MC9S08RE16CFJ - 8-Bit 16KB Flash MCU | Motorola
부품 번호: MC9S08RE16CFJ ✓ 활성MC9S08RE16CFJ 개요
A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral functions into one component. Within the device hierarchy, this MCU belongs to the S08 family of 8-bit embedded processors and serves as the central control element in systems such as industrial controllers, appliance controls, sensor interfaces, and compact automation modules. Its 16 KB flash capacity provides room for program code, while the 32-LQFP package exposes the required I/O and supply connections through a standardized leaded footprint.
The MC9S08RE16CFJ is identified as an industrial-grade part and operates from an 8 MHz maximum clock in the listed configuration. Its 16 KB flash organization is presented as 16K x 8, indicating byte-addressable nonvolatile program storage. The 32-LQFP package measures 7 x 7 mm and supports compact PCB placement while retaining individually accessible leads for inspection, rework, and prototype assembly.
The S08/HC08 processor architecture is intended for embedded control rather than high-performance computing. Its 8-bit instruction-oriented design is well matched to sequential logic, digital I/O control, timers, counters, communications interfaces, and other tasks that do not require a high-bandwidth processor. This architecture can simplify firmware architecture and reduce system complexity in dedicated control products.
Typical uses include small industrial controllers, appliance and equipment interfaces, building-control modules, sensor nodes, and compact embedded control boards. In these systems, the 8 MHz processing rate supports responsive control loops, while 16 KB of flash accommodates application firmware and configuration routines. The package size also helps reduce PCB area compared with larger leaded microcontroller packages.
Designers should verify the complete pin assignment, reset behavior, clock options, memory map, and peripheral availability in the Motorola MC9S08RE16 datasheet before layout or firmware development. The 7 x 7 mm LQFP geometry requires adequate courtyard clearance and carefully controlled solder-paste deposition. Component orientation, pin-one location, and exposed lead or thermal-pad requirements must follow the package drawing rather than a generic 32-pin footprint.
This product page combines the verified package, memory, frequency, architecture, and temperature-grade information with practical application guidance, sourcing pathways, and a strict pin-compatible replacement assessment. It also distinguishes true drop-in alternatives from parts that merely belong to the same S08 family but use a different package or require different firmware and board-level validation.
드롭인 대체품: MC9S08RE16CFJ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S08RE16CFJ (동일 폼 팩터 및 풋프린트) — 차이점: Product Type.
MC9S08RE16FJ
✅ 드롭인가격 문의
데이터시트 보기 →MC9S08RE16CFJ 최대 정격 & 전기적 특성
| Product Type | 8-bit S08/HC08 microcontroller |
| Maximum CPU Frequency | 8 MHz |
| Flash Memory | 16 KB (16K x 8) |
| 패키지 | 32-LQFP (7 x 7 mm) |
| Number of Terminals | 32 |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| CPU Core | HC08/S08 |
| Program Memory Type | Flash |
| 실장 유형 | Surface mount |
MC9S08RE16CFJ square 핀 구성 가이드
MC9S08RE16CFJ(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08RE16CFJ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08RE16CFJ 적합 용도: 6 애플리케이션s: Industrial Equipment Controller, Appliance Control Module, Sensor Interface Module, Building Control Endpoint, Motorized System Controller, Data Acquisition and Logging.
Industrial Equipment Controller
The Motorola MC9S08RE16CFJ fits compact industrial equipment controllers that coordinate discrete sensors, relays, indicators, and actuator sequencing. Its 8 MHz S08/HC08 core provides deterministic control processing, while 16 KB of flash provides sufficient space for a dedicated control program and operating parameters. The industrial temperature grade is useful when the controller operates in an enclosure with changing ambient temperatures. Place the MCU in a 32-LQFP 7 x 7 mm footprint and route its I/O away from switching-node and relay-coil traces. Verify the exact GPIO count, timers, supply-voltage range, and operating-temperature limits in the MC9S08RE16 datasheet before finalizing the control architecture.
추천
Appliance Control Module
The MC9S08RE16CFJ is suitable for appliance control modules that manage user inputs, status indicators, motors, valves, or heaters through embedded sequencing logic. The 8-bit S08 architecture keeps firmware and hardware requirements manageable for dedicated products, while 16 KB of flash supports application code, lookup tables, and configuration values. Its compact 32-LQFP 7 x 7 mm package supports space-constrained control boards without requiring a fine-pitch BGA. For reliable implementation, separate sensitive sensor inputs from relay, triac, and motor-drive return currents, and use the manufacturer pin-assignment and decoupling guidance when laying out the board.
추천
Sensor Interface Module
The Motorola MC9S08RE16CFJ can serve as the acquisition and control processor in a small sensor-interface module. An 8 MHz operating rate supports polling and conditioning logic for switches, analog front ends, and digital sensors, while the 16 KB flash capacity holds protocol handling and configuration code. The 32-LQFP package provides a practical balance between compact size and inspectable leads. Confirm the available ADC, timer, serial-interface, and I/O resources for the exact RE16 configuration before assigning sensors. Keep sensor grounds and signal traces away from noisy switching paths, and follow the manufacturer land pattern to prevent solder-bridge defects between closely spaced leads.
추천
Building Control Endpoint
The MC9S08RE16CFJ is well matched to building-control endpoints that supervise lighting, HVAC actuators, occupancy inputs, or isolated communications links. The S08/HC08 core's 8 MHz performance is suitable for event-driven control and periodic monitoring, while 16 KB of flash can hold a focused endpoint application. The industrial-grade designation supports deployments where temperature variation is expected. Because isolated interfaces and long wiring runs can introduce electrical transients, use the datasheet's recommended supply and I/O protection methods and keep external protection components close to the board edge. Validate the exact peripheral configuration before assigning communications or timer functions.
추천
Motorized System Controller
The MC9S08RE16CFJ can coordinate low- and medium-complexity motorized systems such as pumps, valves, positioning mechanisms, and small actuator modules. Its 8 MHz processor supports responsive command sequencing and timer-based control, while its 16 KB flash is appropriate for embedded motion routines and state handling. The MCU should remain isolated from high-current motor paths through properly separated power and ground arrangements. Use the datasheet pin and electrical information to identify timer-capable pins, and add suitable driver-interface protection for inductive and brushed loads. Avoid routing motor current through MCU board traces or placing high-switching-current paths beneath sensitive control circuitry.
추천
Data Acquisition and Logging
The Motorola MC9S08RE16CFJ can serve as a compact data-acquisition front end for industrial counters, status records, and periodic sensor logging. Its 8-bit S08/HC08 core is suited to sequential sampling, filtering, threshold evaluation, and nonvolatile parameter storage, with 16 KB of flash available for application code and configuration. The 32-LQFP 7 x 7 mm package enables compact controller boards with straightforward assembly and inspection. Confirm whether the selected configuration includes the required ADC and communications resources, and account for flash write endurance when logging frequently changing values. Use buffered inputs and appropriately decoupled supply connections to protect measurement accuracy and signal integrity.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08RE16CFJ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08RE16FJ |
|---|---|---|
| Package | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) |
| Brand | Motorola | Motorola |
| Product Family | MC9S08RE16 | MC9S08RE16 |
| CPU Core | 8-bit HC08/S08 | 8-bit HC08/S08 |
| Maximum CPU Frequency | 8 MHz | 8 MHz |
| Flash Memory | 16 KB (16K x 8) | 16 KB |
주요 차별점
- Identified industrial S08 control option (vs MC9S08RE16FJ)
- Compact 32-lead package (vs MC9S08RE16FJ)
- No functional replacement risk within the verified candidate set (vs MC9S08RE16CFDE)
설계 노트
Create the 32-LQFP footprint from the manufacturer package drawing rather than scaling a generic 7 x 7 mm pad pattern. Confirm pin-one orientation, lead width, pitch, toe length, and solder-mask clearance against the land-pattern dimensions. The MC9S08RE16CFJ has 32 gull-wing leads on a compact footprint, so paste-volume control and adequate side clearance are important for reliable reflow. Include pin-one marking and silkscreen orientation on the assembled board.
Place the MCU supply decoupling capacitor immediately adjacent to its supply and ground pins, and provide a short return path that avoids switching-node currents. Select the capacitor value and voltage rating using the supply requirements, ESR needs, and layout recommendations in the MC9S08RE16 datasheet. Verify the exact device configuration's minimum and maximum supply voltage before designing the regulator or protection network; those limits were not established by the product listing.
Do not treat every MC9S08RE16 ordering suffix as automatically interchangeable. Confirm the package, temperature grade, qualification status, clock configuration, and device identifier for MC9S08RE16CFJ against the intended application. MC9S08RE16FJ is the closest identified LQFP candidate, but production substitution should still follow a manufacturer-supported comparison and firmware regression check. A same-family name is not a substitute for verified pin and electrical compatibility.
Group communication, timer, and sensor inputs according to their signal-integrity requirements, and keep switching or inductive-control traces away from MCU pins used for sensing. Provide a continuous ground reference beneath the device where the package drawing permits, while avoiding accidental current loops between analog returns and high-current loads. Review oscillator, reset, and debug connections in the manufacturer reference design before releasing a new PCB.
규정 준수 정보
The product is identified as industrial grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for MC9S08RE16CFJ.