MAX130EPL+ - 16-Bit Dual-Slope ADC | Maxim Integrated
부품 번호: MAX130EPL+ ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MAX130EPL+ 개요
A dual-slope ADC is a integrating analog-to-digital converter that integrates the unknown input for a fixed interval and compares it with a reference over another interval. This method is well suited to slowly changing or low-frequency measurements because it averages periodic disturbances and can provide good noise performance when the integration timing and digital filtering are selected appropriately. The MAX130EPL+ belongs to the broader ADC and data-conversion semiconductor hierarchy.
The verified sources identify the device as a 16-bit converter with a dual-slope conversion technique, one channel, parallel word access, CMOS technology, and a PDIP-40 package. They also describe the MAX130 family as 3.5-digit A/D converters with a bandgap reference. The listed package is a 40-pin plastic DIP, making the part suitable for through-hole industrial and instrumentation designs rather than compact surface-mount assemblies.
The integrated bandgap reference provides the conversion system with a stable internal reference function. Exact reference voltage, input range, conversion time, accuracy, operating temperature, supply voltage, and current consumption were not supplied in the verified excerpts, so those parameters remain unspecified here. Engineers should consult the manufacturer datasheet before setting analog gain, selecting reference components, or calculating timing margins.
Typical uses include digital panel meters, laboratory measurement equipment, process monitoring, industrial instrumentation, sensor interfaces, and low-frequency data acquisition. The 40-pin PDIP footprint favors prototypes, repairable equipment, and industrial control boards where through-hole assembly and generous component spacing are useful. The parallel output can simplify connection to older microprocessors, counters, display drivers, or custom digital control logic.
For a new design, verify the complete electrical limits, reference requirements, input conditioning, acquisition timing, and pin mapping against the official datasheet. Do not infer a replacement from the 40-pin package alone: the replacement must match the pinout, conversion method, reference arrangement, input range, interface timing, and measurement accuracy requirements.
드롭인 대체품: MAX130EPL+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MAX7129CPL+
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TC7106CPL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX130EPL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX130EPL+ 최대 정격 & 전기적 특성
| Converter Type | Dual-slope ADC |
| 분해능 | 16 bit |
| Number of Functions | 1 |
| Number of Channels | 1 |
| Output Access | Parallel word |
| Process Technology | CMOS |
| Reference | Bandgap reference |
| 패키지 | PDIP-40 |
| Package Type | Plastic DIP |
| 핀 수 | 40 pins |
| 실장 유형 | Through-hole |
| Temperature Grade | Industrial |
| Terminal Count | 40 terminals |
| Package Shape | Rectangular |
| ADC Description | 3.5-digit A/D converter with bandgap reference |
MAX130EPL+ rectangular 핀 구성 가이드
MAX130EPL+(rectangular 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MAX130EPL+.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX130EPL+ 적합 용도: 7 애플리케이션s: Digital Panel Meters, Industrial Process Monitoring, Laboratory Measurement Equipment, Sensor Interface Modules, Data Acquisition Control Boards, Temperature and Process Control, Educational and Prototype Electronics.
Digital Panel Meters
The MAX130EPL+ fits digital panel-meter designs that convert a slowly changing analog measurement into a numeric display value. Its confirmed dual-slope conversion method is appropriate for integrating input information over time, while the 16-bit word and parallel access can feed a counter, display driver, or embedded controller. The integrated bandgap reference is useful when the measurement system needs a defined reference function. Because the exact input range and conversion time are not provided, the sensor scaling, reference calibration, and display update rate must be designed from the official datasheet.
추천
Industrial Process Monitoring
The MAX130EPL+ can serve in industrial process-monitoring equipment when a single analog measurement must be digitized for thresholding, control, or logging. The verified industrial-temperature classification and 40-pin through-hole package support repairable control boards and prototype instrumentation. A dual-slope ADC is useful when input variation is relatively slow and averaging is acceptable, but the input common-mode range, supply requirements, and calibration method remain to be verified. Signal conditioning and protection must be selected around the actual sensor and factory limits.
추천
Laboratory Measurement Equipment
The MAX130EPL+ is a candidate for laboratory instruments that measure one analog variable and present the result through a parallel digital interface. A dual-slope architecture can help average noise when the measurement speed is not critical, and the 40-pin PDIP format is convenient for hand-built or repair-oriented instrumentation. The confirmed 16-bit specification should not be interpreted as guaranteed system accuracy until gain, reference, clock, input filtering, and calibration error are included in the error budget. Engineers should preserve the converter's specified signal and supply conditions.
추천
Sensor Interface Modules
The MAX130EPL+ can be used as the conversion element in a sensor-interface module when the sensor output is slow enough for an integrating ADC. Its one-channel input and parallel word access simplify connection to a small control system, while the bandgap reference provides a defined reference function for the conversion system. The analog front end must handle sensor excitation, filtering, overvoltage protection, and grounding. Since the verified data does not state input range or supply voltage, interface components should be selected only after those electrical limits are confirmed from the manufacturer datasheet.
추천
Data Acquisition Control Boards
The MAX130EPL+ is suitable for a simple single-channel data-acquisition control board when parallel data readout and a through-hole package are acceptable. The controller can capture the converted word and apply calibration, limits, filtering, or display formatting in software or firmware. The design must account for digital bus timing, output settling, control-signal polarity, and analog settling between conversions. A 40-pin PDIP footprint is mechanically straightforward but occupies substantial board area compared with surface-mount ADC packages, so this architecture is best where repairability and traditional through-hole assembly outweigh density.
추천
Temperature and Process Control
The MAX130EPL+ can be applied to slow process-control loops in which a sensor signal is converted for comparison against setpoints or transmitted to a controller. The confirmed dual-slope method is compatible with measurements where averaging over time is useful, and the industrial-temperature classification supports industrial equipment evaluation. Control-loop response time, sensor noise, input filtering, and reference stability determine whether the architecture is practical. Exact operating-temperature, accuracy, and input-range limits were not included in the verified excerpts and must be confirmed before using the part in a production control system.
추천
Educational and Prototype Electronics
The MAX130EPL+ is well suited to educational prototypes because it combines a documented 16-bit dual-slope ADC, parallel word access, an integrated bandgap reference, and a 40-pin PDIP footprint. Students can observe conversion behavior, digital output timing, reference sensitivity, and input filtering on a breadboard or through-hole prototype board. The large package makes pin identification and measurement easier than a fine-pitch surface-mount device. The prototype should still include regulated supply bypassing, input protection, and a defined interface driver so that demonstration results are not distorted by setup errors.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX130EPL+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX7129CPL+ | TC7106CPL | MAX130EPL |
|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | PDIP-40 | PDIP-40 | PDIP-40 | PDIP-40 |
| Pin Count | 40 pins | 40 pins | 40 pins | 40 pins |
주요 차별점
- Confirmed 16-bit dual-slope conversion format (vs TC7106CPL)
- Parallel word access (vs MAX7129CPL+)
- Integrated bandgap reference (vs TC7106CPL)
설계 노트
Do not finalize the analog or digital supply network until the official MAX130EPL+ datasheet confirms supply voltage, supply current, sequencing, and allowable input levels. Place bypass capacitors close to the corresponding power and ground pins, and keep high-current return paths away from the analog reference and input traces. The verified sources do not specify the supply limits, so any rail choice would otherwise be speculative.
Route the analog input, reference, and ground connections as short and controlled as possible, and mount input filtering or protection close to the corresponding pins. A dual-slope converter can be sensitive to noise and timing conditions even though the exact integration and clock requirements are not present in the supplied excerpts. Preserve the manufacturer's recommended pin orientation and avoid routing digital output transitions beneath the analog input or reference network.
The verified data confirms a 40-pin PDIP package but does not provide the individual pin map. Before assembly or replacement, cross-check every pin against the manufacturer datasheet and verify signal direction, supply rails, reference connections, control polarity, and output timing. Do not treat MAX7129CPL+ or TC7106CPL as drop-in parts solely because they are described as similar 40-pin PDIP ADCs; electrical differences are explicitly noted for TC7106CPL.
규정 준수 정보
The supplied verified excerpts identify industrial-temperature classification but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be verified using current manufacturer documentation for the exact ordering code.
