MAX3243IDWRE4 - 3.3V RS-232 Transceiver | Texas Instruments
부품 번호: MAX3243IDWRE4 ✓ 활성MAX3243IDWRE4 개요
An RS-232 transceiver is an interface IC that combines differential line drivers with receivers so that logic-level signals can be transmitted between a digital system and an RS-232 port. The MAX3243IDWRE4 belongs to the multichannel RS-232 interface family, placing several driver and receiver functions in one package while reducing the number of external components required around the physical serial connection.
The principal electrical features include operation from a 3 V to 5.5 V supply, CMOS-compatible logic interfaces, low supply current through the AutoShutdown feature, and ±15 kV ESD protection rated using the human-body-model test method. The operating-temperature specification for this ordering code is 0 °C to 70 °C. The device is identified as a 3/5 transceiver with 28 pins in an SSOP, 5.30 mm, MO-150 package.
MAX3243-family devices are useful when a system must translate between CMOS/TTL-level UART signals and RS-232 levels. The integrated protection helps reduce the vulnerability of the interface pins to electrostatic discharge encountered during handling, connection changes, and normal industrial or commercial equipment use. The AutoShutdown function is intended to reduce supply consumption when valid signal activity is not detected.
Typical applications include multi-channel serial ports, data acquisition and control systems, industrial communication equipment, test and measurement instruments, and embedded systems that need more than one RS-232 connection. When laying out the board, place the transceiver close to the connector and follow the manufacturer pin-description table for driver, receiver, supply, ground, and charge-pump connections. Add suitable bypass capacitance and route the RS-232 connector-side nets away from sensitive analog or high-speed digital traces.
For a new design, verify the complete pinout and operating limits in the MAX3243 manufacturer datasheet before assigning connector signals or external protection components. The MAX3243IDWRE4 is appropriate when a 28-pin, 3.3V-compatible, multichannel RS-232 interface with integrated ESD protection is required, while the exact replacement must be checked for package, pinout, temperature rating, and lifecycle requirements.
드롭인 대체품: MAX3243IDWRE4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3243IDWRE4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, ESD Protection, Maximum Data Rate, RoHS Status.
MAX3243EIDWR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MAX3243EIDWRG4
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MAX3243IDWR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX3243IDWRG4
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MAX3243EEUI/T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3243IDWRE4 사양
| Device Type | Multichannel RS-232 transceiver |
| Technology | RS-232, CMOS |
| Supply Voltage Range | 3 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V |
| Number of Channels | 3/5 transceiver |
| 동작 온도 | 0 °C to 70 °C (32 °F to 158 °F) |
| Package Type | SSOP, 5.30 mm, MO-150, SSOP-28 |
| 핀 수 | 28 |
| ESD Protection | ±15 kV HBM |
| 공급 전류 | 1 µA AutoShutdown feature |
| Transceiver Configuration | RS-232 line driver and receiver |
| Logic Interface | CMOS |
| 실장 유형 | Surface mount |
| Manufacturer | Texas Instruments |
| Product Lifecycle | Active |
| Data Sheet Source | MAX3243 manufacturer datasheet |
MAX3243IDWRE4 ssop, 5.30 mm, mo-150, ssop-28 핀 구성 가이드
MAX3243IDWRE4(ssop, 5.30 mm, mo-150, ssop-28 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3243IDWRE4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3243IDWRE4 적합 용도: 6 애플리케이션s: Industrial RS-232 Control Interfaces, Multi-Port Data Acquisition, Test and Measurement Equipment, Embedded Serial Communication, RS-232 Port Expanders, Communication and Networking Equipment.
Industrial RS-232 Control Interfaces
The MAX3243IDWRE4 fits industrial equipment that must translate between a 3.3 V controller and multiple RS-232 devices. Its 3 V to 5.5 V supply range supports common embedded rails, while ±15 kV HBM ESD protection helps protect the interface during equipment installation and maintenance. The multichannel arrangement reduces the number of separate transceiver packages required when several serial ports share a controller. Confirm channel count, logic thresholds, baud-rate support, and connector-side protection in the manufacturer datasheet before finalizing the schematic.
추천
Multi-Port Data Acquisition
The MAX3243IDWRE4 is suitable for data-acquisition equipment that connects a controller or embedded processor to several RS-232 instruments. Its 28-pin multichannel transceiver format helps consolidate serial interface conversion into one package, while the 3.3 V-compatible supply operation aligns with modern digital systems. The ±15 kV HBM rating improves robustness at connector-adjacent pins, although external cable protection may still be appropriate. Validate driver loading, receiver thresholds, and the complete connector wiring against the MAX3243 datasheet.
추천
Test and Measurement Equipment
The MAX3243IDWRE4 can support legacy RS-232 communication in test instruments, bench controllers, and automated measurement systems. Its multichannel 3/5 transceiver configuration allows a compact instrument to offer several serial service ports without assigning a separate interface IC to each connector. Operation from 3 V to 5.5 V supports both 3.3 V and 5 V logic domains, and the integrated ESD protection is useful where users repeatedly attach and remove external cables. Confirm the required data rate and full-duplex channel arrangement during design review.
추천
Embedded Serial Communication
The MAX3243IDWRE4 is appropriate for embedded systems that retain RS-232 ports for legacy peripherals, service consoles, or configuration interfaces. The 3.3 V supply capability allows operation alongside modern embedded processors, while the CMOS logic side simplifies digital interfacing. AutoShutdown can help reduce power consumption when no valid serial activity is present. Because RS-232 is a point-to-point interface, the channel allocation and driver direction must be assigned carefully in the firmware and hardware design, using the manufacturer pin-description table as the authority.
추천
RS-232 Port Expanders
The MAX3243IDWRE4 can serve as the electrical interface in systems that need more serial ports than the host controller provides directly. Consolidating several driver and receiver functions into one 28-pin package helps reduce board area compared with multiple single-channel transceivers. Its 3 V to 5.5 V operating range supports common industrial and embedded rails, while integrated HBM ESD protection adds a useful layer of connector-side robustness. The final design should include correct ground handling, connector pinout checks, and protection appropriate to the cable environment.
추천
Communication and Networking Equipment
The MAX3243IDWRE4 is suitable for communication equipment that exposes service or management ports through RS-232. Its multichannel package can serve several command or diagnostic interfaces in a compact system, and the 3.3 V-compatible operation helps integrate with current digital logic. The ±15 kV HBM ESD rating is useful for exposed communication connectors, but it should not be interpreted as a complete lightning or surge solution. Use the MAX3243 datasheet to verify signal integrity, pin direction, and thermal requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3243IDWRE4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3243EIDWR | MAX3243EIDWRG4 | MAX3243IDWR | MAX3243IDWRG4 | MAX3243EEUI/T |
|---|---|---|---|---|---|---|
| Package | SSOP-28, 5.30 mm, MO-150 | SSOP-28 | SSOP-28 | SSOP-28 | SSOP-28 | TSSOP-28 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Device Type | 3/5 multichannel RS-232 transceiver | MAX3243-family RS-232 transceiver | MAX3243-family RS-232 transceiver | MAX3243-family RS-232 transceiver | MAX3243-family RS-232 transceiver | MAX3243-family RS-232 transceiver |
| Number of Pins | 28 | 28 | 28 | 28 | 28 | 28 |
주요 차별점
- Single-package multichannel RS-232 interface (vs MAX3243IDWR)
- Integrated ESD protection for connector-side pins (vs MAX3243IDWRG4)
- 3.3 V system compatibility (vs MAX3243EEUI/T)
설계 노트
Place the MAX3243IDWRE4 close to the RS-232 connector and keep the driver outputs and receiver inputs physically separate from sensitive digital or analog nets. Follow the manufacturer datasheet for the recommended charge-pump capacitor and bypass-capacitor connections. A compact placement reduces exposed trace length and helps preserve RS-232 signal behavior at the connector.
Design the 3 V to 5.5 V supply rail with enough decoupling for the MAX3243 internal charge-pump circuitry. Use the capacitor values and placement shown in the manufacturer datasheet, and verify that the source can support the operating current plus the transient demand of the AutoShutdown and RS-232 driver operation. The 3.3 V-rated target ordering code must not be operated outside its specified limits.
Do not treat the integrated ±15 kV HBM rating as complete cable-surge protection. Long RS-232 runs may need external protection, and connector shields should be connected according to the equipment grounding strategy. Also verify the exact driver and receiver direction for every channel in the MAX3243 pin-description table; confusing TX and RX connections is a common integration error.
규정 준수 정보
The verified technical data does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for this ordering code. The E4 suffix indicates a lead-free termination according to common ordering conventions, but this should be confirmed against the manufacturer product documentation before formal compliance use.