MC9S08RG60CFGE - 8-Bit 8MHz 60KB MCU | NXP | Embedded Control
부품 번호: MC9S08RG60CFGE ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC9S08RG60CFGE 개요
A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and input/output functions into one package. In the hierarchy of electronic components, this MCU belongs to the embedded-controller family and provides higher integration than discrete logic. The S08 architecture is intended for compact control systems in which software, flash-resident firmware, timers, communication interfaces, and mixed-signal control functions are required in one device.
The key verified specifications are the 8-bit architecture, 8 MHz operating frequency, 60 KB Flash memory, and 2 KB RAM. The 60 KB Flash capacity supports substantially larger firmware than the 2 KB RAM working area, while the 44-LQFP package provides 44 external leads for PCB-level connectivity. The NXP data-sheet family also identifies a 2-channel, 16-bit timer/PWM module with selectable input capture, output compare, and edge-aligned or center-aligned PWM capability.
This device is suitable for industrial control, appliance control, instrumentation, motor and power-system control, and compact embedded products. The S08 platform can execute control firmware from Flash while using RAM for working variables, stack operations, and intermediate data. Designers should verify the complete pinout, electrical limits, clock configuration, peripheral availability, memory map, and package details against the manufacturer data sheet before finalizing a PCB or production design.
A key design consideration is that an 8 MHz MCU is appropriate for control-loop and supervisory tasks where deterministic peripheral timing and low-cost embedded integration matter more than high-throughput computation. Because the verified data does not provide a complete electrical timing table, supply limits, temperature range, or detailed peripheral inventory, those values must be confirmed from the official NXP data sheet rather than inferred from distributor summaries. The 44-LQFP footprint also requires careful land-pattern, solder, and thermal-management review.
This page combines the verified distributor specifications, the official NXP data-sheet link, application-oriented engineering context, and a transparent record of unavailable technical details. It is intended to help engineers identify the correct MCU category, compare it with other S08 devices, locate the manufacturer documentation, and plan an evidence-based sourcing and design review rather than treating incomplete distributor snippets as a complete electrical specification set.
드롭인 대체품: MC9S08RG60CFGE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S08RG60CFGE (동일 폼 팩터 및 풋프린트) — 차이점: Instruction Set, Package, Program Memory Size, RAM Size.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S08RG60CFGE
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S08RG60CFGE
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S08RG60CFJE
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.5 / 개
데이터시트 보기 →MC9S08RG60CFGER
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MC9S08RG60CFGE
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S08RG60CFGE 최대 정격 & 전기적 특성
| Architecture | 8-bit |
| Operating Frequency | 8 MHz |
| Flash Memory | 60 KB |
| Flash Organization | 60K x 8 bits |
| RAM | 2 KB |
| Series | S08 |
| Microcontroller Type | 8-bit embedded microcontroller |
| 패키지 | 44-LQFP (10 x 10 mm) |
| 실장 유형 | Surface mount |
| Timer/PWM Module | 2-channel, 16-bit TPM1 |
| TPM Counter Modes | Free-running, modulo, and up/down counter |
| PWM Capability | Edge-aligned or center-aligned PWM |
| Input Capture | Selectable |
| Output Compare | Selectable |
| System Protection | System protection features listed in the NXP datasheet family |
MC9S08RG60CFGE 44-lqfp (10 x 10 mm) 핀 구성 가이드
MC9S08RG60CFGE(44-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08RG60CFGE.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08RG60CFGE 적합 용도: 7 애플리케이션s: Industrial Control, Motor and PWM Control, Appliance Control, Instrumentation and Data Acquisition, Power-System Sequencing, Communication Interface Equipment, HMI and Panel Control.
Industrial Control
The MC9S08RG60CFGE fits compact industrial-control logic where an 8-bit MCU must coordinate sensors, actuators, timers, and supervisory firmware. Its verified 8 MHz S08 core supports deterministic embedded-control tasks, while 60 KB of Flash provides room for application code and 2 KB of RAM supports working variables and interrupt handling. The 44-LQFP package exposes external connectivity for mixed control boards. Designers should confirm voltage limits, I/O ratings, protection requirements, and timing margins against the NXP data sheet before deploying the device in factory equipment.
추천
Motor and PWM Control
The verified 2-channel, 16-bit TPM1 timer/PWM module makes MC9S08RG60CFGE relevant to small motor, valve, and power-sequencing systems. Edge-aligned or center-aligned PWM modes can support actuator drive, while selectable input capture and output compare can help measure timing or events. The 8 MHz operating frequency and 60 KB Flash are appropriate for control firmware, but motor current, voltage, switching safety, and feedback requirements are application-specific. Confirm external driver selection, protection components, pin multiplexing, and electrical limits before connecting a motor.
추천
Appliance Control
MC9S08RG60CFGE is suitable for appliance-control boards that require persistent firmware, configurable timing, and a compact surface-mount controller. The 60 KB Flash capacity is useful for state-machine logic, user-interface handling, and safety-oriented routines, while the 2 KB RAM supports local buffering and stack requirements. The 44-LQFP package is useful when the design requires numerous board connections without moving to a larger package. Validate relay, heater, and motor interfaces, reset behavior, brownout behavior, and production test requirements against the official data sheet.
추천
Instrumentation and Data Acquisition
The MC9S08RG60CFGE can serve as a supervisory controller in instrumentation products where a low-cost 8-bit MCU handles measurement sequencing, data formatting, and control-panel logic. Its 8 MHz operation provides a defined processor basis for firmware, and the TPM timer resources can support periodic sampling or output timing. The verified data does not specify ADC, communication, or analog peripheral availability, so these functions must be checked in the NXP data sheet. External converters and interface protection may be required depending on the measurement chain.
추천
Power-System Sequencing
MC9S08RG60CFGE can be evaluated for power-system sequencing and supervisory control where firmware must coordinate enables, timing events, and status reporting. The verified TPM1 timer capabilities provide selectable counter and PWM functions that may support deterministic sequencing or monitoring. The device does not automatically provide a complete power-conversion solution, so gate-drive, sensing, fault handling, and high-voltage isolation remain external design responsibilities. Confirm supply range, reset behavior, brownout handling, and I/O electrical ratings before using it near power electronics.
추천
Communication Interface Equipment
The MC9S08RG60CFGE may be used in compact communication-interface equipment as a supervisory or protocol-support controller when the application can fit within 60 KB Flash and 2 KB RAM. The 8-bit architecture is well suited to simple framing, status management, and low-speed control functions rather than high-throughput packet processing. The verified data does not confirm a particular UART, SPI, CAN, or USB peripheral, so protocol capability must be checked in the manufacturer data sheet. External transceivers and protection circuits may also be required.
추천
HMI and Panel Control
MC9S08RG60CFGE can support compact human-machine interface boards when the firmware handles keypad scanning, display sequencing, indicator control, and local parameter management. The 60 KB Flash area provides space for menu logic and control tables, while the 44-LQFP package offers a relatively high pin count for panel connectivity. Display drivers, touch sensing, and communication transceivers are not established by the supplied snippets and must be verified. Check timing, I/O levels, ESD protection, and power sequencing for the target human-interface board.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08RG60CFGE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08RG60CFGE | MC9S08RG60 | MC9S08RG60CFGER |
|---|---|---|---|---|
| Package | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) - same target | 44-LQFP (10 x 10 mm) - family variant | 44-LQFP (10 x 10 mm) - suffix variant |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Architecture | 8-bit | 8-bit | 8-bit S08 family | 8-bit S08 family |
| Operating Frequency | 8 MHz | 8 MHz | 8 MHz family context | 8 MHz family context |
| Flash Memory | 60 KB | 60 KB | 60 KB family context | 60 KB family context |
| RAM | 2 KB | 2 KB | 2 KB family context | 2 KB family context |
| Timer/PWM | 2-channel, 16-bit TPM1 | 2-channel, 16-bit TPM1 | 2-channel, 16-bit TPM1 family context | 2-channel, 16-bit TPM1 family context |
주요 차별점
- Integrated Flash capacity (vs MC9S08FL8CLC)
- Timer/PWM integration (vs MC9S08AW32CPUE)
- Verified package identity (vs MC9S08FL8CLC)
설계 노트
Use the official NXP 44-LQFP package drawing and land pattern rather than reconstructing the footprint from the distributor description. Confirm lead pitch, pad length, solderable area, and assembly tolerances on the PCB. Because the package has 44 leads, verify every assigned signal against the complete datasheet pin table and check for adjacent power or interface pins that require short, low-impedance routing.
Do not treat the 8-bit processor frequency, memory capacities, or TPM feature description as a complete electrical specification. Supply voltage, I/O ratings, reset thresholds, clock startup, watchdog behavior, and temperature limits are not included in the verified snippets. Confirm those parameters in the official MC9S08RG60 data sheet before programming a new board or releasing production firmware.
Place the MCU supply decoupling exactly where the data sheet's reference circuit recommends and keep the supply loop small. External sensors, communication transceivers, and actuators can create large transient demands, so separate or isolate their return paths where practical. Actual capacitor values and transient limits require the official electrical specifications; the verified search data does not provide enough information to calculate a qualified power budget.
For timer-driven PWM, communication, or external control signals, preserve the datasheet pin mux and timing requirements. Route sensitive inputs away from switching nodes and high-current actuator traces, and use appropriate grounding and protection. The verified data confirms TPM1 capabilities but does not establish pin mapping, rise/fall times, or analog noise specifications, so these items must be checked in the manufacturer documentation.
규정 준수 정보
The verified web results do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for MC9S08RG60CFGE. Obtain current documentation from NXP or an authorized distributor before making compliance claims.
