MK66FN2M0VLQ18 - 180MHz Cortex-M4F 2MB MCU | NXP
부품 번호: MK66FN2M0VLQ18 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MK66FN2M0VLQ18 개요
A microcontroller is a programmable embedded controller that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as communications ports, timers, analog converters, and digital I/O on one chip. The ARM Cortex-M4F core includes single-precision floating-point instructions for efficient control calculations, while large on-chip memories reduce external bus traffic and system complexity. This places the device in the 32-bit MCU, embedded processor, and industrial control hierarchy.
The principal features include a 180 MHz maximum core frequency, 2 MB flash organized as 2M x 8, 256 KB SRAM, and both full-speed and high-speed USB support identified by the verified Kinetis K66 data. The integrated connectivity also includes Ethernet support. These interfaces enable a single controller to manage communications, real-time control loops, data acquisition, and user-facing functions without requiring several discrete interface devices.
The Kinetis K66 architecture targets applications requiring large memory densities and low-power processing. Its Cortex-M4F core can accelerate digital filtering, motor-control mathematics, and general numeric workloads, while on-chip SRAM provides working memory for networking stacks and buffering. Exact cache, floating-point pipeline, power-state, and peripheral timing details should be confirmed in the NXP manufacturer datasheet before final qualification.
Typical uses include industrial Ethernet controllers, USB-connected data acquisition, building and automation controllers, motor-control systems, and complex human-machine-interface equipment. The two USB controllers can support different device roles or peripheral functions, while Ethernet is useful for connected control platforms. These applications benefit from local program storage, fast deterministic execution, and a broad set of integrated interfaces.
Design planning should include package-specific PCB layout, correct decoupling, clock configuration, boot-strapping, and firmware support for the selected USB mode. High-speed USB may require additional PLL and signal-integrity implementation, as noted in NXP community guidance. Engineers should also verify the complete pin mapping and peripheral instance availability against the manufacturer documentation before schematic capture.
This page combines verified manufacturer and distributor facts with application guidance, selection trade-offs, and engineering-focused comparisons. It identifies the K66’s memory, core-frequency, USB, Ethernet, and package advantages without implying that differently packaged or architecturally incompatible devices are drop-in replacements.
드롭인 대체품: MK66FN2M0VLQ18 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MK66FN2M0VLQ18 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Ethernet, USB, Mounting Type, SRAM.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MK60FN1M0VLQ12
✅ 드롭인✓ 재고 있음
$9.95 / 개
데이터시트 보기 →MK64FN1M0VLQ12
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$9.74 / 개
데이터시트 보기 →MK60FN1M0VMD12
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$11.2 / 개
데이터시트 보기 →MK66FN2M0VLQ18 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Series | Kinetis K66 |
| Maximum Core Frequency | 180 MHz |
| Flash Memory | 2 MB (2M x 8) |
| SRAM | 256 KB |
| CPU Core | ARM Cortex-M4F |
| Instruction Set | 32-bit RISC |
| USB Support | Dual USB: Full-Speed and High-Speed |
| Ethernet Support | Yes |
| 패키지 | 144-LQFP, 20 x 20 mm |
| 핀 수 | 144 pins |
| 실장 유형 | Surface Mount |
| Operating Voltage | 1.8 V / 2.5 V / 3.3 V |
| Program Memory Type | Flash |
| Architecture | ARMv7E-M with single-precision floating-point support |
| Application Category | Complex embedded applications and control systems |
MK66FN2M0VLQ18 144-lqfp, 20 x 20 mm 핀 구성 가이드
MK66FN2M0VLQ18(144-lqfp, 20 x 20 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MK66FN2M0VLQ18.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MK66FN2M0VLQ18 적합 용도: 6 애플리케이션s: Industrial Ethernet Control, USB Data Acquisition, Motor Control, Building Automation Gateway, Human-Machine Interface Controller, Connected Sensor Hub.
Industrial Ethernet Control
The MK66FN2M0VLQ18 fits connected machine controllers that require local protocol handling and real-time control. Its 180 MHz ARM Cortex-M4F core provides processing capacity, while 2 MB flash and 256 KB SRAM can host application firmware, diagnostics, and communication stacks. Ethernet support reduces the need for a separate network controller. The design must verify the required PHY, isolation, magnetics, connector, and industrial temperature requirements; Ethernet capability alone does not provide galvanic isolation or regulatory compliance.
추천
USB Data Acquisition
The dual USB capability makes the MK66FN2M0VLQ18 relevant to multi-interface measurement equipment and data loggers. The full-speed and high-speed controllers can serve different device or host requirements, while 256 KB SRAM supports buffering and 2 MB flash stores firmware. High-speed layout, impedance control, connector selection, and firmware support require early validation. NXP community guidance specifically notes that the high-speed USB module may need an internal PLL configured correctly.
추천
Motor Control
The 180 MHz Cortex-M4F core and substantial SRAM make the MK66FN2M0VLQ18 appropriate for advanced motor-control supervisory and digital signal processing. Single-precision floating-point instructions can support control calculations, while Ethernet and USB provide configuration and monitoring paths. It does not eliminate the need for external gate drivers, power stages, current sensing, or protection networks. Pin assignment, PWM resources, analog channels, timing margins, and safe-state behavior must be checked for the selected motor-control architecture.
추천
Building Automation Gateway
The MK66FN2M0VLQ18 can serve as an embedded gateway for building automation equipment requiring Ethernet, USB service connectivity, and substantial local firmware. Its 2 MB flash accommodates a networking stack and application logic, while the 180 MHz core leaves capacity for protocol conversion and diagnostics. A production design must define connector protection, surge withstand, isolated communications, secure boot requirements, and update mechanisms. Verify low-power behavior and available peripheral functions against the exact NXP documentation before selecting it.
추천
Human-Machine Interface Controller
The MK66FN2M0VLQ18 can manage complex user interfaces, status displays, data entry, and communications in industrial panels. Its 180 MHz Cortex-M4F performance supports responsive control logic, while 2 MB flash and 256 KB SRAM allow larger firmware and local buffers than smaller Kinetis options. USB can simplify service connectivity or peripheral integration. Actual suitability depends on display-interface availability, touch-controller support, external memory requirements, operating temperature, and enclosure EMI requirements, which must be confirmed in the datasheet.
추천
Connected Sensor Hub
The MK66FN2M0VLQ18 is suitable for a connected sensor hub that aggregates measurements, configures peripherals, and forwards data over Ethernet or USB. Its large internal memories support buffering, protocol stacks, and local data processing, while the Cortex-M4F core handles filtering and control calculations. The MCU still needs suitable analog front-end components and appropriate sensor excitation. Validate ADC-related external circuits, communication timing, low-power requirements, and calibration strategy even though the verified sources primarily confirm core, memory, USB, Ethernet, and package data.
추천
추천 제품 요약
엔지니어링 참조 데이터: MK66FN2M0VLQ18 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MK60FN1M0VLQ12 | MK64FN1M0VLQ12 | MK60FN1M0VMD12 |
|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum Frequency | 180 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 2 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 256 KB | 128 KB | 128 KB | 128 KB |
| Ethernet Support | Yes | Yes | Yes | Yes |
주요 차별점
- Twice the flash memory of the cited Kinetis alternatives (vs MK60FN1M0VLQ12)
- Twice the SRAM of the cited Kinetis alternatives (vs MK60FN1M0VMD12)
- Higher maximum CPU frequency than the compared Kinetis family parts (vs MK64FN1M0VLQ12)
설계 노트
Route the 144-LQFP using manufacturer-recommended land geometry and verify every multiplexed signal before placement. Place decoupling and bulk-supply capacitors close to their assigned power pins, preserve the exposed return path required by the package, and avoid switching-node routing beneath sensitive communication lines. For high-speed USB or Ethernet, use geometry reviewed against the NXP design recommendations and the selected connector or PHY reference design.
Treat high-speed USB, Ethernet clocks, and differential interfaces as controlled-impedance nets. NXP community guidance notes that the K66 high-speed USB module may require an internal PLL to be enabled, and incorrect configuration can prevent enumeration or reliable transfer. Validate source and destination impedances, reference-plane continuity, connector placement, branch lengths, shielding, and firmware clock settings with measurements from the final PCB.
Do not treat shared Kinetis packaging or a community replacement discussion as proof of a drop-in upgrade. Compare boot configuration, power pins, pin multiplexing, clock routing, USB roles, Ethernet resources, memory-map assumptions, and startup code. The MK66 has more flash and SRAM than the MK60 references and may expose additional peripherals; a successful board boot therefore does not by itself prove that every legacy function is interchangeable.
Plan all three verified supply options—1.8 V, 2.5 V, and 3.3 V—against the internal voltage and external I/O requirements before selecting resistor straps and regulators. Use the NXP power-management guidance to distinguish core, I/O, analog, and USB supply domains. Confirm regulator startup, sequencing, current margin, analog filtering, and decoupling values from the exact datasheet rather than copying another Kinetis board without review.
규정 준수 정보
The verified source excerpts do not provide explicit compliance declarations. Automotive qualification was not claimed; use an automotive-qualified ordering option where required.