LTC2361HTS8 - 250ksps 12-Bit SAR ADC | Analog Devices
부품 번호: LTC2361HTS8 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.86 | $4.86 |
| 10 | $4.32 | $43.20 |
| 100 | $3.78 | $378.00 |
| 500 | $3.29 | $1,645.00 |
| 1,000 | $2.85 | $2,850.00 |
LTC2361HTS8 개요
A SAR ADC is a type of data converter that uses a binary search algorithm and a capacitive DAC to digitize an analog input. SAR converters are valued for low latency (single-cycle conversion), deterministic behavior, and high dynamic performance at moderate sample rates. The LTC2361 belongs to the broader data converter (ADC) family, which sits within the signal chain hierarchy of analog mixed-signal ICs, ultimately serving precision measurement, industrial, and instrumentation systems.
Key features of the LTC2361HTS8 include 12-bit resolution with no missing codes, an SPI/MICROWIRE-compatible serial interface, automatic power-down between conversions to reduce average current, and a small TSOT-23-8 footprint that enables high-density PCB designs. The LTC2360/LTC2361/LTC2362 family shares the same die and pinout across 100/250/500 ksps, allowing the same layout to be reused for different speed grades. The device accepts a 0 V to VDD or 0 V to VREF full-scale input, which suits single-ended sensor interfaces.
The internal architecture combines a precision sample-and-hold front-end with a charge-redistribution SAR core, a high-bandwidth internal reference buffer, and on-chip conversion clock generation. The serial data output (SDO) and serial clock (SCK) use a simple three-wire interface that connects directly to microcontrollers, DSPs, and FPGAs, while the automatic nap mode between conversions reduces average power consumption at lower throughput rates.
Typical applications for the LTC2361HTS8 include portable instrumentation, data acquisition front-ends, battery monitoring, industrial process control loops, and isolated sensor signal conditioning. The wide supply range and low current draw also make it suitable for low-power remote monitoring and energy-harvesting systems.
When designing with the LTC2361HTS8, observe the input driving requirements in the manufacturer datasheet — the S/H front-end has specific acquisition-time and source-impedance constraints. A low-impedance buffer or op-amp driver is often required to reach the rated THD and SNR performance; a poor driver will noticeably degrade the converter's effective resolution.
This page synthesizes distributor pricing, drop-in alternatives drawn from the LTC2360/2361/2362 same-package family, and practical design notes not found in the manufacturer datasheet, providing a one-stop engineering reference for selecting the LTC2361HTS8.
드롭인 대체품: LTC2361HTS8 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LTC2361HTS8 (동일 폼 팩터 및 풋프린트) — 차이점: RoHS Status, Supply Voltage, Input Type, Resolution, Sample Rate.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LTC2360HTS8
✅ 드롭인✓ 재고 있음
$3.78 / 개
데이터시트 보기 →LTC2362HTS8
✅ 드롭인✓ 재고 있음
$4.12 / 개
데이터시트 보기 →LTC2312HTS8-12
✅ 드롭인✓ 재고 있음
$4.18 / 개
데이터시트 보기 →LTC2313HTS8-14
✅ 드롭인✓ 재고 있음
$4.1 / 개
데이터시트 보기 →LTC2314HTS8-14
✅ 드롭인✓ 재고 있음
$4.4 / 개
데이터시트 보기 →LTC2361HTS8 최대 정격 & 전기적 특성
| Manufacturer | Analog Devices Inc. (formerly Linear Technology) |
| MPN | LTC2361HTS8 |
| 기능 | 12-bit SAR Analog-to-Digital Converter (ADC) |
| Number of Channels | 1 |
| 분해능 | 12 bit |
| Sample Rate | 250 ksps |
| Input Type | Single-Ended, Unipolar (0 V to VDD or 0 V to VREF) |
| Supply Voltage (Analog/Digital) | 2.35 V to 3.6 V |
| Supply Current (typ) | 0.75 mA at 250 ksps |
| Reference | External VREF or internal VDD |
| Data Interface | SPI / MICROWIRE-compatible serial |
| 패키지 / 케이스 | TSOT-23-8 |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 C to +85 C (HTS8 industrial grade) |
| RoHS 상태 | Compliant (per #PBF / #TRPBF suffix ordering) |
| Lead-Free | Yes (PBF suffix indicates lead-free) |
LTC2361HTS8 핀 구성
| 핀 1 | CH1 / IN+ — Analog input channel 1 (single-ended positive input) |
| 핀 2 | VDD — Power supply, 2.35 V to 3.6 V |
| 핀 3 | GND — Ground reference |
| 핀 4 | VREF — Reference voltage input (0 V to VDD full-scale) |
| 핀 5 | SDO — Serial data output (SPI/MICROWIRE-compatible) |
| 핀 6 | SCK — Serial clock input |
| 핀 7 | CNV — Convert / Chip Select input (rising edge starts conversion) |
| 핀 8 | GND — Ground reference (or NC per variant marking) |
일반적인 애플리케이션
LTC2361HTS8 적합 용도: 6 애플리케이션s: Portable Data Acquisition Front-End, Battery Monitoring & Management, Industrial Process Control Loops, Medical & Patient Monitoring, Isolated Sensor Signal Conditioning, Energy Harvesting & Remote Sensing.
Portable Data Acquisition Front-End
The LTC2361HTS8 fits portable data-acquisition front-ends because of its 12-bit resolution, 250 ksps throughput, and 0.75 mA supply current. The 2.35-3.6 V single-supply range matches 3.3 V LDO rails, while the TSOT-23-8 footprint minimizes board area in handheld instruments. The SPI-compatible serial interface connects directly to low-power Cortex-M microcontrollers, and the automatic power-down between conversions reduces average current in battery-powered logging systems. The 0 V to VREF input range is well suited to sensor outputs conditioned by a low-noise op-amp buffer.
추천
Battery Monitoring & Management
The LTC2361HTS8 suits battery-monitoring applications because of its low supply current (0.75 mA) and wide 2.35-3.6 V supply range, which lets the ADC share the battery rail. Its 12-bit resolution and 0 V to VREF input range is well-matched to current-sense amplifier outputs from a hall-effect or shunt sensor, and the SAR architecture provides single-cycle conversion latency critical for cell-balancing loops. The 250 ksps sample rate easily captures fast transients during charge/discharge cycles while keeping average power low thanks to automatic nap mode.
추천
Industrial Process Control Loops
The LTC2361HTS8 fits industrial process-control loops because of its 12-bit resolution, ±1 LSB INL typical, and robust SAR architecture that delivers deterministic latency for PID control feedback. The 2.35-3.6 V supply range is compatible with industrial 3.3 V sensor interfaces, and the TSOT-23-8 small footprint enables high-density analog front-end designs. Its SPI interface easily bridges to PLC controllers or industrial microcontrollers, while the wide -40 to +85 C operating temperature range handles factory-floor environments.
추천
Medical & Patient Monitoring
The LTC2361HTS8 suits medical and patient-monitoring designs because of its 12-bit resolution and 0.75 mA supply draw, which enables battery-powered wearable devices. The SAR architecture provides single-shot, deterministic conversion ideal for capturing physiological events such as ECG or pulse oximetry waveforms. The compact TSOT-23-8 package and 2.35-3.6 V supply range match lithium-polymer battery rails, and the SPI interface connects to low-power microcontrollers commonly used in medical IoT devices.
추천
Isolated Sensor Signal Conditioning
The LTC2361HTS8 is a strong fit for isolated sensor signal conditioning because of its compact TSOT-23-8 footprint and 2.35-3.6 V supply range, which can be powered from an isolated DC/DC converter secondary. Its 12-bit resolution and 0 V to VREF input range are well-matched to amplified bridge-sensor or strain-gauge outputs on the isolated side, and the SPI interface is easily bridged across an isolation barrier using digital isolators. The 250 ksps throughput comfortably captures vibration and load-cell signals.
추천
Energy Harvesting & Remote Sensing
The LTC2361HTS8 fits energy-harvesting and remote-sensing nodes because of its 0.75 mA supply current, automatic power-down between conversions, and 2.35-3.6 V supply range that is compatible with small solar or thermoelectric harvesters. The SAR architecture provides single-cycle conversion with no pipeline delay, ideal for wake-and-measure duty cycles. Its TSOT-23-8 package and SPI interface enable compact wireless sensor nodes that pair naturally with low-power transceivers for IoT telemetry.
추천
추천 제품 요약
엔지니어링 참조 데이터: LTC2361HTS8 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LTC2360HTS8 | LTC2362HTS8 | LTC2312HTS8-12 | LTC2313HTS8-14 | LTC2314HTS8-14 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TSOT-23-8 | TSOT-23-8 (same) | TSOT-23-8 (same) | TSOT-23-8 (same) | TSOT-23-8 (same) | TSOT-23-8 (same) |
| Resolution | 12 bit | 12 bit (same) | 12 bit (same) | 12 bit (same) | 14 bit | 14 bit |
| Sample Rate | 250 ksps | 100 ksps | 500 ksps | 500 ksps | 500 ksps | 450 ksps |
| Supply Voltage | 2.35 V to 3.6 V | 2.35 V to 3.6 V (same) | 2.35 V to 3.6 V (same) | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Supply Current (typ) | 0.75 mA | 0.5 mA | 1.1 mA | 1.1 mA | 1.1 mA | 1.1 mA |
| Data Interface | SPI / MICROWIRE | SPI / MICROWIRE (same) | SPI / MICROWIRE (same) | SPI (same family) | SPI (same family) | SPI (same family) |
| Channels | 1 | 1 (same) | 1 (same) | 1 (same) | 1 (same) | 1 (same) |
주요 차별점
- Balanced throughput-versus-power in a single TSOT-23-8 package (vs LTC2360HTS8 / LTC2362HTS8)
- Lower sample rate than LTC2362HTS8 reduces current draw by ~32% (vs LTC2362HTS8)
- 12-bit resolution with same pinout as 14-bit LTC2313HTS8-14 (vs LTC2313HTS8-14)
설계 노트
The analog input source impedance directly impacts the SAR converter's acquisition time. With a 250 ksps sample rate and 1.5 MHz internal acquisition window, the source impedance should be kept below 200 ohm to settle within 1 LSB at 12 bits. A poor driver or excessive series resistance will show up as gain error, INL, and noise. Place the input buffer (e.g., AD8021 or LT1028) as close to the CH1 pin as possible, with a 1 nF to 10 nF external hold-capacitor-reset capacitor only if recommended in the datasheet.
Place a 0.1 uF ceramic decoupling capacitor within 1-2 mm of the VDD pin and a 10 uF bulk capacitor on the same node. The TSOT-23-8 has a center GND thermal pad and exposed lead frame; provide a continuous ground pour on the top layer under the package, stitched to the bottom-layer ground plane with multiple vias, to minimize digital-return-current noise coupling into the analog input. Keep digital lines (SCK, SDO, CNV) routed away from the CH1 input trace and VREF pin to avoid digital kickback glitches.
Although the LTC2361 only draws 0.75 mA in active conversion, the automatic power-down current drops to a few microamps between conversions. At lower effective sample rates (e.g., 1 ksps), the average current is dominated by the wake-and-convert cycle and can be far less than 0.75 mA. For battery-powered designs, a low-quiescent LDO such as the LT3010 or LT3009 on the analog supply and a separate digital-rail LDO on the microcontroller's IO supply help to minimize digital noise coupling into the analog front-end.
규정 준수 정보
RoHS compliance per #PBF / #TRPBF suffix ordering. Not AEC-Q100 qualified (industrial grade only).
