MC9S08MP16VWL - 8-Bit 51.34MHz 16KB Flash MCU | NXP
부품 번호: MC9S08MP16VWL ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.2618 | $2.26 |
| 10 | $2.3078 | $23.08 |
| 100 | $2.3078 | $230.78 |
| 500 | $2.3078 | $1,153.90 |
| 1,000 | $2.3078 | $2,307.80 |
MC9S08MP16VWL 개요
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O, timers, communication interfaces, and supporting control logic on one package. The MC9S08MP16VWL belongs to the HCS08 and S08 microcontroller families, combining an 8-bit processor architecture with embedded Flash and mixed-signal-capable control peripherals. This hierarchy places it between simple fixed-function logic and higher-performance 32-bit processors.
The verified feature set identifies an 8-bit HCS08 CPU, an extended instruction set with the BGND instruction, and additional addressing modes for LDHX and STHX. Its maximum operating frequency is 51.34 MHz under the specified 2.7V-to-5.5V conditions. The 16KB Flash configuration supports compact firmware storage, while the 28-SOIC package is available in a 0.295-inch, 7.50mm-width body format according to distributor data.
The S08 architecture is suited to control loops, digital monitoring, signal conditioning, communications, and embedded products that need deterministic low-cost processing. Its small package can simplify board assembly in space-constrained equipment, while Flash memory permits firmware updates and configuration tables without external program-memory hardware. The device is specifically identified for stepper-motor processor applications in a retrieved datasheet listing.
Because the provided sources do not expose the complete peripheral map, RAM capacity, timer resources, communication ports, electrical limits, or detailed timing information, those values are not inferred here. Designers should consult the MC9S08MP16 series datasheet before allocating pins, selecting decoupling, configuring clocking, or programming the device. This page combines verified product identity, distributor pricing references, sourcing information, and design guidance without filling unverified gaps.
드롭인 대체품: MC9S08MP16VWL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MC9S08MP16VWL 최대 정격 & 전기적 특성
| Product Type | 8-bit HCS08 microcontroller |
| CPU Architecture | 8-bit HCS08 |
| Maximum CPU Frequency | 51.34 MHz |
| Flash Memory | 16KB (16K x 8) |
| Supply Voltage Range | 2.7V to 5.5V |
| 동작 온도 범위 | -40°C to +105°C |
| Extended Temperature Performance | Up to 40 MHz from -40°C to +125°C |
| Instruction Set | HC08 instruction set with BGND, LDHX, and STHX extensions |
| 패키지 | 28-SOIC |
| Package Body Width | 0.295 inch (7.50 mm) |
| 실장 유형 | Surface Mount |
| Core | S08 |
| RoHS 상태 | unknown |
| REACH Status | unknown |
MC9S08MP16VWL 0.295 inch (7.50 mm) 핀 구성 가이드
MC9S08MP16VWL(0.295 inch (7.50 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08MP16VWL.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08MP16VWL 적합 용도: 7 애플리케이션s: Stepper-Motor Control, Industrial Digital Control, Low-Cost Consumer Appliance, Embedded Measurement Controller, Communications Gateway Module, Compact Automation Controller, Portable Embedded Device.
Stepper-Motor Control
MC9S08MP16VWL fits embedded stepper-control systems where a compact 8-bit controller handles sequencing, timing, and supervisory logic. Its verified 8-bit HCS08 CPU operates up to 51.34 MHz at 2.7V to 5.5V, while the datasheet search specifically associates the MP16 series with processors for stepper motors. The controller can coordinate input decoding, motion commands, and driver sequencing, provided the selected board exposes suitable timers, PWM resources, and I/O. Confirm those peripheral assignments and electrical limits in the complete datasheet before finalizing the motor-drive stage.
추천
Industrial Digital Control
The MC9S08MP16VWL is suitable for compact industrial control modules that combine digital inputs, sequencing logic, and local supervisory functions. Its 16KB Flash capacity supports embedded control firmware, while the 2.7V-to-5.5V operating range allows integration with regulated 3.3V or 5V system rails. The 28-SOIC package supports conventional surface-mount assembly and can simplify board sizing compared with larger packages. Designers should verify industrial temperature requirements, ESD protection, watchdog behavior, and communication peripherals against the manufacturer datasheet.
추천
Low-Cost Consumer Appliance
MC9S08MP16VWL can serve as the main embedded controller in a compact appliance or consumer device requiring local logic, firmware storage, and deterministic control. Its 8-bit S08 architecture is appropriate for simple control loops and state machines, and the verified 16KB Flash avoids a separate program-memory device for modest applications. The 51.34MHz maximum frequency provides processing headroom, but actual utility depends on the selected peripherals and firmware workload. Validate reset, power consumption, pin multiplexing, and production programming requirements before release.
추천
Embedded Measurement Controller
MC9S08MP16VWL can act as the supervisory controller in an embedded measurement product when the system requires programmable acquisition sequencing, local filtering, status reporting, and configuration storage. The 8-bit HCS08 CPU and 16KB Flash provide a compact firmware platform, while the 28-SOIC package helps reduce board footprint. Its suitability for a particular measurement chain depends on the verified availability and electrical characteristics of ADC, timer, comparator, and communication resources; those details are not present in the supplied search snippets and must be checked in the complete datasheet.
추천
Communications Gateway Module
MC9S08MP16VWL may be used in a small communications gateway or protocol-conversion module when the design needs local packet handling, control logic, and nonvolatile firmware storage. The 16KB Flash and 2.7V-to-5.5V supply range support compact embedded designs, while the S08 instruction set provides a direct control-oriented platform. Communication suitability depends on the exact UART, SPI, I2C, or other interface resources assigned to the selected package variant. Verify pin multiplexing, timing, electrical characteristics, and firmware toolchain support before assigning communications pins.
추천
Compact Automation Controller
MC9S08MP16VWL fits compact automation controllers that coordinate discrete sensors, actuators, and local decision logic. Its 8-bit processor architecture is appropriate for deterministic state-machine control, and the verified 51.34MHz ceiling provides substantial timing margin for general control tasks. The 28-SOIC package can reduce board size while retaining a standard surface-mount assembly format. Before deployment, confirm the number and electrical ratings of I/O pins, timer channels, reset behavior, and any required communication interfaces; those details are not available in the supplied snippets.
추천
Portable Embedded Device
MC9S08MP16VWL can support portable embedded products that require low-cost local control, firmware storage, and compact board construction. Its 16KB Flash is suitable for a focused application rather than a large graphical or storage-heavy workload, and its 8-bit HCS08 core simplifies resource allocation for straightforward control loops. The 2.7V-to-5.5V range offers flexibility around common regulated rails, but battery-powered designs must verify sleep behavior, operating current, and low-voltage limits in the full manufacturer documentation. Pin multiplexing and unused-pin requirements also require datasheet confirmation.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08MP16VWL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08JS16CWJ | MC9S08SH16CWL |
|---|---|---|---|
| Brand | NXP Semiconductors | Freescale Semiconductor / NXP | Freescale Semiconductor / NXP |
주요 차별점
- Verified maximum clock frequency (vs MC9S08JS16CWJ)
- Stepper-motor application association (vs MC9S08SH16CWL)
- Memory and core positioning (vs MC9S08JS16CWJ)
- Temperature-qualified clock ceiling (vs MC9S08JS16CWJ)
설계 노트
Design the supply rail around the verified 2.7V-to-5.5V operating range and the frequency-versus-temperature limits. Place local bulk and bypass capacitors close to the MCU supply pins according to the manufacturer layout guidance. The provided search excerpts do not specify capacitor values, current limits, or power-consumption figures, so do not select those values from this page alone. Validate startup, brownout behavior, and maximum clock operation against the full datasheet.
Use a land pattern corresponding to the exact 28-SOIC variant before routing the PCB. Confirm the manufacturer package drawing and pin numbering, then reserve all required power, ground, reset, clock, programming, and I/O connections. The retrieved sources identify 28-SOIC and a 0.295-inch, 7.50mm-wide body, but they do not provide the complete pinout; therefore, do not rely on an inferred diagram for production release.
Do not treat similar MC9S08 names as drop-in equivalents. MC9S08JS16CWJ and MC9S08SH16CWL appear in comparison results, but the supplied data does not prove identical package pins, peripherals, clocking, or electrical behavior. Check the full datasheet, memory map, peripheral allocation, and programming requirements for each candidate. Also distinguish the -40°C to 105°C maximum-frequency condition from the -40°C to 125°C condition limited to 40MHz.
Keep sensitive clock and reset routing short, maintain a continuous ground reference, and separate potential switching or motor-drive return paths from the MCU area. For stepper applications, route motor-driver currents away from the controller supply and signal traces, and use appropriate protection for exposed interfaces. Exact high-frequency layout limits and external-component recommendations are not included in the verified snippets and must be taken from the manufacturer datasheet.
규정 준수 정보
The verified search results identify the manufacturer, package, electrical highlights, temperature conditions, and distributor references, but they do not provide verified compliance declarations.
