LPC811M001JDH16FP - 30MHz Cortex-M0+ 8KB MCU | NXP
부품 번호: LPC811M001JDH16FP ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
LPC811M001JDH16FP 개요
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The LPC811 belongs to the hierarchy microcontroller, embedded processor, 32-bit microcontroller, Arm Cortex-M microcontroller, and low-power embedded controller. Its Cortex-M0+ core supports deterministic control tasks while reducing complexity and power demand compared with more capable processor cores.
Key verified features include 8 KB of flash organized as 8K by 8 bits, 4 KB of SRAM, 32-bit processing, and operation up to 30 MHz. The 16-TSSOP package limits board area and provides a conventional surface-mount footprint. NXP describes the LPC81x family as balancing timing, connectivity, and analog peripherals while offering a low pin count and a switch matrix that gives designers flexibility in pin mapping.
The LPC811 platform is suited to compact control systems where an efficient Arm Cortex-M0+ core and modest memory requirements are sufficient. Its 30 MHz operating point can support responsive control loops and peripheral coordination without requiring a higher-performance Cortex-M3 or Cortex-M4 implementation. Firmware and peripheral configuration should be validated against the complete manufacturer datasheet before production.
Typical uses include compact sensor controllers, low-cost condition-monitoring equipment, simple motor-control helpers, and small industrial interface modules. The low-pin-count package can simplify PCB design, while the switch matrix can reduce pin-routing constraints when sharing functions among GPIO and peripheral signals. Exact I/O ratings, analog ranges, and peripheral multiplexing must be checked for each board.
A key design consideration is preserving clean power, ground, and decoupling layout around a 3.3 V-class embedded controller. Place the required bypass capacitors close to their supply pins, maintain short high-speed routes, and validate unused pins according to the datasheet. Firmware developers should also confirm startup, clock, reset, and programming requirements before committing to the package.
This page combines verified manufacturer and distributor information with application guidance, procurement considerations, and design-focused explanations. It distinguishes the base LPC811M001JDH16 from the FP packaging suffix while preserving the verified 16-TSSOP, 30 MHz, 8 KB flash, and 4 KB SRAM identity of the target device.
드롭인 대체품: LPC811M001JDH16FP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LPC811M001FDH16FP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC811M001JDH16J
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC811M001JDH16
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC812M101JDH16J
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC824M201JDH20J
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC811M001JDH16FP 최대 정격 & 전기적 특성
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum Operating Frequency | 30 MHz |
| Flash Memory | 8 KB (8K x 8 bits) |
| SRAM | 4 KB |
| Word Size | 32-bit |
| 공급 전압 | 3.3 V |
| 패키지 | 16-TSSOP |
| 실장 유형 | Surface mount |
| 핀 수 | 16 pins |
| Package Width | 0.173 in (4.40 mm) |
| Product Series | LPC81xM |
| Core Architecture | Arm Cortex-M0+ |
| Product Classification | ARM microcontrollers - MCU |
| Peripheral Support | Timing, connectivity, and analog peripherals |
| Pin Routing | Switch-matrix flexible pin mapping |
| RoHS 상태 | unknown |
| REACH Status | unknown |
LPC811M001JDH16FP 0.173 in (4.40 mm) 핀 구성 가이드
LPC811M001JDH16FP(0.173 in (4.40 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LPC811M001JDH16FP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LPC811M001JDH16FP 적합 용도: 6 애플리케이션s: Compact Sensor Controller, Industrial Condition Monitoring, Simple Motor-Control Helper, Low-Cost Communication Interface, Compact Analog Monitoring Module, Small Consumer Utility Controller.
Compact Sensor Controller
The LPC811M001JDH16FP fits a compact sensor controller when the design needs a 32-bit Arm Cortex-M0+ core without a large memory footprint. Its 30 MHz operating frequency provides a responsive control baseline, while 8 KB flash and 4 KB SRAM can hold startup code, acquisition logic, calibration tables, and a small state machine. The 16-TSSOP package also helps reduce board area compared with larger microcontroller packages. The key design check is peripheral availability: the engineer should map the sensor interface, communication pins, and required analog functions against the verified datasheet before finalizing the PCB.
추천
Industrial Condition Monitoring
For small condition-monitoring modules, the LPC811M001JDH16FP can provide a low-cost embedded controller for sampling, threshold evaluation, event logging, and local status indication. The Arm Cortex-M0+ architecture is appropriate for deterministic supervisory tasks, and the 30 MHz headline frequency leaves room for peripheral servicing compared with a very slow 8-bit-class controller. Its 4 KB SRAM is adequate for short sample windows and control buffers, but it is not a substitute for a larger MCU when long histories or complex analytics are required. Industrial products should add appropriate input protection and validate EMC, grounding, and environmental requirements separately.
추천
Simple Motor-Control Helper
The LPC811M001JDH16FP can serve as a compact supervisory controller in a simple motor system where the main task is sequencing, limit monitoring, fault capture, and communication rather than intensive real-time computation. Its 32-bit Cortex-M0+ instruction set and 30 MHz operating capability are suitable for coordinated GPIO, timer, and communication tasks. The small 8 KB flash and 4 KB SRAM require disciplined firmware allocation, especially when logging diagnostics or supporting multiple control modes. Exact motor-driver pins, timer channels, and electrical limits must be verified from the manufacturer datasheet before connecting a power stage.
추천
Low-Cost Communication Interface
A small protocol interface is another practical use for the LPC811M001JDH16FP when the system needs a dedicated 32-bit control engine for framing, status tracking, and command handling. The LPC81x family's verified positioning around timing, connectivity, and analog peripherals makes the device relevant to compact interface products, while its 16-TSSOP package supports space-constrained boards. Memory sizing is the principal constraint: 8 KB flash and 4 KB SRAM should be checked against the protocol stack, buffering, bootloader, and diagnostics. Before release, verify peripheral multiplexing, pin assignment, clock requirements, and electrical limits against the exact LPC811M001JDH16 documentation.
추천
Compact Analog Monitoring Module
The LPC811M001JDH16FP can be evaluated for compact analog-monitoring modules where a microcontroller must coordinate sensor conditioning, threshold logic, and a digital output. The verified 30 MHz maximum frequency is useful for predictable sampling and peripheral timing, while the Arm Cortex-M0+ core provides a modern 32-bit software environment without requiring a large processor. The available 4 KB SRAM limits buffering depth, so applications should stream or export data rather than retain large histories. Analog accuracy, input range, sample rate, pin multiplexing, and reference behavior are not supplied in the verified web data and must be checked in the manufacturer datasheet.
추천
Small Consumer Utility Controller
The LPC811M001JDH16FP is a candidate for a small consumer utility controller when the product needs local control, a few interfaces, and compact firmware rather than high-end connectivity. Its 16-TSSOP package supports a relatively compact surface-mount layout, and the 30 MHz Cortex-M0+ platform can manage button or sensor inputs, state logic, and status outputs. The 8 KB flash and 4 KB SRAM should be treated as a hard design budget, especially when adding display updates, wireless features, or diagnostic logs. Production validation should cover power sequencing, unused-pin handling, programming, and all peripheral functions using the official NXP documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: LPC811M001JDH16FP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LPC811M001FDH16FP | LPC811M001JDH16J | LPC811M001JDH16 | LPC812M101JDH16J | LPC824M201JDH20J |
|---|---|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ family | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Frequency | 30 MHz | 30 MHz | 30 MHz | 30 MHz | 30 MHz | 30 MHz |
| Memory Class | Low-cost Cortex-M0+ MCU | Same-family candidate | Same-family 8 KB device | Base LPC811M001JDH16 | Higher-memory LPC812 device | Related LPC824 device |
| Pin Compatibility | 16-TSSOP target footprint | Package comparison reported; verify full pinout | Package comparison reported; verify full pinout | Base package listing; verify suffix details | Not confirmed by supplied data | Not confirmed by supplied data |
주요 차별점
- Compact 16-TSSOP Cortex-M0+ platform (vs LPC812M101JDH16J)
- Direct LPC811 family identity (vs LPC811M001FDH16FP)
- Low-cost 32-bit control positioning (vs LPC824M201JDH20J)
설계 노트
The verified target is a 3.3 V microcontroller in a 16-TSSOP package. Follow the manufacturer requirements for supply voltage tolerance, decoupling, reset, and power sequencing; those detailed limits are not present in the supplied web snippets. Place the required bypass capacitors close to the supply and ground pins, and route high-current return paths away from sensitive signal traces.
Use the 16-TSSOP footprint only after checking the official mechanical drawing and land pattern. Keep traces short between the MCU, decoupling capacitors, clock components, and external interfaces. Confirm pin multiplexing before assigning functions because the LPC81x switch matrix can change how peripheral signals map to package pins.
The target uses a low pin count, so each package pin may carry several possible peripheral functions. Create a firmware-to-pin matrix during schematic review and reserve pull resistors, test points, and programming access before layout is frozen. The verified snippets do not provide the full pinout, so do not infer pad assignments from package size alone.
Do not assume LPC811M001JDH16 and LPC811M001JDH16FP are electrically identical merely because distributor listings use closely related order codes. Check the NXP ordering table for temperature grade, tape-and-reel suffix, flash/SRAM configuration, and marking. Also verify that application firmware fits 8 KB flash and 4 KB SRAM, including boot code and library overhead.
규정 준수 정보
The verified web data identifies NXP's environmental-quality information as available but does not state a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals result. AEC-Q100 is not applicable to this general-purpose microcontroller category based on the supplied data.