MAX1162ACUB+T - 16-Bit 200ksps +5V SAR ADC | Analog Devices
부품 번호: MAX1162ACUB+T ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.95 | $8.95 |
| 10 | $8.05 | $80.50 |
| 100 | $7.16 | $716.00 |
| 500 | $6.45 | $3,225.00 |
| 1,000 | $5.74 | $5,740.00 |
MAX1162ACUB+T 개요
A SAR ADC is a type of data converter that performs a binary search through an internal capacitive DAC to digitize an analog signal in N conversion cycles for N bits of resolution. As part of the broader data-acquisition signal chain (sensor -> front-end amplifier -> anti-alias filter -> ADC -> digital host), SAR ADCs are prized for deterministic latency, low latency-to-sample ratios, and excellent DC accuracy without the pipeline delay of pipelined architectures.
Key specifications include 16-bit no-missing-codes performance, an input-voltage range of 0 to VREF, an internal 4 MHz track-and-hold, an SPI/QSPI/MICROWIRE-compatible serial output. The MAX1162ACUB+T integrates the reference buffer internally, so only an external reference voltage (typically +5V for full-scale) is required. The automatic shutdown between conversions reduces average supply current dramatically at lower throughput rates, making the part ideal for battery-powered and duty-cycled applications.
Architecture-wise, the device uses a charge-redistribution capacitive DAC array combined with a precision comparator and successive-ration logic, with an internal input track-and-hold that accepts fast-slewing signals up to the conversion rate without external buffering. The serial interface is straightforward: CS, DOUT, and SCLK form a standard 3-wire SPI port compatible with most microcontrollers and DSPs.
Typical applications include portable data loggers, hand-held measurement instruments, battery-powered sensors and instrumentation, industrial process control analog front-ends, and medical monitoring devices. Its small 10-pin uMAX footprint suits space-constrained PCB designs where density matters.
When designing with this ADC, allocate adequate settling time for the external reference and add a 0.1 µF bypass capacitor close to VDD. The SSTRB (or DSP-style) output can be polled to confirm conversion completion before clocking out results. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.
드롭인 대체품: MAX1162ACUB+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX1162ACUB+T (동일 폼 팩터 및 풋프린트) — 차이점: Package, Resolution, Number of Channels, Architecture, Input Voltage Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MAX1162ACUB+
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX1162BCUB+
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX1162BEUB+T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX1162CEUB+T
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX1162AEUB+T
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.92 / 개
데이터시트 보기 →MAX1162ACUB+T 최대 정격 & 전기적 특성
| 분해능 | 16 bits |
| Architecture | Successive Approximation (SAR) |
| Number of Input Channels | 1 single-ended |
| 샘플링 속도 | 200 ksps |
| Conversion Time | 10 us (200 ksps) |
| Supply Voltage (VDD) | +5 V single supply |
| 입력 전압 범위 | 0 V to VREF |
| External Reference (VREF) | Up to +5.25 V (logic-level adjustable) |
| 셧다운 전류 | 10 uA |
| Wakeup Time | 1.1 us |
| Internal Track/Hold Bandwidth | 4 MHz |
| 인터페이스 | SPI / QSPI / MICROWIRE-compatible serial |
| 패키지 | 10-pin uMAX (TSSOP-equivalent, gull-wing) |
| 동작 온도 범위 | 0C to +70C (commercial) |
| No Missing Codes | 16 bits guaranteed |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
MAX1162ACUB+T 핀 구성
| 핀 1 | AIN — Analog input (0 to VREF) |
| 핀 2 | GND — Ground |
| 핀 3 | REF — External reference voltage input |
| 핀 4 | VDD — +5V power supply |
| 핀 5 | CS — Chip select (active-low) |
| 핀 6 | DOUT — Serial data output |
| 핀 7 | SCLK — Serial clock input |
| 핀 8 | SSTRB — Conversion status output |
| 핀 9 | NC — No connect (not connected per datasheet) |
| 핀 10 | GND — Ground |
일반적인 애플리케이션
MAX1162ACUB+T 적합 용도: 6 애플리케이션s: Portable Data Loggers, Industrial Process Control, Handheld Measurement Instruments, Medical Monitoring Devices, Battery-Powered Sensor Interfaces, Precision Weigh Scales.
Portable Data Loggers
The MAX1162ACUB+T's 10 uA shutdown current and 1.1 us wakeup time make it ideal for battery-powered data loggers that duty-cycle conversions to extend battery life. With 16-bit no-missing-codes accuracy and 200 ksps sampling, it captures sensor signals faithfully even in remote, unattended installations. The 10-pin uMAX footprint fits compact logger PCBs.
추천
Industrial Process Control
In industrial process control analog front-ends, the MAX1162ACUB+T's 0-to-VREF input range interfaces directly with 4-20 mA loops (via shunt) and 0-10V transducer signals. The 16-bit resolution provides the precision needed for closed-loop control, while the SPI interface connects to PLCs and embedded controllers. The 10-pin uMAX package suits dense DIN-rail designs.
추천
Handheld Measurement Instruments
The MAX1162ACUB+T's small 10-pin uMAX footprint and low power consumption suit handheld multimeters and portable measurement instruments where PCB real estate is constrained and battery life matters. The 16-bit resolution delivers laboratory-grade accuracy in a pocket form factor. The serial interface simplifies connection to low-pin-count microcontrollers.
추천
Medical Monitoring Devices
In medical monitoring applications such as bedside patient monitors and ambulatory recorders, the MAX1162ACUB+T provides 16-bit accuracy for vital-sign signal acquisition. Its low shutdown current extends battery life in wearable monitors, while the SPI interface connects to medical-grade microcontrollers. The deterministic SAR conversion avoids pipeline-delay artifacts in real-time monitoring.
추천
Battery-Powered Sensor Interfaces
Wireless sensor nodes and IoT edge devices benefit from the MAX1162ACUB+T's 10 uA shutdown current between conversions, dramatically reducing average power for duty-cycled sampling. The 200 ksps sampling rate captures transient events, while the 16-bit resolution supports precision environmental and structural monitoring. The small uMAX package suits miniaturized sensor PCBs.
추천
Precision Weigh Scales
Precision weighing scales and laboratory balances leverage the MAX1162ACUB+T's 16-bit no-missing-codes performance for accurate load-cell digitization. The 0-to-VREF input range directly interfaces with strain-gauge bridges (via instrumentation amplifier), and the SPI interface connects to display and calibration microcontrollers. Low power suits battery-operated portable scales.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX1162ACUB+T — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX1162ACUB+ | MAX1162BCUB+ | MAX1162BEUB+T | MAX1162CEUB+T | MAX1162AEUB+T |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 10-pin uMAX | 10-pin uMAX - same | 10-pin uMAX - same | 10-pin uMAX - same | 10-pin uMAX - same | 10-pin uMAX - same |
| Resolution | 16 bits | 16 bits | 16 bits | 16 bits | 16 bits | 16 bits |
| Sampling Rate | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 200 ksps |
| Supply Voltage | +5V | +5V | +5V | +5V | +5V | +5V |
| Accuracy Grade | A-grade | A-grade | B-grade (tighter INL/DNL) | B-grade (tighter INL/DNL) | C-grade | A-grade |
| Packaging | Tape and Reel | Tube | Tube | Tape and Reel | Tape and Reel | Tape and Reel |
| Shutdown Current | 10 uA | 10 uA | 10 uA | 10 uA | 10 uA | 10 uA |
주요 차별점
- Ultra-low 10 uA shutdown current with fast 1.1 us wakeup (vs MAX1162ACUB+)
- 10-pin uMAX footprint with integrated track-and-hold (vs MAX1162BCUB+)
- A-grade accuracy at lowest cost (vs MAX1162BEUB+T)
설계 노트
Place a 0.1 uF ceramic bypass capacitor as close as possible to the VDD pin (Pin 4), with a 10 uF bulk tantalum or ceramic on the VDD trace. According to the Maxim datasheet, the MAX1162ACUB+T draws typical active supply current during conversion and drops to 10 uA in shutdown. Adequate VDD decoupling is critical to achieving the datasheet's 16-bit no-missing-codes performance.
Keep analog (AIN, REF) traces short and away from digital switching lines (SCLK, DOUT, CS) to minimize digital crosstalk into the analog input. Use a ground plane and place the reference capacitor (typically 0.1 uF to 10 uF) close to the REF pin. Per Maxim recommendations, star-ground the AGND and DGND connections at a single point near the IC.
Drive the SCLK input with a clean digital signal; excessive ringing or slow edges can cause double-clocking and corrupt the conversion result. Per the Maxim datasheet, SCLK frequencies up to 4 MHz are supported. Add a small series resistor (22-33 ohm) at the SCLK source if long traces cause reflections, and ensure CS transitions low at least 10 ns before the first SCLK rising edge.
Do not leave the REF pin floating - always connect a low-noise external reference (e.g., MAX6125 or equivalent) or filtered VDD-derived voltage. Per the Maxim datasheet, the input-voltage range is 0 to VREF, so an unstable or noisy REF directly degrades conversion accuracy. Also ensure CS returns high between conversions to trigger automatic power-down and minimize average supply current.
규정 준수 정보
RoHS compliant per Maxim Integrated product page. Not AEC-Q100 qualified; choose MAX1162AEUB+T or industrial-grade variants for automotive or harsh-environment applications. Halogen-free status not explicitly listed in Available Legacy data.
