PEX8714-AB80BI - 12-Lane PCIe Gen 3 Switch | Broadcom
부품 번호: PEX8714-AB80BI ✓ 활성PEX8714-AB80BI 개요
A PCI Express switch is an interface semiconductor that routes PCI Express traffic between a host or multiple hosts and connected endpoint devices. Within the broader semiconductor hierarchy, it belongs to the interface IC class and supports PCIe expansion, aggregation, fan-out, and peer-to-peer topologies. This makes the PEX8714 applicable to servers, storage systems, and communications platforms requiring centralized PCIe connectivity.
The principal device ratings are 12 PCIe lanes, 5 switch ports, and operation at the PCI Express Gen 3 rate of 8.0 GT/s. Its multi-host architecture allows several hosts to connect to their respective endpoints through a non-blocking switching fabric. This topology can reduce system-level routing complexity while preserving high aggregate bandwidth for concurrent PCIe transactions.
The PEX8714 family is implemented in a 324-FCBGA package with a 19 mm by 19 mm body. This high-pin-count surface-mount package is intended primarily for advanced server, storage, and communications equipment rather than compact consumer boards. The manufacturer product brief identifies the device as suitable for fan-out, aggregation, and peer-to-peer PCIe applications.
Typical deployments include server backplanes that distribute PCIe connectivity to processors and accelerators, storage systems that aggregate multiple endpoint devices, and communications platforms that establish non-blocking host-to-endpoint paths. Its multi-host capability is particularly relevant where independent hosts require dedicated logical connectivity while sharing a broader switching infrastructure.
PCB implementation should follow the manufacturer’s package ball map and reference-layout requirements because the 324-FCBGA package requires dense, controlled-routing fan-out. Power delivery, reference-clock distribution, PCIe lane routing, and signal-integrity validation remain the principal engineering concerns.
This page consolidates the manufacturer product-brief specifications, exact orderable-part information, application guidance, package characteristics, and confirmed family comparison points. It also identifies where a true same-footprint substitute cannot be established without additional manufacturer or PCB-level validation.
드롭인 대체품: PEX8714-AB80BI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
PEX8714-AB80BBIG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PEX8714-AB80BI 최대 정격 & 전기적 특성
| PCI Express Generation | Gen 3 |
| PCI Express Data Rate | 8.0 GT/s |
| PCI Express Lane Count | 12 lanes |
| Switch Port Count | 5 ports |
| Topology Support | Multi-root |
| Switching Architecture | Non-blocking |
| Package Type | 324-FCBGA |
| Package Body Size | 19 mm x 19 mm |
| Device Function | PCI Express switch IC |
| Manufacturer | Broadcom |
| Product Family | ExpressLane PEX8714 |
| Host Support | Multiple hosts |
| Interconnection Type | PCI Express |
| RoHS 상태 | RoHS |
PEX8714-AB80BI 19 mm x 19 mm 핀 구성 가이드
PEX8714-AB80BI(19 mm x 19 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PEX8714-AB80BI.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PEX8714-AB80BI 적합 용도: 6 애플리케이션s: Multi-Host Server Backplane, Storage System Aggregation, PCIe Fan-Out Backplane, Communications Platform Interconnect, Peer-to-Peer Compute Fabric, High-Bandwidth PCIe Expansion.
Multi-Host Server Backplane
The PEX8714-AB80BI fits server backplanes requiring several host-to-endpoint PCIe paths within one switching fabric. Its 12 lanes, 5 ports, and 8.0 GT/s Gen 3 operation provide a defined bandwidth structure for processors, accelerators, and I/O devices while retaining non-blocking traffic paths. Multi-root support lets each host maintain a logical PCIe relationship with its assigned endpoint. Designers should validate lane assignment, reference-clock distribution, power sequencing, and all receiver-buffer margins against the Broadcom PEX8714 documentation before releasing the backplane.
추천
Storage System Aggregation
The PEX8714-AB80BI is suitable for storage systems that aggregate PCIe connectivity behind multiple compute or controller domains. Its five switch ports and 12 lanes can support scalable fan-out and aggregation topologies at the 8.0 GT/s Gen 3 rate, while the non-blocking fabric helps concurrent transfers avoid shared-port bottlenecks. The key design requirement is preserving a clean reference clock and matched differential-pair routing across the dense 324-FCBGA footprint. Storage engineers should also test the intended port configuration, reset behavior, and system-level hot-plug or power-management requirements.
추천
PCIe Fan-Out Backplane
A five-port PCIe fan-out architecture based on the PEX8714-AB80BI can route one host toward multiple endpoint resources through a 12-lane, Gen 3 switching device. The 8.0 GT/s rate provides the defining electrical performance for each active lane, and the non-blocking switch structure supports concurrent traffic better than a simple shared passive interconnect. Board designers must allocate the device’s 324 balls correctly, provide suitable power planes, and maintain high-quality PCIe differential routing. Firmware and operating-system support for the selected topology must also be confirmed before production deployment.
추천
Communications Platform Interconnect
The PEX8714-AB80BI supports communications platforms requiring multiple hosts and endpoints to exchange PCIe traffic through a non-blocking fabric. Its 5-port, 12-lane configuration is appropriate for scalable peer-to-peer or aggregation arrangements at the PCI Express Gen 3 rate of 8.0 GT/s. In these systems, reference-clock quality and deterministic routing become as important as raw lane count because communication equipment may impose strict latency and availability requirements. Signal-integrity simulations, power-integrity checks, and platform-level PCIe compliance testing are recommended before integrating the 19 mm by 19 mm FCBGA device.
추천
Peer-to-Peer Compute Fabric
The Broadcom PEX8714-AB80BI can provide switching infrastructure for peer-to-peer arrangements in which multiple compute domains communicate with dedicated endpoint devices. Its multi-root capability, five ports, and 12 lanes make the device appropriate for systems requiring controlled PCIe paths instead of ad hoc point-to-point routing. At 8.0 GT/s per Gen 3 lane, the switch can serve high-throughput processor, accelerator, or network-interface connections. Platform architects should define lane ownership and peer-access rules, then verify boot ordering, clock stability, and firmware support for the final topology.
추천
High-Bandwidth PCIe Expansion
The PEX8714-AB80BI can be used in high-bandwidth expansion systems where a central PCIe switch distributes connectivity among several downstream cards or modules. Five ports and 12 lanes provide enough topology flexibility for fan-out or aggregation, while Gen 3 operation establishes an 8.0 GT/s per-lane signaling rate. Compared with point-to-point routing, the switched architecture simplifies host access to multiple resources but introduces package, power, clocking, and validation complexity. Expansion-board designers should use the manufacturer’s reference layout and ball-map guidance to control escape routing and maintain signal integrity around the 324-FCBGA device.
추천
추천 제품 요약
엔지니어링 참조 데이터: PEX8714-AB80BI — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PEX8714-AB80BBIG |
|---|---|---|
| Manufacturer | Broadcom | Broadcom |
| Package | 324-FCBGA (19x19) | 324-FCBGA (19x19) |
| PCI Express Generation | Gen 3 | Gen 3 |
| PCI Express Data Rate | 8.0 GT/s | 8.0 GT/s |
| Lane Count | 12 lanes | 12 lanes |
| Port Count | 5 ports | 5 ports |
| Architecture | Multi-root, non-blocking | Multi-root, non-blocking |
| Target Applications | Servers, storage systems, communications platforms, fan-out, aggregation, peer-to-peer | Servers, storage systems, communications platforms, fan-out, aggregation, peer-to-peer |
주요 차별점
- Defined multi-host PCIe switching bandwidth (vs PEX8714-AB80BBIG)
- Non-blocking multi-root fabric for server and storage topologies (vs PEX8714-AB80BBIG)
- High-density board integration in an established FCBGA footprint (vs PEX8714-AB80BBIG)
설계 노트
Treat the 324-FCBGA escape routing as a major layout constraint. Follow the Broadcom package drawing and reference layout for ball assignment, solder-mask definition, via arrays, and layer transitions. Keep high-speed PCIe differential pairs continuous and length matched, and avoid placing disruptive power or digital routing between a transmit pair and its receiver counterpart. PCB fabrication and assembly capability should be checked against the package’s ball pitch and thermal requirements before schematic signoff.
Validate every PCIe Gen 3 receive margin with the actual connector, connector-to-controller, and board-level channel geometry. The switch operates at 8.0 GT/s, so loss, skew, crosstalk, reference-plane transitions, and clock jitter must be included in channel simulation. Use the manufacturer’s ball and reference-clock assignments as the electrical starting point rather than inferring a generic PCIe pinout from the package position.
Partition the PEX8714-AB80BI supply network by the voltage domains and current requirements defined in the manufacturer documentation. Keep high-frequency decoupling close to the associated balls, provide low-impedance distribution planes, and control return-current paths beneath high-speed lanes. Power-up and power-down sequencing should be verified across worst-case startup conditions. The available product brief does not state the supply-voltage values, so those requirements must be taken directly from the detailed manufacturer documentation before component selection is finalized.
Do not assume that a device with the same family name or body size is automatically interchangeable. A valid drop-in decision requires confirmation of the 324-ball map, supply pins, reference-clock connections, lane assignments, configuration method, reset behavior, and platform firmware. For PEX8714-AB80BBIG, compare those details against the selected ordering code and the intended system configuration before approving it as a substitution.
규정 준수 정보
The available component listing identifies the PEX8714-AB80BI G as RoHS. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification details are not stated.