MC9S08PL60CQH - 20MHz 8-Bit 60KB Flash MCU | NXP
부품 번호: MC9S08PL60CQH ✓ 활성MC9S08PL60CQH 개요
An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The S08PL belongs to the S08P family of 5 V, 8-bit microcontrollers. This family combines the established S08 core and reusable peripheral intellectual property with mixed-signal and timing functions, helping designers consolidate external components and reduce total system cost while retaining compatibility with the broader S08 development ecosystem.
Key device capabilities include 60 KB of Flash memory, integrated EEPROM, a 10-bit analog-to-digital converter, an analog comparator, and flexible timer resources. The 20 MHz operating frequency provides the timing headroom needed for control loops, periodic sampling, communication tasks, and supervisory logic. The S08PL family's scalable, pin-compatible architecture is intended to simplify migration within the S08P product range.
The MC9S08PL60CQH is designed around the 8-bit S08 central processing unit and a 5 V operating environment. Its Flash program memory supports firmware retention without an external nonvolatile-memory device, while EEPROM supports parameters, calibration values, counters, and service records that may need frequent updates. The ADC and comparator support direct sensing of analog quantities, reducing the need for separate front-end devices in suitable designs.
Typical uses include appliance controllers, motor and valve-control systems, industrial control panels, sensor interfaces, building equipment, and compact consumer products. In an analog-monitoring design, the ADC can sample inputs while the comparator provides a fast threshold function. Flexible timers support periodic excitation, input capture, output compare, and time-based control, allowing multiple timing tasks to be consolidated in one microcontroller.
PCB planning should account for the 64-QFP footprint, exposed programming or debug interfaces, analog-signal routing, and the power requirements of the 5 V supply. Keep analog inputs away from high-current switching paths, use a stable local supply connection, and follow the package dimensions and land pattern in the manufacturer datasheet before fabrication.
This product overview combines the manufacturer specifications with practical design guidance, migration considerations, and a qualified same-package replacement path. It is intended to accelerate component selection while preserving the electrical, mechanical, and firmware assumptions required for a reliable embedded-control design.
드롭인 대체품: MC9S08PL60CQH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MC9S08PT60AVQH
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08PL60CQH 최대 정격 & 전기적 특성
| CPU Architecture | 8-bit S08 central processor unit |
| Maximum CPU Frequency | 20 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 60 KB |
| Program Memory Organization | 60K x 8 bits |
| EEPROM | Integrated |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated |
| Timers | Flexible timer resources |
| Nominal Supply Voltage | 5 V |
| 동작 온도 범위 | -40 °C to +85 °C |
| 패키지 | 64-QFP (14 x 14 mm) |
| 핀 수 | 64 pins |
| 실장 유형 | Surface mount |
| Series | S08PL |
| EFT/ESD Performance | Manufacturer-described excellent EFT/ESD performance |
| 수명 주기 상태 | Active |
MC9S08PL60CQH 64-qfp (14 x 14 mm) 핀 구성 가이드
MC9S08PL60CQH(64-qfp (14 x 14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08PL60CQH.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08PL60CQH 적합 용도: 6 애플리케이션s: Appliance Control, Industrial Sensor Interface, Motor and Valve Control, Building Equipment Controller, Consumer Device Control, Measurement and Threshold System.
Appliance Control
The MC9S08PL60CQH fits appliance controllers that coordinate user inputs, motors, relays, and operating-state monitoring. Its 20 MHz 8-bit CPU provides enough execution bandwidth for sequencing and debounce routines, while 60 KB of Flash holds application firmware without requiring an external program-memory device. The integrated 10-bit ADC can sample temperature or supply conditions, and the analog comparator can support simple threshold detection. The -40 °C to +85 °C range covers many indoor appliance environments. The primary design consideration is keeping inductive motor and relay switching nodes away from the analog inputs, while using the manufacturer datasheet to define decoupling, power sequencing, and exposed-pad requirements.
추천
Industrial Sensor Interface
The MC9S08PL60CQH is appropriate for a compact sensor-conditioning and supervisory controller operating from a 5 V rail. Its 10-bit ADC can digitize analog sensor inputs, while the analog comparator provides a separate threshold-reference function for fast limit detection. Flexible timers can organize periodic conversions, debounce intervals, communication timing, and control updates, and the 20 MHz S08 CPU can service these tasks concurrently through an interrupt-driven design. The 60 KB Flash capacity supports protocol handlers and logging logic, while EEPROM can retain configuration or calibration information. Engineers should isolate sensitive analog routes from switching nodes and use the manufacturer datasheet for the ADC and comparator electrical limits.
추천
Motor and Valve Control
MC9S08PL60CQH can serve as the supervisory controller in a motor or valve system where a dedicated high-power driver handles load switching. The flexible timer resources support repeatable pulse generation, input capture, duty-cycle measurement, and periodic maintenance cycles, while the 20 MHz CPU executes motion-state logic and fault handling. The 10-bit ADC can monitor a motor supply, position sensor, or pressure-related signal, and EEPROM can retain operating counters and configuration. Keep the MCU away from high-current switching paths, include appropriate filtering at analog inputs, and account for transient events when selecting the external driver and protection network.
추천
Building Equipment Controller
The MC9S08PL60CQH is well suited to building-equipment controllers that monitor environmental inputs and coordinate actuators. A 5 V supply, 60 KB Flash, integrated EEPROM, 10-bit ADC, analog comparator, and flexible timers provide a compact control platform for temperature, occupancy, light, or air-handling functions. The 8-bit processor is appropriate when the application prioritizes deterministic low-cost control over high computational throughput. The -40 °C to +85 °C range is useful in equipment rooms, but enclosure temperature must remain within the device rating. Use the manufacturer datasheet to assign power and ground pins and to maintain separation between sensor inputs and relay or motor-driver circuitry.
추천
Consumer Device Control
The MC9S08PL60CQH supports compact consumer products in which an 8-bit MCU must combine control logic with a limited number of analog inputs. Its 20 MHz operating speed supports responsive user-interface polling, state machines, and peripheral coordination, while 60 KB of Flash reduces the need for a separate program-memory component. The ADC, comparator, EEPROM, and flexible timers support key scanning, threshold sensing, parameter storage, and periodic actions without requiring separate components for every function. The 64-QFP package is larger than the smallest leadless options, so board area should be checked against the enclosure and assembly process. Confirm programming, power, and decoupling arrangements against the manufacturer datasheet.
추천
Measurement and Threshold System
MC9S08PL60CQH can implement a compact measurement system in which the 10-bit ADC performs periodic sampling and the analog comparator watches a fast-changing input against a reference threshold. The 20 MHz CPU can filter samples, calculate operating values, update the display or communication interface, and maintain timers for conversion scheduling. EEPROM provides persistent calibration and configuration storage, while 60 KB of Flash holds the measurement algorithm and control logic. The analog section must be designed for the signal range and source impedance presented to the ADC, and the reference network should remain stable. Follow the manufacturer datasheet for conversion timing, comparator behavior, supply requirements, and pin multiplexing.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08PL60CQH — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08PT60AVQH |
|---|---|---|
| Package | 64-QFP (14 x 14 mm) | 64-QFP (14 x 14 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Architecture | 8-bit S08 | 8-bit S08 |
| Program Memory | 60 KB Flash | 60 KB Flash |
주요 차별점
- Specified S08PL mixed-signal integration (vs MC9S08PT60AVQH)
- 60 KB of integrated Flash (vs MC9S08PT60AVQH)
- 20 MHz 8-bit control performance (vs MC9S08PT60AVQH)
- Active manufacturer lifecycle position (vs MC9S08PT60AVQH)
설계 노트
Use the 64-QFP land pattern and board outline specified by the manufacturer datasheet, and route the 5 V supply and ground connections directly to the corresponding pins. Place required decoupling capacitors adjacent to their associated power pins with short, low-loop-area traces. Confirm programming-test access, exposed connections, and assembly clearances before releasing the PCB layout.
Keep the 10-bit ADC and analog-comparator inputs away from relay, motor, and switching-regulator return currents. Use a continuous ground reference, minimize copper area around sensitive analog nets, and place input filtering close to the device where external conditioning is required. Check the source impedance, acquisition behavior, and analog-pin multiplexing in the manufacturer datasheet before fixing the sample-and-hold network.
Do not assume that equal Flash capacity makes two S08 microcontrollers firmware-compatible. MC9S08PT60AVQH uses a different series architecture, so clock registers, peripheral modules, interrupt vectors, pin multiplexing, and memory organization must be compared with MC9S08PL60CQH. Rebuild and test the firmware, and confirm boot, programming, timing, and analog behavior before using the candidate as a production replacement.
Design the 5 V rail for both the MCU and any attached analog or switching peripherals. Use the manufacturer electrical-characteristics table to set steady-state and transient limits, and avoid routing load current through sensitive ground paths. If the board includes relays, motors, or high-current LEDs, use separate return paths and provide local bulk capacitance at the switching stage.
규정 준수 정보
NXP lists the device as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.