PCM3008T/2K 16-Bit Stereo Audio Codec | Texas Instruments
부품 번호: PCM3008T/2K ✓ 활성PCM3008T/2K 개요
An audio codec converts between analog audio signals and a digital data interface. In this product family, the ADC path digitizes left and right single-ended analog inputs, while the DAC path reconstructs digital audio into left and right analog outputs. The PCM3008 family is positioned as a compact single-chip solution for consumer audio, communication, and embedded audio equipment where a low-voltage digital interface and direct analog signal conversion are required.
The integrated codec architecture reduces the number of separate converters required in a stereo audio design. According to the manufacturer product information, both ADCs and DACs use delta-sigma modulation with 64-times oversampling. ADC channels include digital decimation filters and digital high-pass filters, while the DAC channels include an 8-times oversampling digital interpolation filter, a digital de-emphasis filter, and pop-noise-free muting. The line output also includes hardware control, as indicated by the product-page description.
The PCM3008T/2K is a 2.4 V part intended for low-voltage audio systems. The 16-bit resolution provides a 16-bit audio data format, while the stereo ADC and DAC arrangement supports two-channel capture and playback. Its TSSOP package is suitable for compact surface-mount layouts where a traditional analog and digital interface controller would be too large or unnecessarily complex.
Typical uses include portable consumer audio equipment, USB or digital audio accessory designs, sound-card and interface modules, voice terminals, multimedia appliances, and compact embedded audio products. The low-voltage architecture is useful when the surrounding system derives its analog and digital supply from a single low-voltage rail or a regulated 2.4 V source.
Designers should use the manufacturer datasheet pin-description table when assigning signal names and PCB tracks, especially for the serial audio interface, analog supplies, analog inputs, analog outputs, and control pins. Power and analog return paths should be routed carefully to minimize coupling between the converter sections and the digital interface. The exact input and output capacitor recommendations, clock requirements, and supported serial-interface modes should be confirmed from the manufacturer datasheet.
This product page combines the manufacturer product description, ordering information, distributor listing details, and cross-reference information for the PCM3008T/2K. The available data identifies the device as a 16-bit, 2 ADC/2 DAC, single-ended stereo audio codec in a 16-pin TSSOP package; additional electrical limits and detailed timing parameters should be taken directly from the manufacturer datasheet.
드롭인 대체품: PCM3008T/2K — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PCM3008T/2K (동일 폼 팩터 및 풋프린트) — 차이점: DAC Oversampling Ratio, Muting Function, Package.
PCM3008T/2KG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PCM3008TG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PCM3008T
✅ 드롭인가격 문의
데이터시트 보기 →PCM3008T/2K 사양
| Audio Codec Type | Stereo audio codec |
| ADC Resolution | 16 bit |
| DAC Resolution | 16 bit |
| Number of ADCs | 2 |
| Number of DACs | 2 |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| ADC Oversampling Ratio | 64 times |
| DAC Oversampling Ratio | 8 times |
| 공급 전압 | 2.4 V |
| 동작 온도 범위 | -25 °C to +85 °C |
| 패키지 | 16-pin TSSOP (PW) |
| 실장 유형 | Surface mount |
| Digital Interface | 16-bit serial audio interface |
| ADC Digital Filter | Digital decimation filter and digital high-pass filter |
| DAC Digital Filter | Digital interpolation filter and digital de-emphasis filter |
| Muting Function | Pop-noise-free muting |
| Line Output Control | Hardware control |
PCM3008T/2K 16-pin tssop (pw) 핀 구성 가이드
PCM3008T/2K(16-pin tssop (pw) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: PCM3008T/2K.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PCM3008T/2K 적합 용도: 6 애플리케이션s: Portable Consumer Audio, USB Audio Accessory, Voice Terminal, Multimedia Appliance, Sound Card Module, Embedded Audio Control.
Portable Consumer Audio
The PCM3008T/2K fits portable consumer audio equipment that needs stereo capture and playback from one compact low-voltage IC. Its two 16-bit ADCs and two 16-bit DACs provide a matched conversion path, while the 2.4 V supply supports compact system architectures. The 16-pin TSSOP package leaves more board area than a larger multi-function audio controller. Digital decimation, high-pass, interpolation, and de-emphasis filters are integrated, reducing external filter requirements. Pop-noise-free muting is useful when starting, stopping, or changing audio sources because it helps suppress audible transients. The designer should still budget for external input and output coupling components, clock generation, and layout separation between the analog converter sections and the serial digital interface.
추천
USB Audio Accessory
PCM3008T/2K can provide the analog conversion stage in a USB audio accessory when a system already handles the USB audio protocol elsewhere. The device accepts two single-ended analog inputs and drives two single-ended outputs at 16-bit resolution, enabling a compact line-in and line-out implementation. Its 2.4 V operating point is suitable for systems designed around low-voltage regulated rails. The serial digital interface provides a defined connection point between the codec and a digital audio controller. Because clocking, data format, and framing must match the external controller, use the manufacturer serial-interface timing information when selecting a companion processor. Keep analog input traces away from the digital clock and data lines, and follow the datasheet grounding and decoupling guidance.
추천
Voice Terminal
The PCM3008T/2K is suitable for voice terminals and intercom products that require both microphone capture and audio playback. Two single-ended ADC channels can accept left and right line-level or suitably conditioned microphone signals, while the dual DAC outputs support stereo monitoring or playback after the appropriate gain and power stages. The integrated ADC high-pass filter helps reject low-frequency components, and the pop-noise-free DAC muting function supports clean session transitions. The 2.4 V supply can simplify integration with low-voltage signal-chain components. For microphone operation, the circuit still requires suitable biasing or preamplification and must satisfy the input voltage limits in the manufacturer datasheet. Maintain a quiet analog return path and place input filtering close to the relevant pins.
추천
Multimedia Appliance
A compact multimedia appliance can use PCM3008T/2K to convert stereo program audio between analog circuitry and a digital media controller. The 16-bit ADC and DAC channels provide consistent resolution across capture and playback, while integrated oversampling and digital filters reduce the need for separate converter filter blocks. The 2.4 V operating voltage is advantageous in compact appliances with a constrained power budget or a common low-voltage analog rail. The 16-pin TSSOP package is suitable for automated surface-mount assembly and compact board planning. The key design consideration is system-level clock cleanliness: the serial interface, master clock, and analog converter sections must receive appropriate decoupling and grounding. Confirm supported clock and data formats with the digital controller vendor before laying out the interface.
추천
Sound Card Module
PCM3008T/2K can serve as the analog front end and output converter in a small sound-card or audio-interface module. Two single-ended inputs support stereo line capture, and two single-ended outputs support headphone or line playback when paired with suitable amplification. The converter’s 16-bit resolution and 2.4 V supply suit compact, cost-conscious interface hardware. Pop-noise-free muting helps control output transients during host commands or stream changes. Layout quality directly affects channel noise and interference, so analog input and output paths should remain short and away from serial data and clock traces. Use the manufacturer’s recommended passive values and reference configuration, and account for any external gain stage when defining full-scale input and output levels.
추천
Embedded Audio Control
The PCM3008T/2K can be integrated into an embedded control product that must monitor and reproduce stereo audio. A low-speed or industrial control system can use the 16-bit serial interface to exchange audio samples with a dedicated controller, while the dual ADC channels provide simultaneous stereo capture for status monitoring, recording, or diagnostics. The 2.4 V supply and compact TSSOP outline help reduce board complexity. Its integrated high-pass, decimation, interpolation, and de-emphasis functions make the codec suitable for straightforward audio paths. Firmware must support the codec’s required clocks, framing, and control timing. Power-up sequencing and mute behavior should also be coordinated so that the converter does not start before the external audio amplifier and system clocks are stable.
추천
엔지니어링 참조 데이터: PCM3008T/2K — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PCM3008T/2KG4 | PCM3008TG4 | PCM3008T |
|---|---|---|---|---|
| Package | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Audio Codec Type | Stereo audio codec | Stereo audio codec | Stereo audio codec | Stereo audio codec |
| ADC Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| DAC Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| ADC / DAC Configuration | 2 ADC / 2 DAC | 2 ADC / 2 DAC | 2 ADC / 2 DAC | 2 ADC / 2 DAC |
| Analog Signal Type | Single-ended input and output | Single-ended input and output | Single-ended input and output | Single-ended input and output |
주요 차별점
- Single-chip stereo conversion with integrated filtering (vs PCM3008T/2KG4)
- Pin-position-compatible family alternative (vs PCM3008T/2KG4)
- Compact low-voltage integration (vs PCM3008TG4)
설계 노트
Route the analog inputs and outputs away from the serial audio data, clock, and switching-supply nodes. Keep the input and output passive components close to their associated pins to minimize parasitic pickup. Use a continuous ground reference for the analog section and follow the manufacturer pinout and recommended-land-pattern information when assigning signals. The compact TSSOP footprint requires careful attention to solder-paste volume and thermal-via layout to achieve reliable assembly.
The codec operates from a 2.4 V supply, so power decoupling and supply-noise control are central to audio performance. Place the recommended bypass capacitors at the supply and ground pins with short, low-inductance traces, and verify the allowable supply tolerance and sequencing requirements in the manufacturer datasheet. Do not substitute a higher-voltage rail without checking the absolute maximum ratings. If analog and digital sections use separate supply branches, join them according to the manufacturer grounding guidance rather than through long PCB paths.
Treat the serial audio interface as a clock-sensitive digital subsystem. Route clock and data in a controlled impedance environment, avoid stubs, and keep the digital interface away from sensitive analog inputs. Confirm the supported clock rate, bit order, framing, and master-clock relationship against the manufacturer timing information and the companion controller specification. The codec’s filtering does not prevent clock or data crosstalk from entering the analog path, so layout and return-current discipline remain necessary.
Do not treat PCM3008T, PCM3008TG4, and PCM3008T/2KG4 as automatically identical production options. The cross-reference information establishes package and terminal consistency for the PCM3008 family, but ordering suffixes can identify differences in temperature range, finish, reel configuration, or manufacturing status. Compare the complete ordering codes, confirm the required tape-and-reel orientation, and verify all electrical limits in the manufacturer datasheet before releasing a substitution to production.
규정 준수 정보
The available product and distributor information does not state material-compliance declarations. AEC-Q100 is not applicable because PCM3008T/2K is an audio codec rather than an automotive-qualified device.