MCP3302-CI/P - 13-Bit Differential ADC | Microchip Technology
부품 번호: MCP3302-CI/P ✓ 활성MCP3302-CI/P 개요
An ADC converts an analog voltage into a digital value for processing, measurement, or storage. The MCP3302 belongs to the ADC hierarchy, where a successive-approximation register compares the unknown input against internally generated reference voltages until the converted code is available. Its differential architecture supports measurement of voltage differences between input pairs, which can improve common-mode rejection when the source is carefully interfaced and the analog front end is designed accordingly.
Key features include a 13-bit conversion resolution, two differential ADC channels, four input connections, full differential inputs, and an SPI-compatible serial interface. The SPI interface is suitable for connecting the converter to a microcontroller or other digital controller while transferring conversion results over a compact serial link. The low-power operating characteristics are particularly relevant for remote and battery-powered installations where reducing energy use can extend operating time.
Technically, the MCP3302 uses a successive-approximation conversion architecture and offers a two-channel differential ADC. Microchip positions the device for low-power, small-package implementations where the complete measurement chain must communicate with a host processor. Because the MCP3302-CI/P is supplied in a 14-pin PDIP package, it is more appropriate for through-hole assembly and legacy-style PCB layouts than for space-constrained surface-mount designs.
Typical applications include battery-powered environmental monitors, remote sensor acquisition nodes, industrial process measurement, laboratory instrumentation, and embedded control systems. The differential inputs can support bridge or ratiometric sensing when paired with suitable input conditioning, while SPI permits straightforward connection to a host microcontroller.
Designers should verify the reference voltage, analog input range, sampling rate, digital interface timing, and acquisition method against the manufacturer datasheet before finalizing signal-chain and firmware requirements. Reference routing, source impedance, grounding, and differential pairing are as important as the converter itself when achieving repeatable measurements.
드롭인 대체품: MCP3302-CI/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MCP3302-CI/P 최대 정격 & 전기적 특성
| 분해능 | 13 bit |
| ADC Architecture | 1 SAR (successive-approximation converter) |
| ADC Channels | 2 channels |
| Input Connections | 4 inputs |
| Input Type | Full differential input |
| Digital Interface | SPI serial interface |
| 패키지 | 14-pin PDIP |
| 실장 유형 | Through-hole |
| Power Consumption | Low power consumption |
| Battery-Powered Operation | Supported application |
| Remote Data Acquisition | Supported application |
| Differential Input | Full differential |
MCP3302-CI/P 14-pin pdip 핀 구성 가이드
MCP3302-CI/P(14-pin pdip 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCP3302-CI/P.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCP3302-CI/P 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Node, Remote Environmental Monitoring, Industrial Process Measurement, Laboratory Instrumentation, Precision Feedback Control, Portable Data Logger.
Battery-Powered Sensor Node
The MCP3302-CI/P fits a battery-powered sensor node that must capture one or two analog measurements and transfer the results through a compact serial interface. Its 13-bit resolution provides 4,096 possible digital codes, while the two differential channels can monitor paired sensor outputs. According to Microchip's product information, the converter is specifically suited to low-power and battery-powered systems. Place the ADC near the protected sensor analog section, reference it from a suitable low-impedance source, and connect SPI to the host controller. Actual battery life depends on conversion frequency, standby behavior, reference current, and the rest of the node electronics.
추천
Remote Environmental Monitoring
The MCP3302-CI/P can serve as the measurement converter in a remote environmental-monitoring station that combines temperature, pressure, or level sensors with a telemetry link. Its two differential ADC channels are suited to conditioning systems that present paired differential signals, and its SPI interface enables compact connection to an embedded controller. According to Microchip's manufacturer page, remote data acquisition is an intended application for the MCP3302. Keep the analog traces short, use a stable reference, and account for sensor excitation and grounding. The converter's 13-bit result should be checked against the required measurement resolution and calibration error of the complete instrument.
추천
Industrial Process Measurement
The MCP3302-CI/P is applicable to industrial process-measurement equipment that converts low-level differential sensor outputs for a programmable controller. Two differential channels and 13-bit conversion resolution provide a practical combination for pressure, load, or temperature front ends. According to the Microchip product page, the ADC supports full differential inputs and low power consumption. Differential routing helps reject common-mode disturbances when both signal lines are treated consistently from source to converter. The application still requires protection, isolation, filtering, and calibration appropriate to the industrial environment; those parameters are not specified in the supplied data and must be established independently.
추천
Laboratory Instrumentation
The MCP3302-CI/P can form the input stage of laboratory instrumentation that measures two differential voltages and transfers conversion results to a digital control system. Its 13-bit resolution, 1-SAR architecture, and SPI output provide a straightforward acquisition path. According to the Microchip manufacturer documentation, the MCP3302 is a low-power differential-input ADC intended for compact measurement systems. For laboratory use, evaluate the reference source, analog bandwidth, settling time, acquisition timing, and calibration method against the required measurement accuracy. The verified data does not provide sample rate, reference requirements, or input-range limits, so those values must be obtained from the manufacturer datasheet before final circuit design.
추천
Precision Feedback Control
The MCP3302-CI/P can be used in a feedback-control system where a controller compares a differential sensor signal and updates the actuator through a digital control loop. The two-channel SAR architecture permits periodic measurements, while SPI provides an efficient connection to a microcontroller or digital controller. According to the Microchip product page, the converter combines full differential inputs with low power consumption. Care is required because acquisition latency, reference variation, and analog filtering can affect loop stability. The host firmware should follow the documented conversion sequence and timing, and the complete system should be validated for sensor noise, actuator response, and the required control update rate.
추천
Portable Data Logger
The MCP3302-CI/P is appropriate for a portable data logger that records two differential analog channels and periodically stores results through a serial host interface. Its low-power emphasis and 14-pin PDIP package support through-hole, compact instrument construction. According to the verified Microchip and distributor information, the part is a 13-bit, 2-channel differential ADC using SPI. A practical implementation should trigger conversions at a controlled rate, buffer results, and synchronize writes with the measurement cycle. The memory device and controller must accommodate the required sample volume, while the power system should distinguish short acquisition bursts from long idle periods to maximize battery life.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCP3302-CI/P — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 14-pin PDIP |
| Brand | Microchip Technology |
| Resolution | 13 bit |
| ADC Architecture | 1 SAR |
| ADC Channels | 2 channels |
| Input Connections | 4 inputs |
| Input Type | Full differential input |
| Digital Interface | SPI serial interface |
| Power Consumption | Low power consumption |
| Primary Applications | Battery-powered systems and remote data acquisition |
주요 차별점
- Differential measurement capability (vs Generic single-ended 13-bit ADC)
- Compact serial data transfer (vs Generic parallel-output 13-bit ADC)
- Low-power system orientation (vs Higher-power general-purpose ADC)
- Purpose-built remote acquisition (vs Generic laboratory ADC)
설계 노트
Route the two differential inputs as a matched pair and keep them away from digital switching signals and the SPI clock. The verified data confirms full differential inputs but does not specify the complete analog network, so obtain the manufacturer’s recommended reference, input, and bypass connections from the datasheet. Preserve a continuous ground reference beneath the analog section, minimize loop area, and place input and reference decoupling close to their associated pins.
Do not infer sample rate, input range, reference voltage, or acquisition timing from the 13-bit resolution alone. The MCP3302-CI/P is identified as a 1-SAR converter, but SAR performance depends on reference accuracy, source impedance, conversion timing, and the digital command sequence. Confirm those values in the manufacturer datasheet and implement the exact SPI clocking and sample timing required by the device.
The device is explicitly described as low power and intended for battery-powered systems, so include the MCP3302 in the complete power-budget calculation rather than treating it as an isolated component. Account for the reference circuit, external signal conditioning, pull resistors, and controller activity. For remote nodes, duty-cycle sampling and keeping the processor asleep between acquisitions may produce a larger battery-life benefit than optimizing only the converter itself.
The MCP3302-CI/P is a 14-pin through-hole PDIP device. Before layout release, verify the official mechanical drawing, row spacing, pin numbering, and pin-1 orientation against the selected manufacturer package variant. A through-hole footprint is convenient for prototyping and repair, but it is not interchangeable with a surface-mount or dual-inline package having different lead spacing. Do not approve a substitute footprint until its dimensions and pin assignment have been checked.
규정 준수 정보
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the MCP3302-CI/P is a general-purpose analog-to-digital converter.