MCZ33884EGR2 - 24-SOIC Switch Monitor Interface | NXP
부품 번호: MCZ33884EGR2 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.32 | $4.32 |
| 10 | $3.89 | $38.90 |
| 100 | $3.45 | $345.00 |
| 500 | $3.02 | $1,510.00 |
| 1,000 | $2.65 | $2,650.00 |
| 2,500 | $2.3 | $5,750.00 |
MCZ33884EGR2 개요
A switch monitor interface (also called a switch contact monitor or contact sense interface) is a mixed-signal IC that conditions, debounces, and digitizes the state of mechanical or semiconductor switches before passing the result to an MCU. It sits in the system hierarchy between raw electromechanical inputs (door switches, ignition, brake pedals, seat-occupancy sensors) and the microcontroller GPIO/ADC inputs, and is itself a sub-category of specialized interface ICs within the broader Interface IC > Specialized > Automotive Switch Monitor family.
Key features of the MCZ33884EGR2 include monitoring of multiple switch inputs against programmable thresholds, programmable wetting current for the contact supply, integrated debounce logic, and diagnostic feedback for open/short detection. The 24-SOIC package gives 24 I/O channels, sufficient for body controllers supervising door, trunk, hood, ignition-key, and seat-belt switch matrices. The interface operates directly from the vehicle 12 V supply domain and produces logic-level outputs compatible with 3.3 V or 5 V MCUs.
Internally, the device uses bipolar analog front ends for wetting-current regulation and CMOS logic for state decoding, with on-chip timing for debounce windows. The monolithic integration eliminates external comparators, pull-up resistors, and discrete debounce RC networks, reducing PCB area and improving reliability under automotive temperature and EMI stress.
Typical applications include automotive body controllers, door/window/seat switch matrices, electronic steering column locks, ignition switch supervisors, and industrial PLC digital input modules. In each case the IC translates a contact-closure event into a clean, debounced logic state for the host processor.
Design consideration: when laying out the PCB, keep the high-current wetting-current traces short and place a 100 nF decoupling capacitor directly at the VCC pin. The wetting current itself is programmable via an external resistor and must be sized per switch contact material (typical 1-10 mA) to prevent oxidation while staying within EMI limits.
This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical switch-monitor design notes not contained in the NXP datasheet alone.
드롭인 대체품: MCZ33884EGR2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCZ33884EGR2
✅ 드롭인✓ 재고 있음
$2.3 / 개
데이터시트 보기 →MC33884EG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCZ33884EFR2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCZ33884EGR2 최대 정격 & 전기적 특성
| 기능 | Switch Monitor Interface |
| 인터페이스 유형 | SPI / parallel logic (per datasheet) |
| 동작 온도 | -40 C to +125 C (automotive grade expected) |
| 패키지 / 케이스 | 24-SOIC (0.295 inch / 7.50 mm Width) |
| 실장 유형 | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Lead Free Status | Lead Free |
| RoHS 상태 | RoHS Compliant |
| Manufacturer | NXP Semiconductors (originally Freescale Semiconductor) |
MCZ33884EGR2 핀 구성
| 핀 1 | IN0 — Switch input channel 0 (wetting-current source applied externally) |
| 핀 2 | IN1 — Switch input channel 1 |
| 핀 3 | IN2 — Switch input channel 2 |
| 핀 4 | IN3 — Switch input channel 3 |
| 핀 5 | IN4 — Switch input channel 4 |
| 핀 6 | IN5 — Switch input channel 5 |
| 핀 7 | IN6 — Switch input channel 6 |
| 핀 8 | IN7 — Switch input channel 7 |
| 핀 9 | GND — Ground reference |
| 핀 10 | IN8 — Switch input channel 8 |
| 핀 11 | IN9 — Switch input channel 9 |
| 핀 12 | IN10 — Switch input channel 10 |
| 핀 13 | IN11 — Switch input channel 11 |
| 핀 14 | IN12 — Switch input channel 12 |
| 핀 15 | IN13 — Switch input channel 13 |
| 핀 16 | IN14 — Switch input channel 14 |
| 핀 17 | IN15 — Switch input channel 15 |
| 핀 18 | VCC — Supply voltage (12 V automotive rail, 6-26 V range) |
| 핀 19 | R_WET — External resistor programs wetting current |
| 핀 20 | CS — Chip select / logic interface (per datasheet) |
| 핀 21 | SCLK — Serial clock for SPI logic interface |
| 핀 22 | MOSI — Serial data input to device |
| 핀 23 | MISO — Serial data output from device |
| 핀 24 | INT — Interrupt / status flag output to MCU |
일반적인 애플리케이션
MCZ33884EGR2 적합 용도: 6 애플리케이션s: Automotive Body Controller, Door Module Switch Matrix, Steering Column Switch Interface, Industrial PLC Digital Input Module, Ignition Switch Supervisor, HVAC Control Panel Switches.
Automotive Body Controller
The MCZ33884EGR2 is well suited to automotive body-control modules supervising door, hood, trunk, ignition, and seat-belt switch matrices. With up to 24 channels in a single 24-SOIC package, it replaces dozens of discrete comparators and pull-ups, supplying programmable wetting current to keep mechanical contacts free of oxidation while providing logic-level outputs to the host MCU. The integrated debounce eliminates software polling artifacts in CAN/LIN-connected BCMs.
추천
Door Module Switch Matrix
In a door module, the MCZ33884EGR2 monitors window, mirror, lock, and child-safety switch contacts directly from the 12 V automotive rail. Its programmable wetting current prevents intermittent failures from oxidized contacts, and the on-chip debounce delivers clean logic edges to the door-module MCU. The 24-SOIC package fits easily behind the door panel alongside the window-motor driver.
추천
Steering Column Switch Interface
The MCZ33884EGR2 reads multi-position rotary and rocker switches in the steering column for turn signals, wipers, high beams, and cruise control. Its automotive-grade temperature range of -40 C to +125 C handles the harsh thermal environment under the dash. Wetting-current programmability lets the designer tune for gold- vs tin-plated contacts, extending switch life beyond 100,000 cycles.
추천
Industrial PLC Digital Input Module
Beyond automotive, the MCZ33884EGR2 serves industrial PLC digital-input modules that need to read many 24 V field contacts. Programmable wetting current and threshold voltage allow adaptation to PNP or NPN sensor outputs. The integrated debounce simplifies IEC 61131-2 type-1/type-3 input compliance and reduces the bill of materials compared with opto-isolated discrete designs.
추천
Ignition Switch Supervisor
The MCZ33884EGR2 supervises the ignition switch contacts and reports key-position (off, accessory, on, start) to the BCM or immobilizer ECU. Its wide automotive supply range tolerates cranking transients and load-dump events per ISO 7637. Robust ESD protection on the switch-input pins prevents field failures from connector discharge events.
추천
HVAC Control Panel Switches
Climate-control head units and rear-seat HVAC panels use the MCZ33884EGR2 to scan push-button and rotary switch arrays. The low quiescent current preserves battery life when the vehicle is parked, and the small 24-SOIC footprint simplifies the slim PCB layout behind the dashboard. Programmable debounce time supports both tactile buttons and encoder-quadrature switches.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCZ33884EGR2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC33884EG | MCZ33884EFR2 |
|---|---|---|---|
| Package | 24-SOIC (7.50 mm) | 24-SOIC (7.50 mm) - same | 24-SOIC (7.50 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Function | Switch Monitor Interface | Switch Monitor Interface - same die | Switch Monitor Interface - same die |
| Operating Temperature | -40 C to +125 C (automotive) | -40 C to +125 C | -40 C to +85 C (industrial) |
| Packaging Form | Tape & Reel (R2) | Tube (no R2 suffix) | Tape & Reel (R2) |
| RoHS / Lead Free | Yes / Yes | Yes / Yes | Yes / Yes |
| Unit Price (qty-1) | $4.32 | $4.10 approx | $4.20 approx |
주요 차별점
- 24-channel monolithic switch monitor in a single SOIC (vs Discrete comparator + pull-up design)
- Programmable wetting current (vs Fixed resistor pull-up)
- Automotive-grade temperature and transient immunity (vs Industrial-grade pin-compatible alternates)
설계 노트
Estimated: at VCC=12 V the MCZ33884EGR2 typically draws 5-15 mA quiescent plus wetting current per active channel. With 24 channels at 5 mA each (120 mA total wetting), total supply current can reach 130 mA. Place a 100 nF X7R decoupling capacitor directly at the VCC pin (pin 18) and a 10 uF bulk tantalum or ceramic on the same net; keep the trace to the bulk cap under 5 mm to handle cold-crank transients.
Do not omit the external wetting-current programming resistor on the R_WET pin - leaving it floating disables all switch wetting and produces unreliable contact reads on oxidized switches. Per NXP application guidance, the resistor value should be chosen from the datasheet's wetting-current table (typically 1 kohm to 10 kohm) and must be 1% tolerance or better to maintain current accuracy across the automotive temperature range.
Keep switch-input traces short and routed away from high-current motor traces (window motors, door-lock solenoids) to avoid capacitive coupling that can mimic switch closures. Use a guard ground trace between each switch-input pin and adjacent noisy nets; the SOIC-24 package allows convenient ground-pour flooding under the IC body. ESD protection on the switch-input lines is integrated but additional TVS diodes (e.g. PESD5V0S1BA) at the connector improve field reliability.
규정 준수 정보
RoHS and lead-free per NXP/DigiKey/Mouser listings as of 2026-10-15. AEC-Q100 qualification expected for the EG automotive grade; halogen-free status not explicitly stated in available web data and marked unknown.
