MC9S08RD16FJ - 8-Bit 8MHz 16KB Flash MCU | NXP | 32-LQFP
부품 번호: MC9S08RD16FJ ✓ 활성MC9S08RD16FJ 개요
A microcontroller is a programmable embedded controller that combines a processor core, nonvolatile program memory, working memory, and peripherals on one semiconductor device. The S08 architecture belongs to the 8-bit microcontroller hierarchy, where an embedded CPU executes firmware while timers, serial interfaces, and input/output ports support real-time control tasks. Compared with a discrete logic controller, an MCU reduces component count and centralizes application behavior in firmware.
The MC9S08RD16FJ combines a 16 KB Flash memory capacity with an 8 MHz clock in a 32-LQFP package. Its 1.8 V to 3.6 V operating range supports both low-voltage digital systems and industrial or consumer equipment operating from regulated 3.3 V rails. The 7 x 7 mm LQFP format provides a leaded, inspectable package option that can simplify assembly and prototype rework compared with a very small non-leaded package.
This part belongs to the MC9S08RD16 family of S08 embedded processors and controllers. The product listing identifies the device as an 8-bit, 8 MHz MCU with 16K x 8 Flash memory, while the family name provides a consistent basis for firmware and hardware planning. Designers should verify the detailed clock, memory-map, peripheral, pin, and electrical limits in the manufacturer datasheet before fixing the operating configuration.
Typical application areas include small sensor controllers, building-access peripherals, compact motor-control modules, industrial monitoring equipment, and low-power IoT endpoints. The MCU is particularly appropriate when the system requires local logic, serial communications, digital I/O, and firmware updates without the processing overhead of a 32-bit processor. Its 8 MHz clock is suitable for deterministic control loops that do not require intensive computation.
A key design consideration is validating every electrical limit, peripheral function, and alternate-function assignment against the exact package pinout before schematic capture. Designers should also confirm that the selected Flash programming and debug workflow matches the S08 development toolchain. Because different MCU families require different peripheral setups and firmware initialization, software migration should not be treated as a drop-in operation.
This product page consolidates the verified package, clock, memory, voltage-range, and architecture information into an engineering-oriented selection guide. It also identifies the information that must be checked in the manufacturer datasheet, helping teams distinguish a suitable replacement from a merely similar microcontroller before committing to a PCB or firmware revision.
드롭인 대체품: MC9S08RD16FJ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MC9S08RD16FJ 최대 정격 & 전기적 특성
| Product Type | 8-bit embedded microcontroller |
| Architecture | S08 |
| CPU Bit Width | 8 bit |
| Maximum Rated Operating Frequency | 8 MHz |
| Flash Memory | 16 KB (16K x 8) |
| Operating Voltage Range | 1.8 V to 3.6 V |
| 패키지 | 32-LQFP (7 x 7 mm) |
| Total Pin Count | 32 pins |
| 실장 유형 | Surface mount |
| Lead Geometry | 0.4 mm pitch |
| Manufacturer | NXP Semiconductors |
| Original Product Line | Motorola S08 embedded processors and controllers |
MC9S08RD16FJ 32-lqfp (7 x 7 mm) 핀 구성 가이드
MC9S08RD16FJ(32-lqfp (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08RD16FJ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08RD16FJ 적합 용도: 6 애플리케이션s: Low-Power IoT Sensor Nodes, Industrial Monitoring and Control, Building Access and Security Peripherals, Compact Motor and Actuator Control, Consumer Appliance Control, Embedded Instrumentation and Measurement.
Low-Power IoT Sensor Nodes
The MC9S08RD16FJ fits compact sensor nodes that periodically read inputs, process local measurements, and transmit results over a serial interface. Its 1.8 V to 3.6 V operating range supports low-voltage sensors and radio modules, while the 8 MHz S08 processor provides enough control bandwidth for scheduling and protocol handling. The 16 KB of Flash stores application firmware and interrupt routines without requiring external program memory. For a battery-powered design, the critical trade-off is that sleep current and wake time depend on the selected clock mode, enabled peripherals, and firmware behavior, so measure the complete duty cycle before estimating battery life.
추천
Industrial Monitoring and Control
The MC9S08RD16FJ is appropriate for compact industrial modules that monitor digital lines, operate relays, and report machine status through a serial link. Its 8-bit S08 architecture can execute deterministic control logic at an 8 MHz clock, and the 32-LQFP package exposes more connections than a small leadless package while remaining easy to inspect and assemble. The 1.8 V to 3.6 V supply range works with regulated industrial rails when proper transient and noise controls are present. Verify I/O limits, timer resources, isolation requirements, and the operating-temperature grade because environmental ruggedness cannot be inferred from the processor core alone.
추천
Building Access and Security Peripherals
The MC9S08RD16FJ can serve as the controller in access-control readers, keypad interfaces, alarm panels, and compact security modules. Its 16 KB of Flash accommodates protocol handling, event logic, and configuration routines, while the 8 MHz clock supports responsive keypad scanning and contact monitoring. The 32-LQFP package is useful when a design needs numerous control and communication signals without moving to a complex application-specific device. Designers should define fail-safe states, watchdog behavior, tamper handling, and firmware update procedures before deployment, and confirm that the selected electrical and temperature ratings match the installation environment.
추천
Compact Motor and Actuator Control
The MC9S08RD16FJ can control small motors, valves, and actuators when an external bridge or driver handles the power stage. Its 8 MHz S08 core is suited to deterministic direction, speed, and timeout logic, and the 32-LQFP package provides sufficient pins for encoder inputs, status signals, and communications. The 1.8 V to 3.6 V range allows operation from a regulated 3.3 V system rail. The main design trade-off is that the MCU's 16 KB of Flash and limited low-power resources favor modest control algorithms; high current, excessive motor noise, and safety-critical stop functions require external protection and suitable driver components.
추천
Consumer Appliance Control
The MC9S08RD16FJ fits compact appliance controllers that coordinate buttons, indicators, sensors, and a low-speed communications link. The 16 KB of Flash is suitable for product-specific control logic, while the 8 MHz processor supports responsive state-machine operation without an external logic device. Its 1.8 V to 3.6 V operating range works with common low-voltage power trees, and the 32-LQFP package offers a practical balance between pin access and board area. Firmware should include brownout handling, safe outputs during reset, and validation for all connected loads because the MCU rating alone does not define the appliance's functional-safety or regulatory compliance.
추천
Embedded Instrumentation and Measurement
The MC9S08RD16FJ can act as the control processor in small instrumentation modules that acquire digital measurements, apply configuration, and present results through a serial interface. The 8-bit S08 core is suitable for supervisory logic, calibration handling, and instrument state management, and the 16 KB Flash capacity can retain firmware plus parameter tables. The 32-LQFP package provides a practical number of connections for analog-control signals, displays, and communications. Measurement accuracy will depend primarily on the external sensor network and analog circuitry, so the MCU should receive a clean reference and suitable grounding while timing-critical measurements require verified peripheral capabilities.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08RD16FJ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Architecture | S08 |
| CPU Bit Width | 8 bit |
| Maximum Operating Frequency | 8 MHz |
| Flash Memory | 16 KB (16K x 8) |
| Operating Voltage Range | 1.8 V to 3.6 V |
| Package | 32-LQFP (7 x 7 mm) |
| Pin Count | 32 pins |
| Mounting Type | Surface mount |
주요 차별점
- Exact 16 KB S08 configuration (vs MC9S08QE4CTG)
- Inspectable 32-LQFP package (vs Generic 32-pin leadless 8-bit MCU)
- Low-voltage operating range (vs 5 V-only 8-bit MCU)
설계 노트
Use the manufacturer package drawing and pin table to create the 32-LQFP footprint, paying particular attention to pin 1 orientation, the 0.4 mm lead pitch, and pad dimensions. Confirm that exposed or routed ground and supply pins match the selected reference schematic. Place decoupling capacitors close to the device power pins and route them without long loops that increase switching inductance. Program and debug signals should be accessible before final assembly, and the board outline should provide adequate solder-joint inspection space for the leaded package.
Design the supply around the 1.8 V to 3.6 V operating range and verify every attached signal against the electrical limits in the manufacturer datasheet. Include local bulk and high-frequency decoupling at the MCU supply pins, while separating noisy switching currents from analog or sensor rails. Firmware should configure unused ports into defined states before enabling external loads. If the system uses a watchdog or brownout reset, test the complete restart path to ensure outputs remain safe during initialization.
Keep clock, programming, reset, and serial communication routes away from switching nodes and high-current motor or relay wiring. Use a continuous ground reference beneath the MCU where practical and route return currents without crossing digital switching paths. For externally connected cables, add protection close to the connector because ESD and surge events can propagate directly into unprotected pins. The 32-LQFP package is inspectable, but it does not remove the need for controlled return paths, isolation boundaries, and appropriate protection networks.
Do not treat an MCU with the same Flash size or package dimensions as a drop-in replacement. Verify pin functions, alternate-function mappings, clock requirements, memory organization, interrupt behavior, and development-tool support before changing the MPN. Likewise, avoid estimating the complete firmware size from the 16 KB Flash rating alone; reserve space for the bootloader, vectors, library routines, configuration data, and linker overhead. Request the exact MC9S08RD16FJ suffix during procurement to prevent unintended package or ordering differences.
규정 준수 정보
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact orderable device. Confirm the current environmental and material declarations with the manufacturer before production release.