisition and high-AC-performance instrumentation, differentiating the LMP8350 from conventional fixed-bias fully-differential amplifiers.
Typical applications include high-speed precision data acquisition, industrial process control and PLC analog input modules, medical ultrasound front ends, communications receivers and software-defined radios, automated test equipment, and portable battery-powered instruments.
Design tip: realize the datasheet ultra-low-distortion performance only with a clean, symmetrical differential PCB layout, tight supply decoupling, and correct MODE pin configuration; verify pricing as of 2026-08-30 with current distributor stock at DigiKey and Mouser.
드롭인 대체품: LMP8350MA/NOPB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LMP8350MA/NOPB (동일 폼 팩터 및 풋프린트) — 차이점: Package / Case.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LMP8350MA/NOPB-Q1
✅ 드롭인✓ 재고 있음
$2.53 / 개
데이터시트 보기 →THS4521ID
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
OPA1632AID
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADA4932-1YRZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD8138ARZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LMP8350MA/NOPB 최대 정격 & 전기적 특성
| Type | ADC Driver IC (fully-differential amplifier) |
| Applications | Data Acquisition |
| Architecture | Fully-differential, PowerWise family with selectable power modes |
| Operating Modes | 3 (mode enable pin trades power for dynamic performance) |
| 패키지 / 케이스 | 8-SOIC (0.154 in, 3.90 mm width, D suffix) |
| 동작 온도 범위 | -40C to +85C |
| Packaging | Tube |
| Lead Free Status | Lead Free |
| RoHS 상태 | RoHS Compliant |
| Supplier Device Package | 8-SOIC |
| 실장 유형 | Surface Mount |
LMP8350MA/NOPB 핀 구성
| 핀 1 | +IN — Non-inverting input |
| 핀 2 | -IN — Inverting input |
| 핀 3 | VCM — Output common-mode voltage control |
| 핀 4 | -VS / GND — Negative supply or ground reference |
| 핀 5 | +VS — Positive power supply |
| 핀 6 | OUT+ — Non-inverting output |
| 핀 7 | OUT- — Inverting output |
| 핀 8 | MODE — Mode enable pin - selects one of three power/performance modes |
일반적인 애플리케이션
LMP8350MA/NOPB 적합 용도: 6 애플리케이션s: Precision Data Acquisition, Industrial PLC Analog Input Modules, Medical Ultrasound Front Ends, Communications Receivers and SDR, Automated Test Equipment, Portable Battery-Powered Instruments.
Precision Data Acquisition
The LMP8350 is purpose-built for data acquisition front ends, per DigiKey's classification (ADC Driver IC, Data Acquisition). Its fully-differential output with common-mode control matches the differential input of precision SAR and delta-sigma converters, suppressing even-order harmonics and common-mode noise before the ADC. In high power mode, ultra-low distortion preserves converter SNR and THD; in low power mode, the PowerWise mode enable pin cuts consumption for battery-operated loggers. Place the driver close to the ADC with tight decoupling to realize full dynamic performance.
추천
Industrial PLC Analog Input Modules
Industrial process control and PLC analog input modules benefit from the LMP8350's -40C to +85C rating and selectable power modes. The fully-differential signal path rejects common-mode noise from long field wiring, improving measurement integrity in electrically noisy factory environments. The mode enable pin lets one hardware design address both standard-performance I/O cards and low-power remote nodes. Its RoHS-compliant lead-free SOIC-8 package supports global industrial builds, and the automotive Q1 variant covers applications bridging factory and vehicle platforms.
추천
Medical Ultrasound Front Ends
Medical ultrasound receivers demand extremely low harmonic distortion because second- and third-order products degrade image quality and dynamic range. The LMP8350's ultra-low-distortion fully-differential architecture suppresses even-order harmonics by design, while high power mode delivers maximum AC performance for continuous-wave Doppler and beamforming channels. The mode enable pin allows power-conscious operation between transmit bursts, extending battery life in portable ultrasound systems while preserving dynamic performance during active acquisition windows.
추천
Communications Receivers and SDR
Software-defined radios and communications receivers require drivers whose distortion products fall below the converter noise floor. The LMP8350's ultra-low distortion specification keeps intermodulation out of the ADC passband, and its differential topology cancels common-mode LO feedthrough and supply noise. Selecting high power mode maximizes SFDR for wideband digitization; low power mode suits handheld radios between receive windows. The 8-SOIC footprint simplifies dense multi-channel receiver designs without exotic packages.
추천
Automated Test Equipment
ATE signal chains cannot tolerate driver distortion that would mask device-under-test errors, making the LMP8350's ultra-low-distortion fully-differential output valuable ahead of precision digitizers. Three power modes let instrumentation trade speed for thermal headroom in dense racks: high mode for maximum linearity during AC tests, lower modes for DC continuity scans. The -40C to +85C range covers unconditioned test-floor environments, and SOIC-8 mounting supports cost-effective high-channel-count boards.
추천
Portable Battery-Powered Instruments
The PowerWise mode enable pin is the LMP8350's key advantage in portable instruments: three operating modes trade power consumption for dynamic performance on demand. A handheld analyzer can run low power mode during idle monitoring, then switch to high power mode during a measurement sweep for full ultra-low-distortion performance. Combined with the compact 3.90 mm SOIC-8 package and modest quiescent consumption, one design spans benchtop-class linearity and field-portable battery life without changing components.
추천
추천 제품 요약
엔지니어링 참조 데이터: LMP8350MA/NOPB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LMP8350MA/NOPB-Q1 | THS4521ID | ADA4932-1YRZ | AD8138ARZ |
|---|---|---|---|---|---|
| Package | 8-SOIC (D, 3.90 mm) | 8-SOIC (D) - same | 8-SOIC (D) | 8-SOIC (D) | 8-SOIC (D) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Architecture | Fully-differential ADC driver | Fully-differential ADC driver | Fully-differential ADC driver | Fully-differential ADC driver | Fully-differential ADC driver |
| Selectable Power Modes | Yes - 3 modes via mode pin | Yes - 3 modes | No (fixed power) | No (fixed power) | No (fixed power) |
| Temperature Range | -40C to +85C | -40C to +125C (AEC-Q100) | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Qualification | No | Yes (AEC-Q100) | No | No | No |
| Pin Compatibility | Reference | Pin-to-pin identical | Verify pinout before swap | Verify pinout before swap | Verify pinout before swap |
| RoHS / Lead Free | Compliant / Yes | Compliant / Yes | Compliant / Yes | Compliant / Yes | Compliant / Yes |
주요 차별점
- Three selectable power modes via mode enable pin (vs THS4521ID)
- Automotive-qualified drop-in sibling (vs ADA4932-1YRZ)
- Ultra-low distortion focus for precision converters (vs AD8138ARZ)
설계 노트
Realize the LMP8350's ultra-low-distortion performance only with a symmetrical differential PCB layout. Keep the OUT+ and OUT- traces equal length, matched impedance, and routed over a continuous ground plane. Place the driver within millimeters of the ADC inputs. Per TI datasheet SNOSB03, symmetry errors reintroduce even-order harmonics that the differential topology is designed to cancel.
Configure the MODE enable pin deliberately: high power mode gives maximum AC performance while lower modes trade dynamic range for reduced current draw (PowerWise family feature). A floating or mis-driven MODE pin yields unpredictable performance. Add 0.1 uF ceramic decoupling directly at +VS and -VS/GND pins plus bulk capacitance at the board entry point.
Do not assume cross-brand SOIC-8 fully-differential amplifiers (THS4521, ADA4932, AD8138) are pin-to-pin identical - the mode enable pin on the LMP8350 is unique and has no equivalent on fixed-power parts. Also, the standard /NOPB is rated -40C to +85C only; use the LMP8350MA/NOPB-Q1 for automotive or extended-temperature designs.
규정 준수 정보
RoHS Compliant and Lead Free per DigiKey and Digchip listings. AEC-Q100 applies only to the separate LMP8350MA/NOPB-Q1 variant.
