MAX31856MUD+ Precision Thermocouple Converter | Analog Devices
부품 번호: MAX31856MUD+ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.4004 | $3.40 |
| 10 | $3.4004 | $34.00 |
| 100 | $3.4004 | $340.04 |
| 500 | $3.4004 | $1,700.20 |
| 1,000 | $3.4004 | $3,400.40 |
MAX31856MUD+ 개요
A thermocouple-to-digital converter is an interface IC that conditions a low-voltage thermoelectric voltage, performs cold-junction compensation, applies the appropriate linearization for the selected thermocouple type, and transfers temperature data to a host controller. The MAX31856 belongs to the sensor and detector interface category and sits between physical temperature sensors and digital embedded systems. Its digital interface makes temperature monitoring suitable for industrial equipment, test systems, control loops, and embedded instrumentation.
The verified manufacturer result identifies cold-junction compensation, thermocouple signal digitisation, linearization, Celsius output format, and 0.0078125°C resolution as central features. The device is supplied in a 14-pin TSSOP package, with the MUD+ ordering code shown by DigiKey as a thermocouple-to-digital converter IC. The source material does not provide a complete verified set of electrical limits, SPI timing values, thermocouple input ranges for every type, or package dimensions, so those values are not inferred here.
Because a thermocouple measures the temperature difference between a sensing junction and a reference junction, cold-junction compensation is essential for accurate measurements near ambient temperature. The MAX31856 handles this function internally, allowing the host system to receive compensated digital temperature data rather than raw thermocouple voltage. Digital linearization further reduces the software burden associated with converting nonlinear thermocouple voltage into temperature.
Typical uses include industrial furnace monitoring, temperature-controlled processes, laboratory equipment, environmental monitoring, and embedded thermal control. In each case, the thermocouple type, wiring, cold-junction implementation, grounding strategy, and digital interface configuration must be selected according to the manufacturer's datasheet. The verified data does not identify a specific companion MCU or application reference design, so companion products are not asserted as manufacturer-recommended parts.
The principal design consideration is ensuring that the selected thermocouple, input filtering, grounding, and digital interface match the system measurement range. For thermocouple signals, keeping the analog input path away from switching nodes and noisy digital return currents helps preserve measurement integrity. This page consolidates verified distributor listings, the official Analog Devices product page, and the available cross-reference information without inventing missing electrical parameters.
드롭인 대체품: MAX31856MUD+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MAX31856MUD+T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX31856MUD+ 사양
| Product Type | Thermocouple-to-digital converter IC |
| Thermocouple Input | 1 thermocouple input |
| Digital Output | Digital output |
| Temperature Resolution | 0.0078125°C |
| 동작 온도 | -55°C to 125°C |
| Maximum Thermocouple Reading | +1800°C |
| Cold-Junction Compensation | Supported |
| Thermocouple Signal Linearization | Supported |
| Output Temperature Format | Degrees Celsius |
| 패키지 | 14-pin TSSOP |
| Package Family | TSSOP |
| 실장 유형 | Surface mount |
| Product Category | Sensor and detector interface |
| Manufacturer | Analog Devices / Maxim Integrated |
MAX31856MUD+ tssop 핀 구성 가이드
MAX31856MUD+(tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX31856MUD+.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX31856MUD+ 적합 용도: 6 애플리케이션s: Industrial Furnace Temperature Monitoring, Laboratory Temperature Instrumentation, Environmental Monitoring Sensors, Process Control Loops, Test and Measurement Equipment, Thermocouple-Based Heating Control.
Industrial Furnace Temperature Monitoring
The MAX31856MUD+ fits industrial furnace monitoring because it converts a thermocouple signal into a digital temperature value and performs cold-junction compensation and linearization. The verified 0.0078125°C resolution is useful when a controller needs a finely digitized temperature input, while the documented capability for readings as high as +1800°C supports high-temperature thermocouple systems. Place the converter electrically close to a controlled ground and keep thermocouple wiring away from high-current switching paths. The thermocouple type, extension-wire arrangement, and final calibration must follow the manufacturer’s application guidance.
추천
Laboratory Temperature Instrumentation
Laboratory instruments often combine a thermocouple probe with a digital control or logging system, and the MAX31856MUD+ provides the thermocouple conversion stage. Its verified 0.0078125°C resolution provides a precise digital increment, while cold-junction compensation helps correct the reference-junction effect that otherwise introduces error near room temperature. Digital linearization reduces the host-controller burden compared with implementing the thermocouple curve entirely in firmware. The design should use a thermocouple appropriate for the intended measurement range and preserve the analog input path from noise.
추천
Environmental Monitoring Sensors
The MAX31856MUD+ can be used in environmental monitoring systems where a remote thermocouple measures temperature and a microcontroller records or transmits the result. Its Celsius-formatted digital output simplifies data handling for embedded controllers, while the converter’s cold-junction compensation supports more accurate readings when the measurement junction and reference junction are exposed to different local conditions. The -55°C to 125°C device range identified in the verified listing is relevant to the surrounding electronics. Cable length, thermocouple polarity, grounding, and EMI shielding should be reviewed for each installation.
추천
Process Control Loops
Use the MAX31856MUD+ when a process-control loop requires temperature feedback from a thermocouple rather than a simple resistive sensor. The device digitises and linearizes the thermocouple signal, allowing a controller to compare the process temperature against a setpoint and adjust heaters, valves, or actuators. Its verified high-temperature capability of +1800°C can support demanding processes when paired with an appropriate thermocouple. Because the supplied data does not specify conversion latency, calibration coefficients, or digital timing, those details must be confirmed in the manufacturer datasheet before defining a control-loop update rate.
추천
Test and Measurement Equipment
The MAX31856MUD+ is appropriate for bench and embedded test systems that accept thermocouple probes and need a digital temperature representation. The 0.0078125°C resolution can support test displays, logging, and comparison functions, while the Celsius output avoids unnecessary host-side unit conversion. A good implementation places the thermocouple input and ground return in a controlled analog area and provides stable supply and decoupling according to the datasheet. Calibration records and probe type must also be handled by the test system because resolution alone does not establish total measurement accuracy.
추천
Thermocouple-Based Heating Control
In heating equipment, the MAX31856MUD+ can convert the thermocouple feedback signal into a digital value for a controller that operates heaters through a separate power stage. The verified Celsius output and linearization simplify the feedback path, and the documented +1800°C reading capability can suit specialized heating applications. The converter should not be used as the power-switching element itself; its role is measurement and signal conversion. Use an appropriately rated thermocouple, isolation strategy, and power-stage design so the low-level measurement path is not exposed to unsafe switching transients.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX31856MUD+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX31856MUD+T |
|---|---|---|
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Brand | Analog Devices | Analog Devices |
주요 차별점
- Integrated thermocouple conditioning (vs MAX31856MUD+T)
- Fine digital temperature increment (vs MAX31856MUD+T)
- High-temperature measurement capability (vs MAX31856MUD+T)
설계 노트
Route the thermocouple input and its return path as a compact, isolated analog pair. Keep the input path away from switching nodes, high-current power returns, and digital clock traces because thermocouple voltages are small and can be affected by ground currents and EMI. Use the manufacturer’s recommended grounding and filtering arrangement rather than treating the thermocouple wires as ordinary digital signals.
Verify the thermocouple type, polarity, and physical temperature range before connecting a probe. The MAX31856MUD+ supports readings as high as +1800°C according to the official product-page result, but that capability does not mean every thermocouple or wiring installation is safe at that temperature. Also distinguish the listed -55°C to 125°C device environment from the maximum thermocouple measurement temperature.
Place bypass capacitors and the analog input-conditioning components close to the device pins and preserve a quiet reference area around the thermocouple interface. Confirm the complete pinout, package drawing, and recommended application circuit in the manufacturer datasheet before layout release. The supplied search results do not include the required capacitor values or pin-by-pin assignment, so those details should not be inferred.
규정 준수 정보
The supplied verified search results do not state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status for MAX31856MUD+. No compliance claim is inferred from the distributor or manufacturer page snippet.
