MC9S08PA4AVTJ - 20MHz 8-Bit MCU, 4KB Flash | NXP
부품 번호: MC9S08PA4AVTJ ✓ 활성MC9S08PA4AVTJ 개요
An 8-bit microcontroller is a compact computing platform that integrates a processor core, program memory, data memory, peripherals, and I/O into one device. The S08PA family combines an economical 8-bit CPU with mixed-signal and timing resources, placing it within the hierarchy of embedded microcontroller, 8-bit MCU, and semiconductor products. This device supports up to 40 interrupt and reset sources and four-level nested interrupts, helping separate time-critical control work from background service routines.
Key features include 4 KB of flash, EEPROM, an analog-to-digital converter, an analog comparator, and a motor-control flex timer. The CPU can operate up to 20 MHz across the 2.7 V to 5.5 V supply range. These resources support compact designs that require digital control alongside analog measurement or motor-related timing without adding separate analog or timer ICs.
The MC9S08PA4AVTJ belongs to the NXP S08PA family, which is designed around a reusable 8-bit core, peripheral IP, and development tools. The manufacturer describes the family as scalable and pin-compatible, simplifying migration within compatible S08PA products. Its integrated analog comparator and ADC support threshold supervision, sensor interfaces, and mixed-signal control, while the motor-control flex timer improves deterministic timing for motor and actuator systems.
Typical applications include automotive body and auxiliary controllers, industrial sensor nodes, appliance control boards, motor-control modules, and compact 5 V embedded systems. A 20-pin TSSOP package reduces board footprint while retaining dedicated I/O, communications, timing, and analog functions. The device is particularly appropriate when legacy S08 software, application notes, and established development workflows must be retained.
For PCB implementation, follow the pin-description table and recommended decoupling network in the manufacturer datasheet. Keep the 2.7 V to 5.5 V supply within its specified operating range, validate clock and reset behavior across temperature, and route analog inputs away from switching nodes. The active manufacturer listing supports ongoing sourcing, although current availability should be confirmed through the Request a Quote form.
This page combines the manufacturer specifications, lifecycle status, pricing reference, pinout access, and engineering guidance for the MC9S08PA4AVTJ. It also identifies the verified same-family migration option and explains where application-specific validation remains necessary before production release.
드롭인 대체품: MC9S08PA4AVTJ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MC9S08PA4AVTG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08PA4AVTJ 최대 정격 & 전기적 특성
| CPU Architecture | 8-bit S08 |
| Maximum CPU Bus Frequency | 20 MHz |
| Flash Memory | 4 KB (4K x 8) |
| EEPROM | Integrated |
| 동작 공급 전압 | 2.7 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Interrupt and Reset Sources | Up to 40 sources |
| Nested Interrupt Levels | Up to 4 levels |
| Analog-to-Digital Converter | Integrated |
| Analog Comparator | Integrated |
| Motor Control Flex Timer | Integrated |
| 패키지 | 20-TSSOP |
| Package Width | 4.40 mm (0.173 inch) |
| 핀 수 | 20 pins |
| 실장 유형 | Surface mount |
| EFT and ESD Performance | Manufacturer-highlighted performance; test levels not stated |
| 수명 주기 상태 | Active |
MC9S08PA4AVTJ 4.40 mm (0.173 inch) 핀 구성 가이드
MC9S08PA4AVTJ(4.40 mm (0.173 inch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08PA4AVTJ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08PA4AVTJ 적합 용도: 6 애플리케이션s: Automotive Body Control, Industrial Sensor Node, Motor Control Module, Appliance Control Board, Portable 5 V Controller, LED and Display Controller.
Automotive Body Control
The MC9S08PA4AVTJ fits compact 5 V body-control modules that combine switch inputs, analog sensing, and deterministic timer functions. Its 8-bit S08 CPU operates up to 20 MHz, while 4 KB of flash and integrated EEPROM provide economical code and nonvolatile data storage. The ADC and analog comparator support sensor thresholds, and the motor-control flex timer helps organize actuator timing. The 20-TSSOP package reduces board area, and the S08PA family’s 2.7 V to 5.5 V range supports integration into 5 V vehicle electronics. Validate the exact ordering code against temperature and automotive qualification requirements before production release.
추천
Industrial Sensor Node
The MC9S08PA4AVTJ is appropriate for distributed sensing nodes that must evaluate analog inputs locally and communicate results through limited digital interfaces. Its integrated ADC and analog comparator reduce the need for separate conditioning components when thresholds and proportional measurements must be handled. The 20 MHz S08 CPU provides sufficient control bandwidth for sensor management, diagnostics, and communication tasks, while 4 KB of flash holds application firmware and EEPROM preserves configuration data. Operating from 2.7 V to 5.5 V allows deployment across industrial 5 V systems and regulated embedded rails. Place analog traces away from switching signals and follow the manufacturer grounding and decoupling layout.
추천
Motor Control Module
The MC9S08PA4AVTJ suits compact motor or actuator controllers where timing precision and local analog feedback are important. Its integrated motor-control flex timer provides dedicated timing resources, while the ADC and analog comparator can monitor position, temperature, or supply-related signals. The 8-bit CPU runs up to 20 MHz, allowing control logic to operate alongside diagnostic and safety checks. A 4 KB flash budget favors focused firmware, and the 20-pin TSSOP package supports space-constrained boards. The MCU does not replace external power transistors, current sensing, or protection hardware, so those elements must be sized for the motor and fault conditions.
추천
Appliance Control Board
The MC9S08PA4AVTJ can serve as the central controller in a compact appliance where a 5 V control bus, discrete sensors, and timed outputs are common. Its 20 MHz S08 processor manages state logic, user-interface inputs, motor timing, and diagnostics without requiring a larger processor. The integrated ADC and analog comparator support temperature or level sensing, while the flex timer provides deterministic switching intervals. Four kilobytes of flash supports focused application code, and EEPROM can retain calibration or operating settings. Its 20-TSSOP footprint simplifies dense boards, although layout must preserve clean analog return paths and adequate supply bypassing.
추천
Portable 5 V Controller
The MC9S08PA4AVTJ is suitable for space-conscious portable equipment that uses a regulated 5 V rail and requires local sensing and control. The 2.7 V to 5.5 V operating range provides flexibility across 3.3 V and 5 V system rails, although the final design must respect timing and electrical limits at every operating point. Its 8-bit CPU, 4 KB flash, EEPROM, ADC, comparator, and timer consolidate several functions into one 20-TSSOP device. Low-power behavior should be evaluated against the product duty cycle using the manufacturer data sheet, especially for battery-operated equipment. Select capacitors, routing, and sleep-mode strategy to avoid energy-consuming peripherals.
추천
LED and Display Controller
The MC9S08PA4AVTJ can control LED indicators, segmented displays, or simple status panels when the design values predictable timing and compact integration. The motor-control flex timer can generate repeatable intervals for dimming or blinking, while the 8-bit S08 CPU coordinates inputs and display states. Integrated EEPROM preserves user settings, and the 4 KB flash budget accommodates focused display and control firmware. The ADC may also support ambient-light or panel sensing when those functions are required. Because drive current, switching-edge noise, and grounding determine display performance, use the manufacturer pin assignments and keep high-current return paths separate from sensitive analog and processor connections.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08PA4AVTJ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08PA4AVTG |
|---|---|---|
| Package | 20-TSSOP | 20-TSSOP |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Architecture | 8-bit S08 | 8-bit S08 |
| Maximum CPU Bus Frequency | 20 MHz | 20 MHz |
| Flash Memory | 4 KB (4K x 8) | 4 KB |
| Operating Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Integrated EEPROM | Yes | Yes |
| Analog and Timer Resources | ADC, analog comparator, motor-control flex timer | ADC, analog comparator, motor-control flex timer |
주요 차별점
- Direct same-family migration path (vs MC9S08PA4AVTG)
- Mixed-signal integration (vs MC9S08PA4AVTG)
- Compact 5 V embedded control (vs MC9S08PA4AVTG)
설계 노트
Assign signals from the official pin-description table rather than inferring them from the 20-pin TSSOP outline. Confirm power, ground, reset, oscillator, programming, and multiplexed peripheral functions for the selected device revision. Place the required bypass capacitors adjacent to their designated supply pins and use a continuous ground reference beneath the device. Analog inputs should be routed away from motor-switching and high-current output paths.
Do not assume that every S08PA ordering code is interchangeable solely because it uses the same family footprint. For the MC9S08PA4AVTG migration candidate, verify the suffix-specific temperature range, qualification status, and any option-dependent behavior in the manufacturer data sheet. Preserve the original 20-TSSOP footprint, pin multiplexing, clock configuration, reset behavior, and programming procedure before approving a substitution.
Keep the MCU supply within the specified 2.7 V to 5.5 V range and validate startup, brownout, and transient behavior under the worst load conditions. The manufacturer data sheet contains the required decoupling recommendations and electrical limits. If the board also drives relays, motors, LEDs, or display elements, separate their switched current paths from the MCU supply and return network so controller operation is not disturbed by load transients.
Treat analog and digital layout as distinct signal domains even though the ADC and comparator are integrated. Return analog grounds through a clean, low-impedance path and keep switching-node copper away from sensor inputs. The 20 MHz maximum bus speed requires careful clock and signal routing, while the flexible motor-control timer can produce edges near sensitive analog nets. Review the manufacturer recommended application circuit and pin multiplexing before finalizing component placement and trace geometry.
규정 준수 정보
The manufacturer identifies the S08PA family as providing strong EFT and ESD performance, but specific compliance and automotive qualification claims for the exact ordering code were not stated in the available product information.