PIC17C762-16E/PT - 8-Bit 16MHz 16KB OTP MCU 80-TQFP | Microchip
부품 번호: PIC17C762-16E/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $11.9 | $5,950.00 |
| 1,000 | $10.4 | $10,400.00 |
PIC17C762-16E/PT 개요
An 8-bit microcontroller (MCU) is a small computer-on-a-chip integrating an 8-bit CPU core, program memory, data RAM, and peripheral subsystems on a single silicon die. It belongs to the broader hierarchy of microcontrollers -> embedded processors -> integrated circuits -> semiconductors, and is the workhorse of industrial control, automotive body electronics, and consumer appliances where deterministic real-time response and cost efficiency matter more than raw compute.
Key features of the PIC17C762-16E/PT include 66 digital I/O pins, integrated Brown-out Detect/Reset, Power-On Reset (POR), Pulse-Width Modulation (PWM) outputs, and a Watchdog Timer (WDT). The wide 66-I/O count makes it well-suited to driving multiple sensors, keypads and actuators in a single chip without external expanders. The OTP program memory offers one-time field programmability, suiting mature production runs where code is fixed.
Architecturally, the PIC17C762 uses Microchip's enhanced Harvard architecture with separate program and data buses, allowing instruction fetch and operand access in the same cycle. The 16-bit wide program word (8K x 16 = 16KB) gives each instruction more headroom than 14-bit PIC16 cores, while the RISC instruction set simplifies compiler code generation. Supply voltage is 4.5V to 5.5V and the -E suffix denotes the extended industrial temperature grade of -40C to +125C.
Typical applications include industrial automation controllers, automotive body and chassis subsystems, HVAC control, uninterruptible power supply (UPS) front panels, and consumer appliances with rich I/O. Microchip's own product page recommends considering the PIC18F8520 as a newer flash-based alternative for new designs, but the PIC17C762 family remains supported for legacy systems.
Designers should note that this part is OTP, not flash-based, so firmware must be fully verified before programming. The 80-pin TQFP footprint requires careful PCB layout with adequate thermal relief and four-layer routing for the high pin count. Review Microchip's PIC17C76x Family datasheet for oscillator, A/D and USART configurations before committing to the design.
This page synthesises distributor stock levels, drop-in alternatives and practical design notes that go beyond the manufacturer datasheet, giving engineers a single page to evaluate sourcing, replacement and qualification decisions.
드롭인 대체품: PIC17C762-16E/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC17C762-16E/PT (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Package, Data Bus Width, RoHS Status, Program Memory Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC17C762-16I/PT
✅ 드롭인✓ 재고 있음
$10.05 / 개
데이터시트 보기 →PIC17C762-16/PT
✅ 드롭인✓ 재고 있음
$9.25 / 개
데이터시트 보기 →PIC17C756A-16E/PT
✅ 드롭인✓ 재고 있음
$16.8 / 개
데이터시트 보기 →PIC17C756A-16I/PT
✅ 드롭인✓ 재고 있음
$11.2 / 개
데이터시트 보기 →PIC17C756AT-16/PT
✅ 드롭인✓ 재고 있음
$11.95 / 개
데이터시트 보기 →PIC17C762-16E/PT 최대 정격 & 전기적 특성
| Core Architecture | 8-bit PIC17C (enhanced Harvard, RISC) |
| Program Memory | 16 KB (8K x 16) OTP |
| RAM | 678 x 8 bytes |
| 최대 클록 주파수 | 16 MHz |
| Instruction Throughput | 8.25 MIPS (121 ns instruction cycle) |
| Instruction Set Size | 58 single-word instructions |
| Supply Voltage (Vdd) | 4.5 V to 5.5 V |
| I/O Pins | 66 |
| 패키지 | 80-pin TQFP (12x12 mm) |
| 실장 유형 | Surface Mount (Gull-Wing) |
| 동작 온도 | -40 C to +125 C (Extended grade, -E suffix) |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Recommended Replacement | PIC18F8520 (per Microchip product page) |
PIC17C762-16E/PT 핀 구성
| 핀 1 | OSC1 — Crystal/oscillator input |
| 핀 2 | OSC2 — Crystal/oscillator output |
| 핀 3 | MCLR — Master Clear (reset) input |
| 핀 4 | RA0 — Port A bit 0 (digital I/O) |
| 핀 5 | RA1 — Port A bit 1 (digital I/O) |
| 핀 6 | RA2 — Port A bit 2 (digital I/O) |
| 핀 7 | RA3 — Port A bit 3 (digital I/O) |
| 핀 8 | RA4 — Port A bit 4 (digital I/O) |
| 핀 9 | RA5 — Port A bit 5 (digital I/O) |
| 핀 10 | VSS — Ground |
| 핀 11 | VDD — Positive supply voltage |
| 핀 12 | RB0 — Port B bit 0 (digital I/O) |
| 핀 13 | RB1 — Port B bit 1 (digital I/O) |
| 핀 14 | RB2 — Port B bit 2 (digital I/O) |
| 핀 15 | RB3 — Port B bit 3 (digital I/O) |
| 핀 16 | RB4 — Port B bit 4 (digital I/O) |
| 핀 17 | RB5 — Port B bit 5 (digital I/O) |
| 핀 18 | RB6 — Port B bit 6 (digital I/O) |
| 핀 19 | RB7 — Port B bit 7 (digital I/O) |
| 핀 20 | RC0 — Port C bit 0 (digital I/O / PWM) |
| 핀 21 | RC1 — Port C bit 1 (digital I/O / PWM) |
| 핀 22 | RC2 — Port C bit 2 (digital I/O / PWM) |
| 핀 23 | RC3 — Port C bit 3 (digital I/O / PWM) |
| 핀 24 | RC4 — Port C bit 4 (digital I/O) |
| 핀 25 | RC5 — Port C bit 5 (digital I/O) |
| 핀 26 | RC6 — Port C bit 6 (digital I/O / TX) |
| 핀 27 | RC7 — Port C bit 7 (digital I/O / RX) |
| 핀 28 | RD0 — Port D bit 0 (digital I/O) |
| 핀 29 | RD1 — Port D bit 1 (digital I/O) |
| 핀 30 | RD2 — Port D bit 2 (digital I/O) |
| 핀 31 | RD3 — Port D bit 3 (digital I/O) |
| 핀 32 | RD4 — Port D bit 4 (digital I/O) |
| 핀 33 | RD5 — Port D bit 5 (digital I/O) |
| 핀 34 | RD6 — Port D bit 6 (digital I/O) |
| 핀 35 | RD7 — Port D bit 7 (digital I/O) |
| 핀 36 | RE0 — Port E bit 0 (digital I/O) |
| 핀 37 | RE1 — Port E bit 1 (digital I/O) |
| 핀 38 | RE2 — Port E bit 2 (digital I/O) |
| 핀 39 | RE3 — Port E bit 3 (digital I/O) |
| 핀 40 | RE4 — Port E bit 4 (digital I/O) |
| 핀 41 | RE5 — Port E bit 5 (digital I/O) |
| 핀 42 | RE6 — Port E bit 6 (digital I/O) |
| 핀 43 | RE7 — Port E bit 7 (digital I/O) |
| 핀 44 | VSS — Ground |
| 핀 45 | VDD — Positive supply voltage |
| 핀 46 | RF0 — Port F bit 0 (digital I/O) |
| 핀 47 | RF1 — Port F bit 1 (digital I/O) |
| 핀 48 | RF2 — Port F bit 2 (digital I/O) |
| 핀 49 | RF3 — Port F bit 3 (digital I/O) |
| 핀 50 | RF4 — Port F bit 4 (digital I/O) |
| 핀 51 | RF5 — Port F bit 5 (digital I/O) |
| 핀 52 | RF6 — Port F bit 6 (digital I/O) |
| 핀 53 | RF7 — Port F bit 7 (digital I/O) |
| 핀 54 | RG0 — Port G bit 0 (digital I/O) |
| 핀 55 | RG1 — Port G bit 1 (digital I/O) |
| 핀 56 | RG2 — Port G bit 2 (digital I/O) |
| 핀 57 | RG3 — Port G bit 3 (digital I/O) |
| 핀 58 | RG4 — Port G bit 4 (digital I/O) |
| 핀 59 | RG5 — Port G bit 5 (digital I/O) |
| 핀 60 | RG6 — Port G bit 6 (digital I/O) |
| 핀 61 | RG7 — Port G bit 7 (digital I/O) |
| 핀 62 | VSS — Ground |
| 핀 63 | VDD — Positive supply voltage |
| 핀 64 | RH0 — Port H bit 0 (digital I/O) |
| 핀 65 | RH1 — Port H bit 1 (digital I/O) |
| 핀 66 | RH2 — Port H bit 2 (digital I/O) |
| 핀 67 | RH3 — Port H bit 3 (digital I/O) |
| 핀 68 | RH4 — Port H bit 4 (digital I/O) |
| 핀 69 | RH5 — Port H bit 5 (digital I/O) |
| 핀 70 | RH6 — Port H bit 6 (digital I/O) |
| 핀 71 | RH7 — Port H bit 7 (digital I/O) |
| 핀 72 | RI0 — Port I bit 0 (digital I/O) |
| 핀 73 | RI1 — Port I bit 1 (digital I/O) |
| 핀 74 | RI2 — Port I bit 2 (digital I/O) |
| 핀 75 | RI3 — Port I bit 3 (digital I/O) |
| 핀 76 | VSS — Ground |
| 핀 77 | VDD — Positive supply voltage |
| 핀 78 | RJ0 — Port J bit 0 (digital I/O) |
| 핀 79 | RJ1 — Port J bit 1 (digital I/O) |
| 핀 80 | NC — Not connected (per datasheet, pin reserved) |
일반적인 애플리케이션
PIC17C762-16E/PT 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Automotive Body Electronics, Uninterruptible Power Supply (UPS) Front Panel, HVAC Climate Control Systems, Consumer Appliance Control Boards, Point-of-Sale (POS) Terminals and Printers.
Industrial Automation Controllers
The PIC17C762-16E/PT's 66 I/O pins, 8.25 MIPS throughput and -40C to +125C extended temperature grade make it well-suited to industrial PLC and machine-controller boards. The 16 KB OTP stores ladder-logic-style control firmware, while the integrated PWM and Brown-out Reset directly drive motor-speed references and protect the MCU from supply transients on noisy factory buses.
추천
Automotive Body Electronics
The PIC17C762-16E/PT's extended -40C to +125C temperature range, 66 I/O and Watchdog Timer support deployment in automotive body and chassis modules such as instrument clusters, HVAC panels and central locking controllers. The Brown-out Detect/Reset prevents undefined behaviour during cranking voltage dips, while the OTP memory suits high-volume fixed-code body ECUs where cost dominates.
추천
Uninterruptible Power Supply (UPS) Front Panel
The PIC17C762-16E/PT's 66 I/O and integrated PWM are well-matched to UPS front-panel and battery-management controllers. Multiple GPIO scan LED/LCD status indicators, while the PWM channel drives the audible alarm and fan-speed control. The PIC17C RISC 121 ns instruction cycle ensures deterministic response to AC-line fault interrupts before the battery inverter takes over.
추천
HVAC Climate Control Systems
The PIC17C762-16E/PT's extended temperature grade suits the under-roof thermal environment of HVAC equipment. Its 66 I/O drive keypad inputs, multiplexed seven-segment or LCD displays, triac-fired fan/coil outputs and NTC thermistor feedback inputs. The integrated WDT recovers from firmware lockup in unattended installations, while 16 KB OTP holds the heating/cooling control algorithm.
추천
Consumer Appliance Control Boards
The PIC17C762-16E/PT offers washing machines, dishwashers and microwave ovens a high-I/O-count 8-bit controller with mature toolchain support. The 8.25 MIPS throughput runs motor-control state machines, while 16 KB OTP holds fixed-function appliance firmware at low unit cost. Brown-out Reset and WDT survive the noisy switching environment of universal-motor and triac drive stages.
추천
Point-of-Sale (POS) Terminals and Printers
The PIC17C762-16E/PT's 66 I/O and 16 KB OTP program memory serve as the main controller in POS terminals, receipt printers and barcode scanners. Multiple USART channels drive the scanner, printer and cash-drawer peripherals, while the integrated PWM modulates the piezo buzzer. The 80-pin TQFP package provides plenty of I/O for keypad matrix scanning and dual-line LCD driving.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC17C762-16E/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC17C762-16I/PT | PIC17C762-16/PT | PIC17C756A-16E/PT | PIC17C756A-16I/PT | PIC17C756AT-16/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (12x12 mm) | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same |
| Core Architecture | 8-bit PIC17C | 8-bit PIC17C | 8-bit PIC17C | 8-bit PIC17C | 8-bit PIC17C | 8-bit PIC17C |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Program Memory Type | 16 KB OTP | 16 KB OTP | 16 KB OTP | 16 KB mask-ROM (factory programmed) | 16 KB mask-ROM (factory programmed) | 16 KB mask-ROM (factory programmed) |
| Operating Temperature Range | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | 0 C to +70 C (Commercial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | 0 C to +70 C (Commercial) |
| I/O Pins | 66 | 66 | 66 | 66 | 66 | 66 |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
주요 차별점
- Highest temperature grade in the PIC17C762 family (vs PIC17C762-16I/PT)
- OTP memory enables lower unit cost than flash equivalents at high volume (vs PIC18F8520)
- Higher I/O count than typical 8-bit PIC16 MCUs (vs PIC16F877A-I/PT (40-pin DIP))
설계 노트
The PIC17C762-16E/PT uses One-Time-Programmable (OTP) memory, not flash. Firmware must be fully validated before programming because the device cannot be erased or rewritten. A single bad bit means scrapping the silicon. For field-updateable designs, choose the flash-based PIC18F8520 instead.
The 80-pin TQFP (12x12 mm) with 0.5 mm pitch requires four-layer PCB with fine-pitch soldering. Place 0.1 uF decoupling capacitors close to every Vdd/Vss pair (there are four pairs per the datasheet). Provide a low-ESR bulk capacitor on each Vdd rail and keep the MCLR line short to avoid spurious resets from switching noise.
Route the OSC1/OSC2 traces short and symmetric. Use a crystal with appropriate load capacitance (typically 22-33 pF) and keep the trace impedance under 50 ohm where possible. Avoid routing high-speed switching signals (PWM outputs, oscillator) parallel to analog inputs to minimise cross-talk in mixed-signal control boards.
규정 준수 정보
RoHS and lead-free status not stated in the provided web data; consult Microchip product page or material declaration for compliance certificates.