PIC16HV540-04I/SO - 4MHz 8-bit MCU w/ Voltage Regulator | Microchip
부품 번호: PIC16HV540-04I/SO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.95 | $2.95 |
| 10 | $2.65 | $26.50 |
| 100 | $2.3 | $230.00 |
| 500 | $1.99 | $995.00 |
| 1,000 | $1.78 | $1,780.00 |
PIC16HV540-04I/SO 개요
An 8-bit PIC microcontroller is a Harvard-architecture CMOS device using a reduced instruction set (RISC) tuned for embedded control. It belongs to the broader category of microcontrollers -> microcontrollers and microprocessors -> semiconductors -> integrated circuits. The "HV" prefix in the part number denotes the integrated high-voltage shunt regulator, eliminating the need for an external 5V LDO when powered from a 9V or 12V rail - a unique feature compared with most PIC16C5x siblings.
Key features include 4MHz maximum clock, 200ns instruction cycle, 12-bit wide opcodes for 2:1 code compression, 8-bit data path, 12 configurable I/O pins sharing bidirectional ports, and an industrial temperature range of -40C to +85C. The integrated voltage regulator also simplifies designs that previously required external Zener or LDO networks.
The PIC16HV540 architecture pairs an EPROM-based program memory with a 7-stage instruction pipeline visible only to the developer through its single-cycle execution model. The 12-bit instruction width combined with full orthogonal addressing eliminates special-purpose accumulator constraints, making the device unusually easy to program given its 33-instruction set.
Typical applications include battery chargers, automotive subsystems, industrial control logic, simple timer/counter replacements, and any embedded node previously built around discrete 555-style circuitry. The wide supply tolerance supports direct 9V or 12V battery operation.
Designers should budget EPROM programming time and ensure the OTP windowless package suits their production volume - the PIC16F equivalent is recommended for prototype or low-volume runs. The PIC16HV540-04I/SO variant ships in industrial temperature grade.
This page synthesizes distributor pricing, drop-in same-package alternatives (including PIC16HV540-04/SO and PIC16HV540T-04/SO), cross-references and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: PIC16HV540-04I/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16HV540-04I/SO (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Package, Watchdog Timer, Operating Temperature, On-chip Voltage Regulator.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC16HV540-04/SO
✅ 드롭인✓ 재고 있음
$2.1 / 개
데이터시트 보기 →PIC16HV540T-04/SO
✅ 드롭인✓ 재고 있음
$1.2 / 개
데이터시트 보기 →PIC16HV540-04I/SO 최대 정격 & 전기적 특성
| Core Architecture | Enhanced PIC16C54 (8-bit RISC) |
| Program Memory Type | OTP (One-Time Programmable EPROM) |
| Program Memory Size | 768B (512 x 12) |
| RAM Size | 25 B |
| 최대 클록 주파수 | 4 MHz |
| Instruction Cycle | 200 ns |
| Number of Instructions | 33 single-word |
| I/O Pins | 12 |
| Supply Voltage Range | 3.5 V to 15 V |
| On-chip Voltage Regulator | Yes (shunt type) |
| 동작 온도 범위 | -40 C to +85 C (Industrial) |
| 패키지 | 18-pin SOIC (SO) |
| 실장 유형 | Surface Mount |
| Data EEPROM | None (OTP only) |
| RoHS 상태 | Compliant |
PIC16HV540-04I/SO 핀 구성
| 핀 1 | RA2 — Bidirectional I/O pin / analog input |
| 핀 2 | RA3 — Bidirectional I/O pin / analog input |
| 핀 3 | T0CKI — Timer0 clock input |
| 핀 4 | MCLR — Master Clear (reset) input, active low |
| 핀 5 | VSS — Ground reference |
| 핀 6 | RB0 — Bidirectional I/O pin |
| 핀 7 | RB1 — Bidirectional I/O pin |
| 핀 8 | RB2 — Bidirectional I/O pin |
| 핀 9 | RB3 — Bidirectional I/O pin |
| 핀 10 | RB4 — Bidirectional I/O pin |
| 핀 11 | RB5 — Bidirectional I/O pin |
| 핀 12 | RB6 — Bidirectional I/O pin |
| 핀 13 | RB7 — Bidirectional I/O pin |
| 핀 14 | VDD — Positive supply (regulated internally) |
| 핀 15 | OSC2 — Oscillator output / clock out |
| 핀 16 | OSC1 — Oscillator input / external clock |
| 핀 17 | RA0 — Bidirectional I/O pin / analog input |
| 핀 18 | RA1 — Bidirectional I/O pin / analog input |
일반적인 애플리케이션
PIC16HV540-04I/SO 적합 용도: 6 애플리케이션s: Battery-Powered Industrial Sensors, Automotive 12V Accessory Controllers, Smart Home Wireless Sensor Nodes, Appliance Timer and Control Logic, Replacement of Discrete 555 Timer Circuits, Educational and Hobby Electronics.
Battery-Powered Industrial Sensors
The PIC16HV540-04I/SO is well-suited for battery-powered industrial sensor nodes because its integrated on-chip shunt voltage regulator accepts a wide 3.5V to 15V input range. This lets a 9V or 12V battery feed the MCU directly without an external LDO. The 4MHz core and 200ns instruction cycle handle periodic sensor sampling, threshold comparisons and sleep-mode wakeups efficiently, while the 12 I/O pins interface directly to analog front-ends, comparators and digital sensor buses. The 25B RAM and 768B OTP are sufficient for state-machine logic, calibration tables and tiny protocol stacks.
추천
Automotive 12V Accessory Controllers
The PIC16HV540-04I/SO integrates cleanly into automotive 12V accessory controllers where raw battery voltage can swing from 9V cranking transients to 16V load-dump spikes. The on-chip shunt regulator absorbs this wide range without an external pre-regulator, reducing BOM cost and PCB area. With 12 I/O pins, the MCU can directly drive relay coils, MOSFET gates, status LEDs and switch inputs. The industrial -40C to +85C temperature grade handles under-dash thermal environments.
추천
Smart Home Wireless Sensor Nodes
For smart-home sensor endpoints, the PIC16HV540-04I/SO provides a low-cost deterministic control core that wakes on interrupt, reads a sensor, applies threshold logic and returns to sleep. With 25B of RAM and 768B of OTP, it accommodates compact state-machine firmware for occupancy, door/window or environmental sensors. The integrated regulator simplifies direct 9V battery packs, while 12 I/O pins reserve budget for an SPI-attached RF transceiver (such as the Microchip MRF24J40 family) or a sub-GHz transmitter.
추천
Appliance Timer and Control Logic
The PIC16HV540-04I/SO is ideal for white-goods timer and control applications such as dishwasher cycle controllers, washing-machine front panels, and microwave user-interface logic. Its 33-instruction RISC core is simple enough for firmware engineers to develop and maintain without complex toolchains, and the 12 I/O pins comfortably drive 7-segment displays, keypads, buzzer drivers and triac control lines. The on-chip shunt regulator eliminates the external 5V LDO normally required when tapping a 12V or 15V appliance rail.
추천
Replacement of Discrete 555 Timer Circuits
The PIC16HV540-04I/SO is frequently used to replace legacy 555-timer-based discrete circuits where multiple timing channels or programmable behaviour is needed. With its 4MHz core and deterministic single-cycle execution, it can synthesize multiple software timers, PWM outputs and event counters that would otherwise require a forest of resistors, capacitors and comparators. The 12 I/O pins support multiple output channels and trigger inputs, while the wide 3.5V to 15V supply tolerance matches existing 555 designs without modification.
추천
Educational and Hobby Electronics
For educational and hobbyist projects, the PIC16HV540-04I/SO offers an approachable entry point to the PIC microcontroller family. The 33-instruction RISC core is one of the easiest to learn, and the 18-SOIC package is breadboard-friendly with an SOIC-to-DIP adapter. With its integrated voltage regulator, students can power the part from a 9V battery without any extra regulation, simplifying lab exercises in embedded programming, I/O control and timer/counter concepts. The PIC16HV540/JW windowed CERDIP variant is often used for development and erase/reprogram cycles.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16HV540-04I/SO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16HV540-04/SO | PIC16HV540T-04/SO |
|---|---|---|---|
| Package | 18-SOIC | 18-SOIC - same | 18-SOIC - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz |
| Program Memory | 768B (512x12) OTP | 768B (512x12) OTP | 768B (512x12) OTP |
| RAM | 25 B | 25 B | 25 B |
| I/O Pins | 12 | 12 | 12 |
| Supply Voltage Range | 3.5 V to 15 V | 3.5 V to 15 V | 3.5 V to 15 V |
| Operating Temperature | -40 C to +85 C (Industrial) | 0 C to +70 C (Commercial) | -40 C to +85 C (Industrial) |
| Packaging | Tube | Tube | Tape & Reel |
| On-chip Voltage Regulator | Yes (shunt) | Yes (shunt) | Yes (shunt) |
주요 차별점
- Integrated on-chip shunt voltage regulator (vs PIC16C54-I/SO)
- Industrial -40C to +85C temperature range (vs PIC16HV540-04/SO)
- 33 single-cycle instructions (vs PIC16F54-I/SO)
설계 노트
Estimated: The PIC16HV540-04I/SO internal shunt regulator must be supplied through a current-limiting resistor when VIN exceeds the internal regulated VDD. Per Microchip datasheet DS40197B, use a resistor sized so that the regulator bias current stays within the recommended range (typically 1-10mA through the regulator) at the minimum expected VIN. At VIN = 12V and 5mA bias current, a series resistor of approximately 1.4kohm is typical; verify against the application's minimum supply voltage.
Place the 0.1uF VDD decoupling capacitor as close as possible to pin 14 of the SOIC-18 package, with the ground return tied directly to pin 5 (VSS) through a short trace. Per Microchip layout guidelines, keep oscillator traces (OSC1/OSC2, pins 15-16) short and shielded, and route the MCLR pull-up (pin 4) away from high-noise switching nodes. Avoid running digital signal traces directly under the SOIC package to minimize crosstalk on the analog-capable RA pins.
The PIC16HV540-04I/SO uses OTP (One-Time Programmable) memory - once programmed it cannot be erased. For prototype or development cycles, use the PIC16HV540/JW windowed CERDIP variant or migrate to the PIC16F54 (Flash) family. Also note that all 12 I/O pins are bidirectional with weak internal pull-ups; high-current loads (above the per-pin source/sink ratings in the datasheet) require external drivers such as the ULN2003 or TC4420.
The SOIC-18 package has a thermal resistance theta_JA of approximately 100 C/W on a standard 4-layer JEDEC test board. At an ambient of +85C industrial maximum, the maximum allowable internal dissipation is roughly 400mW before the junction temperature reaches +125C. The PIC16HV540's typical 4MHz operating current is only a few mA, so thermal concerns are minimal for normal digital-only operation.
규정 준수 정보
RoHS and REACH compliant per Microchip product page; lead-free matte-tin plating. Not AEC-Q100 qualified - the PIC16HV540 family targets industrial and consumer applications, not automotive.