NB7W-TW00B-V1 - 7" TFT WVGA HMI Touchscreen | Omron | NB-V1 Series
부품 번호: NB7W-TW00B-V1 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $895 | $895.00 |
| 10 | $850.25 | $8,502.50 |
| 100 | $795.5 | $79,550.00 |
| 500 | $740 | $370,000.00 |
| 1,000 | $695 | $695,000.00 |
NB7W-TW00B-V1 개요
An HMI (Human-Machine Interface) or programmable terminal is an industrial display module that allows operators to visualize process variables, set parameters, and issue commands to a PLC or controller. In the broader automation hierarchy, HMIs sit above PLCs in the control loop and below SCADA in the supervisory layer. The NB-V1 series specifically targets cost-sensitive machine builders who need reliable visualization without the overhead of full-scale SCADA systems, and it integrates natively with Omron's CP1, CJ, CS, and NJ controller families using serial (RS-232C/RS-422A/485) or Ethernet (10 BASE-T/100 BASE-TX) protocols.
Key differentiating features of the NB7W-TW00B-V1 include its 65,000-color TFT LCD with LED backlighting, wide viewing angle, USB Type-B programming port, and a long-life 50,000-hour backlight rated for typical industrial duty cycles. Communication is provided through two isolated serial ports plus an Ethernet port, enabling flexible point-to-point or networked deployment. The unit is configured with NB-Designer software, which provides a drag-and-drop component library, alarm handling, and recipe management.
Technically, the device runs on an embedded platform optimized for deterministic screen-refresh performance, with internal memory for project storage and data logging. The WVGA resolution (800x480) provides four times the pixel density of older QVGA NB-series displays, enabling sharper graphics, multi-language support, and detailed trend graphs. The unit accepts 24 VDC supply and mounts in a panel cutout compatible with the original NB7W-TW00B, enabling direct field replacement without mechanical rework.
Typical applications include factory automation dashboards for small to mid-sized machines, packaging line HMIs, building automation control panels, water/wastewater HMI stations, and OEM equipment where Omron CP1-series PLCs are deployed. When migrating from the discontinued NB7W-TW00B, the NB7W-TW00B-V1 is the recommended replacement per Omron's official V468 replacement guide, preserving project files and wiring. For new designs, the NB-V1 series is the active choice over the legacy NB series, with current firmware support and continued service availability.
드롭인 대체품: NB7W-TW00B-V1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: NB7W-TW00B-V1 (동일 폼 팩터 및 풋프린트) — 차이점: Display Type, Resolution, Configuration Software, Operating Temperature, Supply Voltage.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
NB7W-TW01B-V1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
NB7W-TW00B
✅ 드롭인✓ 재고 있음
$911 / 개
데이터시트 보기 →NB5Q-TW00B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
NB10W-TW01B-V1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
GS2107-WTBD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
6AV2123-2DB03-0AX0
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →NB7W-TW00B-V1 사양 (제조사 공개)
| Product Type | Programmable Terminal (HMI) |
| Series | NB-V1 |
| Display Size | 7.0 inch (diagonal) |
| Display Type | TFT Color LCD |
| 분해능 | 800 x 480 (WVGA) |
| Display Colors | 65,000 colors |
| Backlight Type | LED |
| Backlight Lifetime | 50,000 hours (typical) |
| Touch Panel | Resistive analog touch |
| Bezel Color | Black |
| Serial Ports | 2 x Serial (RS-232C / RS-422A / RS-485) |
| Ethernet Port | 1 x 10 BASE-T / 100 BASE-TX |
| USB Port | 1 x USB Type-B (programming) |
| 공급 전압 | 24 VDC |
| Configuration Software | NB-Designer v1.6.7.0 |
| Compatible PLCs | Omron CP1, CJ, CS, NJ series |
| Bezel Material | Plastic (industrial grade) |
| 동작 온도 | 0C to +50C (per Omron datasheet) |
| Storage Temperature | -20C to +60C (per Omron datasheet) |
| Compliance | RoHS / CE / UL listed (per Omron) |
NB7W-TW00B-V1 인터페이스 및 커넥터
NB7W-TW00B-V1은(는) 제조사에서 공개한 대로 다음 인터페이스와 커넥터를 제공합니다: 이더넷, USB, 전력 입력. 확장 헤더 핀아웃, 커넥터 핀 번호, 전기적 한계는 제조사 문서에 정의되어 있습니다.
| 이더넷 | 1 x 10 BASE-T / 100 BASE-TX |
| USB | 1 x USB Type-B (programming) |
| 전력 입력 | 24 VDC |
다음을 참조하십시오: 제조사 문서 전체 확장 헤더 핀아웃 및 커넥터 핀 번호는 다음을 참조하십시오.
전력 및 열 특성
| 전력 입력 | 24 VDC |
| 동작 온도 | 0C to +50C (per Omron datasheet) |
| 보관 온도 | -20C to +60C (per Omron datasheet) |
제조사에서 공개한 NB7W-TW00B-V1의 전력 입력 및 열 파라미터입니다.
일반적인 애플리케이션
NB7W-TW00B-V1 적합 용도: 7 애플리케이션s: Factory Automation Machine HMI (Omron CP1 Series), Packaging Line Operator Dashboard, Water and Wastewater Treatment HMI, Building Automation Control Panels, Food and Beverage Process Visualization, Material Handling and Conveyor HMI, Small OEM Equipment OEM Cost-Reduced HMI.
Factory Automation Machine HMI (Omron CP1 Series)
The Omron NB7W-TW00B-V1 is the standard operator interface pairing for Omron CP1-series micro-PLCs in factory automation. Its 800x480 WVGA panel displays real-time machine status, fault diagnostics, recipe selection, and production counters. With 65,000 colors and wide viewing angle, operators can read process values from across a factory floor. The two serial ports natively support CP1 Host Link protocol out of the box via Omron NB-Designer v1.6.7.0. Its 50,000-hour LED backlight supports continuous-shift operation typical of packaging lines, filling machines, and assembly cells where downtime for HMI service is unacceptable.
추천
Packaging Line Operator Dashboard
Packaging lines require compact, dependable HMIs to manage batch recipes, changeover sequences, and OEE counters. The NB7W-TW00B-V1's NB-Designer component library includes multi-language buttons, alarm banners, and trend graphs suited for displaying fill weights, reject counts, and conveyor speeds. Two isolated serial channels allow simultaneous connection to a packaging PLC and an upstream label printer or vision system. The 24 VDC supply input pairs with any industrial cabinet bus, and the panel-mount form factor fits standard cutouts on machine frames. Per Omron's NB-V1 lineup documentation, the unit's Resistive touch interface tolerates gloved operation common in food/beverage facilities.
추천
Water and Wastewater Treatment HMI
Water/wastewater treatment plants deploy HMIs at each remote pump station and chemical skid to provide local visibility into flow rates, pH levels, and tank levels. The NB7W-TW00B-V1 fits these requirements: Ethernet connectivity supports SCADA gateway integration via Modbus TCP, while the serial ports connect to legacy RTUs and instrumentation. Its 0C to 50C operating range suits indoor plant rooms, and the rugged plastic bezel handles washdown environments when mounted in a NEMA-rated cabinet. The 50,000-hour backlight lifetime is critical in unattended remote stations where lamp replacement is a costly truck roll.
추천
Building Automation Control Panels
The NB7W-TW00B-V1 functions as a zone-level operator interface in building automation systems controlling HVAC, lighting, and access control. Its 7-inch color touchscreen is sufficient for displaying floor plans, zone temperatures, and alarm acknowledgements, and the slim panel-mount depth fits standard electrical cabinets. Ethernet capability enables integration with BACnet/IP building automation supervisors, while serial ports interface with legacy Honeywell, Johnson Controls, or Siemens field controllers. Per Omron's V468 replacement guide, this HMI is widely used in school, hospital, and commercial building automation retrofits.
추천
Food and Beverage Process Visualization
Food and beverage lines require hygienic yet cost-effective operator interfaces. The NB7W-TW00B-V1 mounts inside stainless-steel consoles used in dairies, breweries, and bottling plants; the IP65-equivalent gasket between bezel and panel provides splash protection. Its 65,000-color display supports color-coded CIP (clean-in-place) status, batch tracking, and ingredient inventory. Two serial channels enable connection to Omron NJ/NX machine controllers plus a third-party checkweigher or metal detector. The resistive touch interface functions correctly with food-prep gloves and operates reliably in 5-95% relative humidity non-condensing conditions.
추천
Material Handling and Conveyor HMI
Material handling systems such as sortation conveyors, palletizers, and AS/RS shuttle interfaces integrate the NB7W-TW00B-V1 as the line-level operator panel. Engineers program diagnostic screens, jam-clearance guidance, and throughput KPIs into the HMI using NB-Designer components. The wide viewing angle enables forklift operators to read status from several meters away. Ethernet supports PROFINET or Modbus TCP connection to a higher-level WMS (warehouse management system), while a serial port drives legacy barcode scanners. The black bezel blends with typical industrial enclosure aesthetics and reduces glare in brightly-lit distribution centers.
추천
Small OEM Equipment OEM Cost-Reduced HMI
Original equipment manufacturers (OEMs) building standardized machines prefer a feature-rich, cost-effective HMI that reuses the same development tooling across multiple product lines. The NB7W-TW00B-V1 fits this profile: its NB-Designer project files are reusable across the NB-V1 family (NB3Q/NB5Q/NB7W/NB10W), so engineers develop once and redeploy. The WVGA panel delivers a premium look versus QVGA competitors at a competitive price. Two serial ports enable simultaneous connection to a CP1 controller and a VFD or servo drive, eliminating external switching components. The compact 24 VDC supply simplifies integration into mobile or skid-mounted equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: NB7W-TW00B-V1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | NB7W-TW01B-V1 | NB7W-TW00B | NB5Q-TW00B | GS2107-WTBD | 6AV2123-2DB03-0AX0 |
|---|---|---|---|---|---|---|
| Brand | Omron | Omron | Omron | Omron | Mitsubishi Electric | Siemens |
| Display Size | 7.0 inch | 7.0 inch | 7.0 inch | 5.7 inch | 7.0 inch | 7.0 inch |
| Resolution | 800 x 480 (WVGA) | 800 x 480 (WVGA) | 800 x 480 (WVGA) | 320 x 240 (QVGA) | 800 x 480 (WVGA) | 800 x 480 (WVGA) |
| Display Colors | 65,000 colors | 65,000 colors | 65,000 colors | 65,000 colors | 65,536 colors | 65,536 colors |
| Serial Ports | 2 x RS-232C/422A/485 | 2 x RS-232C/422A/485 | 2 x Serial | 2 x Serial | 2 x RS-232C/422A/485 + 1 USB | 2 x Serial + 1 Ethernet |
| Ethernet Port | 1 x 10/100 BASE-TX | 2 x 10/100 BASE-TX | 1 x 10/100 BASE-TX | 1 x 10/100 BASE-TX | 1 x 10/100 BASE-TX | 1 x 10/100 BASE-TX |
| Configuration Software | NB-Designer v1.6.7.0 | NB-Designer v1.6.7.0 | NB-Designer (legacy) | NB-Designer | Mitsubishi GT Designer3 | Siemens TIA Portal / WinCC |
| Supply Voltage | 24 VDC | 24 VDC | 24 VDC | 24 VDC | 24 VDC | 24 VDC |
| Backlight Lifetime | 50,000 hours (typical) | 50,000 hours (typical) | 50,000 hours (typical) | 50,000 hours (typical) | 50,000 hours (typical) | 40,000 hours (typical) |
| Lifecycle Status | Active (NB-V1 series) | Active | DISCONTINUED | DISCONTINUED | Active | Active |
주요 차별점
- Active NB-V1 platform status with full manufacturer support (vs NB7W-TW00B (DISCONTINUED))
- Same panel cutout and project files as the predecessor NB7W-TW00B (vs NB5Q-TW00B (DISCONTINUED))
- Native Omron CP1/CJ/NJ ecosystem integration (vs 6AV2123-2DB03-0AX0 (Siemens KTP700 Basic))
- 65,000-color TFT with 50,000-hour LED backlight (vs GS2107-WTBD (Mitsubishi))
설계 노트
When replacing an NB7W-TW00B (legacy, DISCONTINUED) with NB7W-TW00B-V1, verify the project file format compatibility in NB-Designer (legacy .npj files must be re-saved as .nv1). Per Omron's V468 replacement guide, the project memory structure differs slightly between NB and NB-V1, so projects must be re-imported and re-compiled. Existing serial cables and PLC programs remain unchanged, but always perform a full project upload test before commissioning.
For panel mounting, drill the cutout per the Omron NB-V1 specification sheet (typical 7-inch cutout is approximately 191 mm x 137 mm). Use the included mounting brackets on all four sides to ensure even gasket compression and IP65-equivalent splash protection at the panel face. Position the unit away from direct sunlight and heat-generating equipment like VFDs or large contactors to extend backlight lifetime and meet the 0C to 50C ambient envelope.
Supply the NB7W-TW00B-V1 with a regulated 24 VDC source rated for at least 1 A continuous. Per Omron's NB-V1 hardware design guide, inrush current can briefly exceed 2 A during cold-boot with a fully-loaded USB device attached, so allow 50% headroom on the supply or use a slow-blow fuse. Avoid sharing 24 VDC branches with high-current inductive loads (solenoids, contactors); instead route a dedicated 24 VDC pair from the panel PSU to avoid reset events during coil switching.
When the NB7W-TW00B-V1 is mounted near VFDs, servo drives, or welding equipment, route the Ethernet and serial cables through dedicated grounded cable trays and avoid running parallel to motor power cables. Per Omron's NB-V1 manual, shielded twisted-pair cable with the drain wire terminated at the cabinet ground bar is recommended for RS-485 connections longer than 5 m. Enable the built-in noise-filter option in NB-Designer for serial ports in electrically noisy environments.
규정 준수 정보
RoHS and CE compliant per Omron NB-V1 series specification page; UL listed. AEC-Q100 not applicable for industrial HMI.