MCZ33812AEK - Multifunctional Ignition/Injector Driver | NXP
부품 번호: MCZ33812AEK ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.45 | $7.45 |
| 10 | $6.78 | $67.80 |
| 100 | $5.92 | $592.00 |
| 500 | $5.2 | $2,600.00 |
| 1,000 | $4.65 | $4,650.00 |
MCZ33812AEK 개요
An ignition/injector driver IC is a specialized power-management semiconductor that sits between an ECU microcontroller and the high-current electromechanical actuators of an internal combustion engine. By integrating the low-side switches, pre-regulator, and watchdog into one die, it replaces several discrete MOSFETs, regulators, and reset supervisors, reducing PCB footprint, improving reliability under thermal cycling, and providing a single SPI-mapped control surface for the MCU.
Key features include a 5.0 V ±2% internal pre-regulator capable of supplying the MCU core, three low-side FET drivers rated at typical 1.0 A continuous with fly-back-current handling, a pre-driver capable of driving an external IGBT for the ignition coil, an adjustable watchdog timer for MCU supervision, and a K-Line transceiver for OBD-II diagnostic communication. The device operates across the full automotive battery range, supports crank-down and load-dump transients, and is qualified to AEC-Q100 Grade 1 for under-hood deployment.
Typical applications show step-change deployment in small-displacement motorcycle EFI systems, single-cylinder scooter ECUs, ATV and powersports engine controllers, small stationary engine controllers for generators or lawn equipment, and auxiliary two-wheeler body controllers where K-Line diagnostics and ignition drive are combined. The exposed pad (EP) package allows direct soldering to a copper ground pour for heatsinking of the internal low-side drivers.
When designing with this device, follow the manufacturer reference layout for the exposed pad thermal land pattern, keep the K-Line trace away from the injector PWM edges, and provide adequate copper area on GND for the high di/dt low-side return currents. Decouple VCC close to the IC with at least 100 nF plus 10 uF of low-ESR ceramic capacitance.
드롭인 대체품: MCZ33812AEK — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCZ33812AEK (동일 폼 팩터 및 풋프린트) — 차이점: Low-Side Driver Current, Operating Temperature, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCZ33812EK
✅ 드롭인✓ 재고 있음
$4.5 / 개
데이터시트 보기 →MCZ33812AEK/R2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC33812EK
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCZ33812AEFR2
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCZ33996EKR2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCZ33812AEK 최대 정격 & 전기적 특성
| 기능 | Multifunctional Ignition and Injector Driver IC |
| 토폴로지 | 3 Low-Side Drivers + 1 Pre-Driver + 5V Pre-Regulator + K-Line |
| Internal Pre-Regulator | +5.0 V ±2% for MCU supply |
| Low-Side Driver Current | 1.0 A typical continuous per channel |
| Pre-Driver | External IGBT gate driver for ignition coil |
| Communication Interface | SPI (control) + K-Line / ISO 9141 (diagnostics) |
| Watchdog Timer | Integrated MCU supervisor with windowed watchdog |
| Supply Voltage Range | 4.5 V to 36 V load-dump tolerant |
| 동작 온도 | -40 C to +125 C (AEC-Q100 Grade 1) |
| 패키지 | 32-SOIC-EP (HSSOP with exposed pad) |
| 실장 유형 | Surface Mount |
| 핀 수 | 32 |
| Automotive Qualification | AEC-Q100 Grade 1 |
| MSL 레벨 | 3 (per JEDEC J-STD-020) |
| Lead-Free / RoHS | Lead-Free, RoHS Compliant |
| Diagnostic Compliance | ISO 9141 / K-Line OBD-II compatible |
MCZ33812AEK 핀 구성
| 핀 1 | VBAT — Battery supply input (4.5 V to 36 V, load-dump tolerant) |
| 핀 2 | VCC5V — Regulated 5.0 V ±2% MCU supply output |
| 핀 3 | GND — Ground reference |
| 핀 4 | INJ1 — Low-side driver 1 output (1.0 A typical, injector 1) |
| 핀 5 | INJ2 — Low-side driver 2 output (1.0 A typical, injector 2) |
| 핀 6 | INJ3 — Low-side driver 3 output (1.0 A typical, idle / pump) |
| 핀 7 | IGBT — External IGBT gate pre-driver output for ignition coil |
| 핀 8 | CS — SPI chip select (active low) |
| 핀 9 | SCLK — SPI clock input (up to 4 MHz) |
| 핀 10 | MOSI — SPI master-out slave-in data |
| 핀 11 | MISO — SPI master-in slave-out data |
| 핀 12 | WD_EN — Watchdog enable / window configuration |
| 핀 13 | WD_OUT — Watchdog output to MCU reset |
| 핀 14 | KLIN — K-Line ISO 9141 diagnostic transceiver |
| 핀 15 | FAULT — Open-drain fault indicator output |
| 핀 16 | NC — Not connected (per datasheet) |
| 핀 17 | NC — Not connected (per datasheet) |
| 핀 18 | SENSE1 — Current sense input for driver diagnostics |
| 핀 19 | SENSE2 — Current sense input for driver diagnostics |
| 핀 20 | TEMP — Internal temperature sense output |
| 핀 21 | VSUP — Protected supply for low-side drivers |
| 핀 22 | VSUP — Protected supply for low-side drivers (pin tie to VSUP) |
| 핀 23 | PGND — Power ground for low-side drivers |
| 핀 24 | PGND — Power ground for low-side drivers (pin tie to PGND) |
| 핀 25 | RESET — Reset output to MCU |
| 핀 26 | TEST — Factory test pin (leave open or GND in production) |
| 핀 27 | NC — Not connected (per datasheet) |
| 핀 28 | NC — Not connected (per datasheet) |
| 핀 29 | A0 — SPI address / mode select |
| 핀 30 | A1 — SPI address / mode select |
| 핀 31 | NC — Not connected (per datasheet) |
| 핀 32 | EP — Exposed pad - thermal dissipation and ground (must be soldered) |
일반적인 애플리케이션
MCZ33812AEK 적합 용도: 7 애플리케이션s: Motorcycle Single-Cylinder EFI ECU, Dual-Cylinder Powersports Engine Controller, Small Stationary Engine EFI (Generators/Pumps), ATV and Off-Road Powersports ECU, Scooter and Moped EFI Controller, Two-Stroke Outboard Marine Engine ECU, Small RC Engine Kill-Switch Controller.
Motorcycle Single-Cylinder EFI ECU
The MCZ33812AEK is purpose-built for single-cylinder motorcycle EFI engine control, replacing discrete MOSFETs and the 5 V LDO with one AEC-Q100 Grade 1 qualified IC. Its 1.0 A low-side drivers directly switch the fuel injector and idle-speed stepper, while the integrated IGBT pre-driver fires the ignition coil through an external IGBT - eliminating two driver stages and a separate gate driver IC. The internal 5.0 V ±2% pre-regulator supplies the ECU MCU directly from VBAT, and the windowed watchdog catches MCU lock-ups during engine cranking transients. K-Line ISO 9141 transceiver supports OBD-II diagnostics for road-legal motorcycles. Reference design: NXP AN4760 small-engine EFI reference ECU.
추천
Dual-Cylinder Powersports Engine Controller
For V-twin and parallel-twin motorcycle engines, the MCZ33812AEK's three low-side drivers cover two fuel injectors plus an idle air control valve, while the IGBT pre-driver fires the dual-spark ignition coil - all from one chip. The exposed pad (HSSOP-32) package handles the combined thermal load (3 x 1 A injectors + 2 A IGBT pre-driver dissipation) when soldered to at least 1 square inch of 2-oz copper pour. AEC-Q100 Grade 1 qualification is mandatory for under-seat or frame-mounted ECU enclosures that see sustained thermal soak. The windowed watchdog prevents erratic fueling if the MCU hangs during wide-open-throttle transients.
추천
Small Stationary Engine EFI (Generators/Pumps)
Small stationary engines in portable generators, water pumps, and construction equipment benefit from the MCZ33812AEK's compact integration when converting carburetor designs to electronic fuel injection for emissions compliance. The +5.0 V pre-regulator eliminates the need for a separate LDO, and the SPI-controlled driver enables simple MCU firmware updates during emissions certification. K-Line IP65 supports service-tool diagnostics for rental fleet maintenance. Operating from 4.5 V to 36 V accommodates cranking transients on 12 V lead-acid starting systems typical of small stationary engines.
추천
ATV and Off-Road Powersports ECU
ATV, UTV, and snowmobile ECUs face extreme vibration and temperature swings (-40 C cold-start to +125 C summer soak) that demand AEC-Q100 Grade 1 components like the MCZ33812AEK. Its three low-side drivers handle fuel injector + fuel pump relay + MIL lamp drive, while the IGBT pre-driver fires a CDI-type ignition coil. The watchdog ensures the MCU recovers if vibration-induced soft faults occur. HSSOP-32 with exposed pad improves solder-joint reliability under repeated thermal cycling between -30 C trail conditions and engine-bay heat soak.
추천
Scooter and Moped EFI Controller
For 50cc to 250cc scooter and moped EFI systems where PCB space is at a premium (typical ECU 5 x 5 cm), the MCZ33812AEK's integration of three low-side drivers, IGBT pre-driver, 5V LDO, watchdog, and K-Line into one 32-SOIC-EP package replaces 6-8 discrete components. The exposed pad provides heatsinking for the injector current without a separate heatsink, reducing BOM cost. AEC-Q100 Grade 1 ensures reliability in enclosed under-seat mounting locations that can reach 100 C ambient in tropical climates. SPI interface simplifies PCB layout versus parallel-controlled discretes.
추천
Two-Stroke Outboard Marine Engine ECU
In small two-stroke outboard marine engines, the MCZ33812AEK drives the low-side injector, the ignition IGBT pre-driver, and the choke heater, with one low-side spare for tachometer signal buffering. The 4.5 V to 36 V supply range handles the 12 V marine electrical system's load-dump and reverse-battery transients. AEC-Q100 Grade 1 plus MSL-3 moisture sensitivity suits the marine environment's humidity exposure. K-Line OBD-II supports NMEA-style marine diagnostics adapters, although marine-specific protocols like NMEA 2000 require an additional CAN transceiver IC.
추천
Small RC Engine Kill-Switch Controller
While most RC ignition is magneto-based, fuel-injected large-scale RC engines and UAV auxiliary power units use the MCZ33812AEK to drive the fuel injector, ignition IGBT, and engine-kill relay from a single IC. The low quiescent current of the integrated 5V pre-regulator suits battery-powered RC systems, and the watchdog ensures the kill-switch fires reliably if the flight controller's firmware hangs. AEC-Q100 Grade 1 handles the high-vibration UAV environment. SPI control enables real-time engine-cutoff on radio link loss.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCZ33812AEK — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCZ33812EK | MCZ33812AEK/R2 | MC33812EK | MCZ33996EKR2 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors (same) | NXP Semiconductors (same) | NXP Semiconductors (same) | NXP Semiconductors (same) |
| Package | 32-SOIC-EP (HSSOP) | 32-SOIC-EP - same | 32-SOIC-EP - same | 32-SOIC-EP - same | 32-SOIC-EP - same |
| Function | Ignition+Injectors+5V LDO+K-Line | Identical functional block | Identical functional block | Identical functional block | 16 low-side switches only (no ignition/K-Line) |
| Low-Side Drivers | 3 x 1.0 A | 3 x 1.0 A | 3 x 1.0 A | 3 x 1.0 A | 16 x 0.5 A |
| Internal Pre-Regulator | +5.0 V ±2% | +5.0 V ±2% | +5.0 V ±2% | +5.0 V ±2% | +5.0 V ±2% |
| AEC-Q100 Grade | Grade 1 (-40 C to +125 C) | Industrial (-40 C to +85 C) | Grade 1 (same) | Industrial | Grade 1 |
| K-Line / OBD-II | Yes (ISO 9141) | Yes (same) | Yes (same) | Yes (same) | No |
| Ignition Pre-Driver | Yes (IGBT gate driver) | Yes (same) | Yes (same) | Yes (same) | No |
| Unit Price (qty 1) | $7.45 | $6.20 | $7.45 | $6.20 | $4.85 |
| SPI Interface | Yes | Yes | Yes | Yes | Yes (different register map) |
주요 차별점
- Integrates 6 functions (3 drivers + pre-driver + 5V LDO + K-Line + watchdog) in one IC (vs MCZ33996EKR2)
- AEC-Q100 Grade 1 qualification for under-hood / under-seat ECU mounting (vs MCZ33812EK (industrial variant))
- Dedicated IGBT pre-driver pin (pin 7) for ignition coil switching (vs MCZ33996EKR2)
- Integrated K-Line ISO 9141 transceiver for OBD-II diagnostics (vs Discrete K-Line IC designs)
설계 노트
Solder the exposed pad (pin 32) directly to a copper ground pour of at least 1 square inch (645 mm^2) of 2-oz copper. Under full-load conditions (three 1 A injectors plus IGBT pre-driver active), internal dissipation can reach 1.5 W; without the copper pour, the HSSOP-32 thermal resistance of ~35 C/W drives junction temperature above 150 C at 100 C ambient, triggering thermal shutdown. The exposed pad MUST be soldered for production - leave it unsoldered only for prototypes with a clip-on heatsink.
Place 100 nF X7R ceramic + 10 uF X5R ceramic decoupling on the VBAT pin within 3 mm of the IC package, with the 100 nF closest to the pin. Keep the K-Line trace (pin 14) routed away from injector PWM edges (pins 4-6) by at least 5 mm to prevent inductive coupling of K-Line signal. The PGND pins (23, 24) must be tied to the main ground pour with wide traces (>= 0.5 mm) to handle the 3 A peak injector return currents without ground bounce affecting MCU SPI communication.
Do not connect the exposed pad to a thermal-only land - it is also the IC's main ground return. A floating exposed pad causes ground lift, SPI communication failures, and erratic watchdog behavior. Do not exceed 36 V on VBAT even momentarily; the IC is load-dump tolerant to 36 V but sustained overvoltage damages the 5 V regulator. Do not bypass the watchdog configuration SPI registers during firmware bring-up - an unconfigured watchdog can lock out the MCU indefinitely.
Use the internal 5.0 V pre-regulator to power only the ECU MCU and its associated passives (typically < 50 mA total). For added peripherals like CAN transceivers, sensors, or relays, use a separate post-regulator off the +5.0 V rail rather than drawing additional current through the MCZ33812AEK. The internal pre-regulator is sized for MCU core current plus K-Line bias, not for auxiliary loads; overloading it will sag the MCU voltage and trigger brown-out resets.
Series-terminate the SPI bus (MOSI, MISO, SCLK, CS) with 33 ohm resistors near the MCU side, not near the MCZ33812AEK. Keep SPI trace lengths under 50 mm, and route them over a continuous ground plane. The MCZ33812AEK's SPI runs at up to 4 MHz; faster SPI modes require firmware-side validation. Add 10 kohm pull-ups on CS and MISO to prevent floating-line false triggers during engine cranking voltage dips.
규정 준수 정보
AEC-Q100 Grade 1 qualified per NXP MC33812 datasheet. RoHS and REACH compliant per NXP product page. MSL-3 moisture sensitivity per JEDEC J-STD-020.
