PIC16C67-04/PT - 8-bit MCU, 14KB OTP, 4MHz, 44-TQFP | Microchip
부품 번호: PIC16C67-04/PT ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.5 | $7.50 |
| 10 | $6.85 | $68.50 |
| 100 | $6.1 | $610.00 |
| 500 | $5.4 | $2,700.00 |
| 1,000 | $4.85 | $4,850.00 |
PIC16C67-04/PT 개요
What is a microcontroller? A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, working RAM, I/O peripherals, and timers. Within the broader taxonomy it sits between microprocessors and system-on-chips (SoCs); an 8-bit MCU like the PIC16C67 trades absolute throughput for deterministic behavior, low cost, and ultra-low power draw. The PIC16C6x family in particular uses Harvard architecture with separate program and data buses, RISC instruction set, and OTP/EPROM/ROM program memory options. This makes MCUs like the PIC16C67-04/PT suitable for embedded control tasks where reliability and simplicity outweigh raw compute.
Key features include 14KB EPROM program memory (8K x 14 word width), 368 bytes of data RAM, 33 I/O pins across five ports, three timers, a USART, an MSSP module supporting SPI and I2C, an 8-bit ADC with 8 channels, and a watchdog timer. The /04 speed grade designates a 4 MHz maximum oscillator input, while the /PT suffix indicates the 44-pin TQFP (Thin Quad Flat Pack) package delivered in tray packaging. Pin count and memory size make this device one of the largest members of the PIC16C6x generation.
Architecturally, the PIC16C67 uses a 14-bit instruction word and a 35-instruction RISC set, allowing most instructions to execute in a single clock cycle (250 ns at 4 MHz). The Harvard bus separates program fetches from data accesses so the CPU can pre-fetch the next instruction while reading data, improving throughput without pipelining. Brown-out reset (BOR), power-on reset (POR), and the watchdog timer provide robustness in electrically noisy industrial environments.
Typical applications include industrial control subsystems, automotive body and chassis electronics (pre-CAN era designs), HVAC controls, appliance controllers, instrumentation front-ends, and embedded sensor conditioning where 33 I/O lines, three timers, and a built-in ADC reduce external component count. Designers also use it for upgrading legacy 8051 designs that need simpler firmware and lower power.
When designing with this part, plan for OTP programming: firmware bugs cannot be patched in-circuit, so emulator or windowed-ceramic-DIP samples should be used for development. Decoupling caps (0.1 uF plus 10 uF bulk) should be placed within 5 mm of VDD/VSS pins. Because the device is in a legacy product family, check Microchip's lifecycle page before committing to a long-life program.
드롭인 대체품: PIC16C67-04/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16C67-04/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Timers, Core Architecture, Instruction Cycle Time, Communication Peripherals.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC16C66-04/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16C67-10I/PT
✅ 드롭인✓ 재고 있음
$5.1 / 개
데이터시트 보기 →PIC16C66-10I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16C65B-04I/PT
✅ 드롭인✓ 재고 있음
$7.1 / 개
데이터시트 보기 →PIC16F877-04/PT
✅ 드롭인✓ 재고 있음
$5.2 / 개
데이터시트 보기 →PIC16C67-04/PT 최대 정격 & 전기적 특성
| Core Architecture | 8-bit RISC, PIC16C mid-range |
| Instruction Set | 35 instructions, 14-bit word |
| Program Memory | 14 KB (8K x 14) OTP EPROM |
| Data RAM | 368 bytes |
| I/O Pins | 33 |
| 최대 클록 주파수 | 4 MHz (04 speed grade) |
| Instruction Cycle Time | 250 ns at 4 MHz |
| Supply Voltage (VDD) | 2.5 V to 6.0 V |
| Oscillator Type | External |
| Timers | 3 (Timer0, Timer1, Timer2) |
| Communication Peripherals | USART, MSSP (SPI/I2C) |
| ADC | 8-bit, 8 channels |
| Watchdog Timer | Yes |
| Brown-out Reset | Yes |
| 패키지 | 44-pin TQFP (PT) |
| 동작 온도 | 0C to +70C (Commercial) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| Lead Free / RoHS | May not be RoHS compliant (legacy OTP) |
| Packaging | Tray |
PIC16C67-04/PT 핀 구성
| 핀 1 | OSC1/CLKIN — Oscillator input or external clock input |
| 핀 2 | OSC2/CLKOUT — Oscillator output or clock output |
| 핀 3 | MCLR — Master Clear (reset) input, active low |
| 핀 4 | RA0/AN0 — Port A bit 0 / ADC channel 0 |
| 핀 5 | RA1/AN1 — Port A bit 1 / ADC channel 1 |
| 핀 6 | RA2/AN2/VREF- — Port A bit 2 / ADC channel 2 / VREF- |
| 핀 7 | RA3/AN3/VREF+ — Port A bit 3 / ADC channel 3 / VREF+ |
| 핀 8 | RA4/T0CKI — Port A bit 4 / Timer0 clock input |
| 핀 9 | RA5/SS/AN4 — Port A bit 5 / SPI slave select / ADC channel 4 |
| 핀 10 | VSS — Ground reference |
| 핀 11 | VDD — Positive supply voltage |
| 핀 12 | RB0/INT — Port B bit 0 / External interrupt input |
| 핀 13 | RB1 — Port B bit 1 |
| 핀 14 | RB2 — Port B bit 2 |
| 핀 15 | RB3 — Port B bit 3 |
| 핀 16 | RB4 — Port B bit 4 |
| 핀 17 | RB5 — Port B bit 5 |
| 핀 18 | RB6/PGC — Port B bit 6 / ICSP clock |
| 핀 19 | RB7/PGD — Port B bit 7 / ICSP data |
| 핀 20 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator output / clock input |
| 핀 21 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator input / CCP2 |
| 핀 22 | RC2/CCP1 — Port C bit 2 / Capture/Compare/PWM 1 |
| 핀 23 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| 핀 24 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| 핀 25 | RC5/SDO — Port C bit 5 / SPI data out |
| 핀 26 | RC6/TX/CK — Port C bit 6 / USART TX / clock |
| 핀 27 | RC7/RX/DT — Port C bit 7 / USART RX / data |
| 핀 28 | VSS — Ground reference |
| 핀 29 | VDD — Positive supply voltage |
| 핀 30 | RD0 — Port D bit 0 |
| 핀 31 | RD1 — Port D bit 1 |
| 핀 32 | RD2 — Port D bit 2 |
| 핀 33 | RD3 — Port D bit 3 |
| 핀 34 | RD4 — Port D bit 4 |
| 핀 35 | RD5 — Port D bit 5 |
| 핀 36 | RD6 — Port D bit 6 |
| 핀 37 | RD7 — Port D bit 7 |
| 핀 38 | RE0/RD/AN5 — Port E bit 0 / read control / ADC channel 5 |
| 핀 39 | RE1/WR/AN6 — Port E bit 1 / write control / ADC channel 6 |
| 핀 40 | RE2/CS/AN7 — Port E bit 2 / chip select / ADC channel 7 |
| 핀 41 | VSS — Ground reference |
| 핀 42 | VDD — Positive supply voltage |
| 핀 43 | NC — Not connected (per datasheet) |
| 핀 44 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
PIC16C67-04/PT 적합 용도: 7 애플리케이션s: Industrial Control Subsystems, Appliance Control Boards, HVAC Controllers, Instrumentation Front-Ends, Automotive Body Electronics (Legacy), Sensor Conditioning and Data Acquisition, Embedded Control Upgrades (8051 Replacement).
Industrial Control Subsystems
The PIC16C67-04/PT fits industrial control subsystems because its 33 digital I/O lines, 8-channel 8-bit ADC, three timers, and USART cover the typical sensor-fan-in plus actuator-fan-out mix found on PLC remote I/O cards and machine controllers. The wide 2.5V to 6.0V supply tolerates 5V-rail ripple from motor drivers, and brown-out reset plus watchdog timer keep the controller deterministic across long factory shifts. Place the part on a multi-layer PCB with 0.1 uF plus 10 uF decoupling and you get a robust 4 MHz control plane with 14KB of EPROM-resident ladder or state-machine logic.
추천
Appliance Control Boards
White-goods appliances (washing machines, dishwashers, refrigerators) are an ideal application for the PIC16C67-04/PT. The OTP EPROM secures the firmware against reverse engineering, the 33 I/O drive relays and triacs directly through optocouplers, and the integrated ADC reads temperature, water level, and motor current sensors. The 4 MHz instruction rate gives 1 MIPS performance, more than enough for sequence controllers running C or assembly state machines. Brown-out reset prevents EEPROM corruption in the appliance's power-down brown-out window.
추천
HVAC Controllers
Heating, ventilation, and air-conditioning controllers benefit from the PIC16C67-04/PT's extended commercial and industrial temperature grades, 14KB OTP for complex scheduling firmware, and the 8-channel ADC for reading multiple temperature zones. USART links to indoor/outdoor unit communication, while MSSP supports I2C temperature sensors. The 44-TQFP package is small enough to fit behind a thermostat display. OTP also locks the calibration constants against field tampering.
추천
Instrumentation Front-Ends
Portable test and measurement instruments such as handheld multimeters and bench-top panel meters use the PIC16C67-04/PT as the display-and-keypad controller. The 33 I/O drive LCD segments directly, the ADC digitizes the analog front-end, and the USART streams readings to a host PC. The fully static CMOS design draws microamps in sleep mode, extending battery life on field instruments. OTP program memory prevents accidental firmware overwrite during ESD events.
추천
Automotive Body Electronics (Legacy)
Pre-CAN-era automotive body controllers (window lift, mirror adjust, seat control modules) used the PIC16C67-04/PT because its 33 I/O drive H-bridges and lamp drivers, the ADC monitors current, and the watchdog catches supply transients during cranking. The OTP locks the OEM calibration. Newer designs should migrate to PIC16F877-I/PT for Flash and CAN, but for service replacements the PIC16C67-04/PT in the same 44-TQFP footprint remains a valid maintenance part.
추천
Sensor Conditioning and Data Acquisition
Multi-channel data-acquisition front-ends pair the PIC16C67-04/PT with external signal conditioning. The integrated 8-bit ADC with 8 channels handles 8 sensors natively, and the MSSP drives SPI or I2C ADCs for higher-resolution systems. USART streams the digitized readings to a host controller or display. At 4 MHz the CPU reads and averages the channels without CPU loading, leaving headroom for linearization math in firmware.
추천
Embedded Control Upgrades (8051 Replacement)
Engineers migrating from 8-bit 8051 designs often select the PIC16C67-04/PT as the upgrade target. The 35-instruction RISC set is easier to learn than the 8051's 256-opcode CISC set, the 14KB OTP holds more code than most legacy 8051 ROMs, and the 33 I/O outnumber typical 8051 port counts. Same-package 44-TQFP drop-in compatibility means existing PCBs can host the PIC after firmware porting, typically a 20-30% code-size reduction on C-compiled output.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16C67-04/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16C66-04/PT | PIC16C67-10I/PT | PIC16C66-10I/PT | PIC16C65B-04I/PT | PIC16F877-04/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin TQFP (PT) | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same |
| Program Memory | 14 KB OTP EPROM | 8 KB OTP (-43%) | 14 KB OTP (same) | 8 KB OTP (-43%) | 7 KB OTP (-50%) | 14 KB Flash (reprogrammable) |
| RAM | 368 bytes | 368 bytes | 368 bytes | 368 bytes | 192 bytes (-48%) | 368 bytes |
| Maximum Clock | 4 MHz | 4 MHz | 10 MHz (+150%) | 10 MHz (+150%) | 4 MHz | 4 MHz |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash |
| Supply Voltage | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.0 V to 5.5 V |
주요 차별점
- Largest memory in PIC16C6x family (vs PIC16C66-04/PT)
- Drop-in 10 MHz upgrade path (vs PIC16C67-10I/PT)
- Pin-compatible with Flash successor (vs PIC16F877-04/PT)
설계 노트
Place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pin pair (pins 11/10, 29/28, 42/41), plus a single 10 uF bulk capacitor near the MCLR pin. The PIC16C67-04/PT can source/sink up to 25 mA per I/O pin (100 mA max per port, 200 mA total). Brown-out reset must be enabled in the configuration word to ensure a clean start when the rail dips below the BOR threshold, especially in industrial 24V-derived supply chains.
Because the PIC16C67-04/PT uses OTP EPROM, firmware bugs cannot be patched in-circuit. Develop on a windowed-ceramic DIP sample (PIC16C67-04/JW) or use the MPLAB ICE emulator with a TQFP adapter, and only commit production code to OTP parts after full validation. Estimate: a single OTP run takes 4-6 weeks including fab lot, so plan firmware freeze at least 8 weeks before production ramp.
Route the 4 MHz crystal traces (OSC1/OSC2, pins 1-2) short and symmetric, with the load capacitors (typically 22-33 pF) within 3 mm of the package. Keep the crystal away from high-di/dt traces such as relay coil drivers or PWM outputs on the same PCB. The 44-pin TQFP has a thermal pad that should be soldered to a grounded copper pour to reduce the junction-to-ambient thermal resistance, although the part rarely dissipates more than 200 mW at 4 MHz.
The PIC16C67-04/PT USART and MSSP pins share Port C with the parallel I/O. When using SPI or I2C, set the TRISC bits appropriately to avoid contention. The MSSP supports both 100 kHz Standard-mode and 400 kHz Fast-mode I2C; pull-up resistors on SDA/SCL (typically 4.7 k at 5V, 2.2 k at 3.3V) must be sized for the bus capacitance. For USART communication at 9600 baud or higher, enable the BRGH bit for reduced baud-rate error.
규정 준수 정보
RoHS and lead-free status not explicitly stated in the verified web data; the PIC16C6x family is a legacy OTP generation and many date codes predate RoHS. AEC-Q100 qualification not stated - choose PIC16F variants with automotive qualification for vehicle applications. Verify compliance via the supplier CoC for specific date codes.