Cisco의 NCS-5001-FN-FR - NCS 5001 Fan, Front-to-Back Airflow | Cisco NCS-5001-FN-FR - 전자 부품
Cisco

NCS-5001-FN-FR - NCS 5001 Fan, Front-to-Back Airflow | Cisco

부품 번호: NCS-5001-FN-FR ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
시작가 $351.47 USD / 개
MOQ: 1 |
가격 업데이트: 2026-10-19
볼륨 가격
수량 단가 합계
1 $351.47 $351.47
10 $351.47 $3,514.70
100 $351.47 $35,147.00
500 $351.47 $175,735.00
1,000 $351.47 $351,470.00
ℹ️ 모든 가격은 USD 기준입니다
데이터시트 보기 (PDF) 대체품 보기

NCS-5001-FN-FR 개요

The Cisco NCS-5001-FN-FR is a front-to-back airflow fan unit designed as the field-replaceable cooling module for the Cisco Network Convergence System 5001 (NCS 5001) router. It is a 1RU chassis fan assembly that mounts in the NCS 5001 dense 10/100 Gigabit Ethernet aggregation router, moving air from the front of the chassis to the back to dissipate heat generated by the NPU, forwarding ASICs, and power supply under full line-rate traffic. The trailing '=' spare SKU (NCS-5001-FN-FR=) is the orderable spare-part configuration, and the -RF suffix designates Cisco Remanufactured stock.

A chassis fan module is an electromechanical thermal-management subsystem within the broader network hardware hierarchy: fan assembly -> thermal management subsystem -> network router -> service provider aggregation platform. In high-density routing platforms such as the Cisco NCS 5000 Series, redundant cooling is mandatory because these routers are specified for continuous operation in service provider access and aggregation networks where a thermal event can take an entire aggregation ring offline.

Key characteristics of the NCS-5001-FN-FR include dedicated front-to-back airflow direction that must match the chassis airflow scheme and the installed power supplies, shrouded fan-blade design that lets air flow over a greater area for effective cooling (as described by Cisco's spare-part documentation), and hot-swap field replacement so the fan tray can be exchanged without powering down the router. The unit weighs approximately 2.15 lbs (0.98 kg) per distributor data and is covered by a 3-year warranty from select resellers.

Technically, the fan tray operates under the control of the NCS 5001 chassis supervisor, which monitors fan speed and reports thermal status through Cisco IOS XR Software telemetry. Mismatched airflow direction (installing a front-to-back fan in a back-to-front chassis) is a common field error that triggers environmental alarms and can void thermal specification compliance.

Typical applications include service provider access and aggregation POPs, MPLS-enabled data center edge deployments, mobile backhaul aggregation sites, and any NCS 5001 installation requiring a replacement or spare cooling module.

When replacing this module, verify the airflow arrow on the fan tray matches the direction printed on the chassis and PSU faces before insertion.

This page synthesizes distributor pricing, Cisco spare-part cross-SKU variants, and airflow-orientation guidance not consolidated in any single Cisco datasheet.

드롭인 대체품: NCS-5001-FN-FR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

NCS-5001-FN-FR=

✅ 드롭인
📦 NCS 5001 fan tray
identical front-to-back fan unit in Cisco '=' spare-part configuration (boxed replacement); zero parametric difference

📋 참조 대체품 (카탈로그에 없음)

NCS-5001-FN-FR-RF

✅ 드롭인
📦 NCS 5001 fan tray
same fan unit, Cisco Remanufactured (certified refurbished) stock at lower price; identical fit and airflow

📋 참조 대체품 (카탈로그에 없음)

CSC-NCS-5001-FN-FR=

✅ 드롭인
📦 NCS 5001 fan tray
bundle SKU containing the identical fan unit with service/bundled ordering; same 2.15 lbs front-to-back airflow hardware, 3-year warranty

📋 참조 대체품 (카탈로그에 없음)

NCS-5001-FN-FR 사양

Product Type Fan unit (chassis fan tray spare)
Compatible Chassis Cisco NCS 5001 Router
Airflow Direction Front to Back
Number of Fans 1 fan assembly
Weight 2.15 lbs (0.98 kg)
Warranty 3-Year Warranty (per reseller listing)
Hot-Swap Replacement Yes (field-replaceable spare)
Host Operating System Cisco IOS XR Software
Host Platform Series Cisco NCS 5000 Series
Host Chassis Form Factor 1RU
Host Router Class Dense 10/100GE aggregation router
Spare Part Number Suffix = (spare configuration)
Remanufactured Variant NCS-5001-FN-FR-RF

NCS-5001-FN-FR standard 핀 구성 가이드

NCS-5001-FN-FR(standard 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

NCS-5001-FN-FR의 standard 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: NCS-5001-FN-FR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

NCS-5001-FN-FR 적합 용도: 6 애플리케이션s: Service Provider Access and Aggregation POPs, Mobile Backhaul Aggregation, MPLS-Enabled Data Center Interconnect, Video and Content Delivery Networks, Enterprise Campus Core and WAN Edge, Network Rollout and Spares Management.

🌐

Service Provider Access and Aggregation POPs

The NCS-5001-FN-FR is the designated cooling module for Cisco NCS 5001 routers deployed in service provider access and aggregation points of presence, where the 1RU chassis aggregates dense 10/100GE traffic under IOS XR. The NCS 5000 Series data sheet positions these routers for elastic networks carrying high-bandwidth mobile, video, and cloud services, which keeps NPUs near full utilization and heat output near maximum. A functioning front-to-back fan tray maintains the chassis thermal envelope so the router sustains line-rate forwarding without throttling or environmental shutdown. Operators should keep one NCS-5001-FN-FR= spare per site because a fan failure in an aggregation POP can force immediate traffic migration.

추천

NCS-5001-FN-FR= (New spare of the same fan unit) NCS-5001-FN-FR-RF (Remanufactured spare option)
📱

Mobile Backhaul Aggregation

In mobile backhaul aggregation sites, the Cisco NCS 5001 terminates high-bandwidth 4G/5G fronthaul and backhaul rings where latency and availability SLAs are strict. The NCS-5001-FN-FR maintains front-to-back airflow across the 1RU chassis so forwarding silicon remains within specified junction temperatures during sustained peak traffic, such as evening video surges. Because these sites are often unmanned, the fan tray is monitored through Cisco IOS XR telemetry that reports fan speed and thermal status to the management system. A failed fan in an unstaffed site must be swapped on the next truck roll, making on-site spares of the NCS-5001-FN-FR= a standard inventory item for backhaul operators.

추천

NCS-5001-FN-FR= (Cold-spare fan tray)
🖥️

MPLS-Enabled Data Center Interconnect

Cisco positions the NCS 5000 Series for MPLS-enabled data center architectures delivering elastic networks with simplified operations. In DC edge and interconnect roles, NCS 5001 routers sit in rack rows with defined airflow policy; the NCS-5001-FN-FR enforces front-to-back airflow alignment with the facility's cold-aisle/hot-aisle containment. Mismatched airflow in a contained aisle raises intake temperature, elevating all silicon temperatures in the rack and potentially tripping IOS XR environmental alarms. Data center operators should verify the fan tray airflow arrow matches the PSU airflow marking during commissioning and keep the fan firmware/configuration consistent with the chassis supervisor via routine IOS XR maintenance.

추천

NCS-5001-FN-FR= (Replacement fan module) NCS-5001-FN-FR-RF (Budget spare for lab/backup racks)
📺

Video and Content Delivery Networks

The Cisco NCS 5000 Series data sheet explicitly cites high-bandwidth video services as a target workload, and video distribution generates sustained, near-constant forwarding loads that hold chip power at peak for hours. The NCS-5001-FN-FR's shrouded fan-blade design, which lets air flow over a greater area for effective cooling per Cisco spare documentation, is what allows the 1RU NCS 5001 to sustain these workloads within its acoustic and thermal limits. CDN operators running 24/7 traffic should monitor fan status via IOS XR telemetry and treat any fan-tray alarm as a same-day replacement trigger, since video SLAs penalize even short aggregation-node outages.

추천

NCS-5001-FN-FR= (On-site spare)
🏭

Enterprise Campus Core and WAN Edge

Large enterprises deploy the NCS 5001 as a WAN edge and campus core aggregation router running segment routing and MPLS VPN services under IOS XR. In wiring closets and campus POPs with constrained airflow, the NCS-5001-FN-FR front-to-back fan tray is the primary forced-air cooling path; ambient conditions in closures can exceed data-center norms, raising the importance of verified fan operation. Enterprise network teams typically standardize on the '=' spare SKU with a 3-year reseller warranty for asset-management simplicity. Matching fan airflow to the installed PSU airflow direction is essential because mixed airflow in a 1RU chassis degrades cooling for both modules.

추천

NCS-5001-FN-FR= (Warranty-backed spare)
🔧

Network Rollout and Spares Management

For network integrators and managed service providers staging fleets of NCS 5001 routers, the NCS-5001-FN-FR is a stock-keeping spare covering both new deployments and break-fix events. Because Cisco offers the same hardware as new (NCS-5001-FN-FR=) and remanufactured (NCS-5001-FN-FR-RF) stock, logistics teams can tier inventory: remanufactured units for depot spares and new units for customer-contract sites. Gross shipping weight is approximately 1 kg per Alibaba trade data, making the module cheap to stage regionally. Integrators should record the chassis airflow direction at each site when provisioning so the correct fan variant ships with every service kit.

추천

NCS-5001-FN-FR-RF (Depot-tier remanufactured spare) NCS-5001-FN-FR= (Contract-tier new spare)

추천 제품 요약

NCS-5001-FN-FR= New spare of the same fan unit 사용처: Service Provider Access and Aggregation POPs, Mobile Backhaul Aggregation, MPLS-Enabled Data Center Interconnect, Video and Content Delivery Networks, Enterprise Campus Core and WAN Edge, Network Rollout and Spares Management NCS-5001-FN-FR-RF Remanufactured spare option 사용처: Service Provider Access and Aggregation POPs, MPLS-Enabled Data Center Interconnect, Network Rollout and Spares Management
What is the Cisco NCS-5001-FN-FR?
The NCS-5001-FN-FR is a Cisco fan unit providing front-to-back airflow cooling for the Network Convergence System 5001 (NCS 5001) router. It is the field-replaceable cooling module for the 1RU dense 10/100GE aggregation chassis, weighing about 2.15 lbs. According to Cisco's NCS 5000 Series data sheet, the NCS 5001 is designed for service provider access and aggregation networks, and this fan tray keeps the chassis within its thermal specification under full traffic load.
What is the price of NCS-5001-FN-FR?
The NCS-5001-FN-FR fan unit is listed at approximately $351.47 USD at resellers such as Tecisoft, as of 2026-10-19. Prices vary by channel: the Cisco Global Price List (GPL) baseline and discounted partner pricing can differ substantially, and the Cisco Remanufactured variant NCS-5001-FN-FR-RF is typically priced lower than new spare stock. Always request a quote for volume or maintenance-contract pricing.
Where can I buy NCS-5001-FN-FR online?
The NCS-5001-FN-FR fan unit is available from Cisco authorized resellers and IT hardware distributors including SHI (shi.com), Hummingbird Networks, Tecisoft, LT Partners, and ServerTechCentral, as well as XAIPART. Verify that the seller is a trusted Cisco partner to avoid counterfeit network hardware, and confirm whether you need the '=' spare suffix SKU (new spare), the -RF suffix (Cisco Remanufactured), or the CSC- prefixed bundle SKU.
What is the difference between NCS-5001-FN-FR and NCS-5001-FN-FR= ?
The NCS-5001-FN-FR= with the trailing '=' is Cisco's orderable spare-part SKU, sold as an individually boxed replacement unit; NCS-5001-FN-FR without the '=' refers to the fan module as shipped pre-installed inside a new NCS-5001 chassis. Functionally the hardware is identical - same front-to-back airflow fan assembly for the NCS 5001. When ordering a replacement or holding a spares inventory, purchase the '=' spare SKU.
Is NCS-5001-FN-FR the same as NCS-5001-FN-FR-RF?
The NCS-5001-FN-FR-RF is the Cisco Remanufactured version of the NCS-5001-FN-FR fan unit. Both are front-to-back airflow fan assemblies for the NCS 5001 router with the same fit, form, and function. The -RF variant is used equipment restored and certified by Cisco, typically sold at a lower price with its own warranty terms, whereas the standard NCS-5001-FN-FR= is new spare stock. Both are drop-in compatible with any NCS 5001 chassis specified for front-to-back cooling.
What is the best drop-in replacement for NCS-5001-FN-FR?
The best drop-in replacement for the NCS-5001-FN-FR is the identical Cisco spare NCS-5001-FN-FR= or the Cisco Remanufactured NCS-5001-FN-FR-RF - both install directly into the NCS 5001 fan bay with no configuration change. There is no third-party equivalent fan tray: the module is proprietary Cisco hardware whose form factor, connector, and IOS XR fan-control integration are specific to the NCS 5001 chassis, so only Cisco-supplied units are supported replacements.
What is the difference between NCS-5001-FN-FR and CSC-NCS-5001-FN-FR= ?
CSC-NCS-5001-FN-FR= is a bundle/service-entitlement SKU that includes the same NCS 5001 front-to-back fan unit, packaged by Cisco with additional services or bundled ordering terms; the fan hardware itself is identical. Distributor listings for CSC-NCS-5001-FN-FR= show the same 2.15 lbs fan unit with a 3-year warranty. Physically and electrically, either SKU delivers the same front-to-back airflow fan module for the NCS 5001 chassis.
When should I choose NCS-5001-FN-FR over NCS-5001-FN-FR-RF?
Choose the new NCS-5001-FN-FR= spare when you require factory-new hardware - for example, in service provider networks with contractual requirements for new parts, or when maximum service life is needed. Choose the NCS-5001-FN-FR-RF remanufactured variant when budget is constrained or when replenishing cold-spare inventory, since it is Cisco-certified refurbished at lower cost. Both are front-to-back airflow units with identical fit in the NCS 5001 chassis.
Is NCS-5001-FN-FR suitable for a back-to-front NCS 5001 deployment?
No. The NCS-5001-FN-FR provides front-to-back airflow only. If your NCS 5001 installation uses back-to-front airflow - typically to match a data center hot-aisle/cold-aisle layout or to align with the installed power supply airflow direction - you must order the opposite-airflow fan variant for the chassis. Installing mismatched airflow direction triggers Cisco IOS XR environmental alarms and can cause overheating. Always match fan, PSU, and chassis airflow arrows before insertion.
Which chassis does the NCS-5001-FN-FR fit?
The NCS-5001-FN-FR is designed exclusively for the Cisco NCS 5001 router, a 1RU dense 10/100GE aggregation platform in the Cisco NCS 5000 Series. It does not fit the 2RU NCS 5002 or other NCS 5000 chassis, which use different fan modules. According to Cisco's Hardware Installation Guide for the NCS 5000 Series, fan trays are accessed from the chassis front and are field-replaceable while the system remains powered, provided the replacement is performed promptly.
Where can I find the NCS-5001-FN-FR datasheet and installation documentation?
Cisco does not publish a standalone datasheet for the fan spare; the governing documents are the Cisco NCS 5000 Series data sheet (datasheet-c78-736153 on cisco.com) and the Hardware Installation Guide for Cisco NCS 5000 Series Routers, which cover fan module specifications, airflow orientation, and replacement procedure. These PDF/HTML documents on cisco.com are the authoritative references for airflow requirements and environmental specifications of the NCS 5001 cooling subsystem.
Does the NCS 5001 require a redundant fan module?
The NCS 5001 chassis integrates its cooling with the NCS-5001-FN-FR fan unit as the designated spare, and Cisco's NCS 5000 data sheet positions the platform for carrier-grade access and aggregation where cooling availability matters. For production networks, holding at least one NCS-5001-FN-FR= on-site as a cold spare is a common best practice, because a failed fan tray in a fully loaded 10/100GE aggregation chassis can force traffic shutdown within minutes if ambient cooling is insufficient.
What are the key specifications of NCS-5001-FN-FR engineers should know?
Key facts: the NCS-5001-FN-FR is a Cisco fan unit for the NCS 5001 router with front-to-back airflow direction, one fan assembly, and a weight of approximately 2.15 lbs (0.98 kg). It is orderable as the '=' spare SKU, with the -RF suffix denoting Cisco Remanufactured stock. It operates under Cisco IOS XR fan-speed control and telemetry, is field-replaceable, and carries a 3-year warranty through certain resellers. Reseller pricing was approximately $351.47 as of 2026-10-19.
Is the NCS-5001-FN-FR still available or has it been discontinued?
As of 2026-10-19, the NCS-5001-FN-FR remains orderable through Cisco resellers such as SHI, Tecisoft, and Hummingbird Networks, and appears in current Cisco price listings alongside the NCS 5001 platform. However, Cisco has introduced later aggregation platforms, so long-term spare availability should be confirmed with your Cisco account team. The Cisco Remanufactured NCS-5001-FN-FR-RF channel provides continued supply even as new-stock availability eventually narrows.
What can replace NCS-5001-FN-FR in the field?
Only Cisco-supplied NCS 5001 fan units can replace the NCS-5001-FN-FR: the new spare NCS-5001-FN-FR=, the remanufactured NCS-5001-FN-FR-RF, or the CSC-NCS-5001-FN-FR= bundled SKU - all are the same front-to-back airflow hardware. Generic third-party fans are not interchangeable because the tray form factor, chassis connector, and IOS XR fan-monitoring integration are proprietary. For back-to-front installations, use the opposite-airflow Cisco fan SKU rather than modifying this module.

엔지니어링 참조 데이터: NCS-5001-FN-FR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the NCS-5001-FN-FR= (orderable spare, approximately $351.47 as of 2026-10-19) when you need factory-new replacement hardware for a production NCS 5001 router or want warranty-clean inventory under a 3-year reseller warranty. Choose the NCS-5001-FN-FR-RF when budget matters more than new-condition status - it is the Cisco-certified remanufactured version with identical front-to-back airflow and chassis fit, ideal for depot or lab spares. Choose the CSC-NCS-5001-FN-FR= bundle SKU only when the included services or contractual packaging are explicitly required. There is no third-party alternative: the tray form factor, chassis connector, and IOS XR fan-control integration are proprietary Cisco hardware. Always confirm the chassis airflow direction before ordering, since this unit is front-to-back only.

대체품과의 비교

파라미터 이 제품 NCS-5001-FN-FR= NCS-5001-FN-FR-RF CSC-NCS-5001-FN-FR=
Brand Cisco Cisco Cisco (Remanufactured) Cisco (bundle SKU)
Package / Form Factor NCS 5001 fan tray (proprietary) NCS 5001 fan tray - same NCS 5001 fan tray - same NCS 5001 fan tray - same
Airflow Direction Front to Back Front to Back Front to Back Front to Back
Fan Count 1 x fan 1 x fan 1 x fan 1 x fan
Weight 2.15 lbs (0.98 kg) 2.15 lbs 2.15 lbs 2.15 lbs
Condition New (module as shipped in chassis) New spare Cisco Remanufactured New (bundled SKU)
Compatible Chassis Cisco NCS 5001 Cisco NCS 5001 Cisco NCS 5001 Cisco NCS 5001

주요 차별점

  • New factory spare configuration (vs NCS-5001-FN-FR-RF)
  • Lower acquisition cost via remanufactured channel (vs NCS-5001-FN-FR=)
  • Standalone spare ordering (vs CSC-NCS-5001-FN-FR=)

설계 노트

The most frequent field error with the NCS-5001-FN-FR is airflow-direction mismatch. This unit moves air front-to-back; installing it in a chassis provisioned for back-to-front airflow (or pairing it with opposite-flow PSUs) degrades cooling and triggers Cisco IOS XR environmental alarms. Before insertion, verify the airflow arrow on the fan tray matches the arrow on the chassis and every installed power supply. Never mix airflow directions within one NCS 5001 chassis.

Cisco's spare documentation notes the fan blades and shroud are designed to let air flow over a greater area for effective cooling. To preserve this design intent, keep the chassis intake vents unobstructed, maintain the rack's front-to-back airflow containment, and confirm rack intake air is within the NCS 5000 Series environmental specification (consult the Cisco NCS 5000 data sheet, datasheet-c78-736153). A fan alarm on a fully loaded 10/100GE aggregation chassis should be treated as urgent; replace the tray promptly as it is hot-swappable.

Ordering mistakes are common across the SKU family: NCS-5001-FN-FR (module reference), NCS-5001-FN-FR= (orderable new spare), NCS-5001-FN-FR-RF (Cisco Remanufactured), and CSC-NCS-5001-FN-FR= (bundled SKU) all describe the same hardware. Verify the fan module is designated for the NCS 5001 chassis - it does not fit the NCS 5002 or other NCS 5000 platforms. Purchase only from trusted Cisco partners to avoid counterfeit network hardware.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance data is not stated in the provided distributor listings; consult Cisco's official product environmental compliance documentation for RoHS/REACH status of the NCS 5001 fan module.

데이터 검증일: 2026-10-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

NCS-5001-FN-FR NCS-5001-FN-FR datasheet Cisco NCS-5001-FN-FR fan unit NCS-5001-FN-FR price NCS 5001 fan front to back airflow spare NCS-5001-FN-FR vs NCS-5001-FN-FR-RF NCS-5001-FN-FR replacement fan module buy Cisco NCS 5001 fan tray what is the difference between NCS-5001-FN-FR and NCS-5001-FN-FR= Cisco NCS 5001 router cooling fan replacement NCS-5001-FN-FR= equivalent CSC-NCS-5001-FN-FR= specifications

관련 부품 & 용어

Cisco Cisco Systems NCS-5001-FN-FR NCS-5001-FN-FR= NCS-5001-FN-FR-RF CSC-NCS-5001-FN-FR= Cisco NCS 5001 Router Cisco NCS 5000 Series Network Convergence System fan unit fan tray front-to-back airflow field-replaceable unit Cisco IOS XR Software service provider aggregation MPLS-enabled data center hot-swap replacement RoHS spare part SKU thermal management
빠른 견적 RFQ
영업팀이 24시간 이내에 답변드립니다
부품 번호MfrPkg수량목표 가격
×
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

장바구니 0개 항목
장바구니가 비어 있습니다
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기