PIC17LC43-08/PT - 8KB OTP 8-bit MCU, 33MHz, TQFP-44 | Microchip
부품 번호: PIC17LC43-08/PT ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.8 | $9.80 |
| 10 | $8.95 | $89.50 |
| 100 | $7.8 | $780.00 |
| 500 | $6.95 | $3,475.00 |
| 1,000 | $6.2 | $6,200.00 |
PIC17LC43-08/PT 개요
Background: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, digital I/O, and on-chip peripherals such as timers, UARTs, and A/D converters. The PIC17 family sits between Microchip's baseline PIC12/PIC16 lines and the higher-end PIC18 line, offering RISC performance with a 16-bit instruction word and 8-bit data path. OTP (One-Time Programmable) microcontrollers use EPROM cells that can be electrically written once during production programming, contrasting with flash-based parts that support in-system re-programming.
Key features of the PIC17LC43-08/PT include: 33 MHz maximum clock input with 121 ns instruction cycle, 8 KB OTP program memory, 454 bytes of general-purpose RAM, 33 bidirectional I/O pins, 2.5 V to 5.5 V single-supply operation, and the classic PIC17C43 peripheral set including timers, capture/compare/PWM, and serial I/O. Compared to PIC16F predecessors at the same clock, the 17C43 offers higher throughput and a wider 16-bit instruction word for more efficient code density.
Typical applications include industrial control logic, motor drive signal conditioning, embedded instrumentation, automotive body electronics, and consumer appliance controllers where a TQFP surface-mount package, OTP memory, and PIC17C43 software compatibility are required. The 33 I/O lines allow direct interfacing to keypads, displays, sensors, and power-driver stages without external glue logic.
When designing with this part, plan for OTP programming infrastructure or contract assembly. The TQFP-44 footprint requires careful PCB thermal relief and trace routing for fine-pitch 0.8 mm leads. Designers migrating from PIC16C/PIC16F code should review the PIC17C43 instruction-set differences (16-bit opcode, multi-cycle branches) and revise the linker/startup files accordingly.
드롭인 대체품: PIC17LC43-08/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC17LC43-08/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Program Memory Size, Program Memory Type, Core Architecture, Maximum Clock Frequency.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC17C43-16I/PT
✅ 드롭인✓ 재고 있음
$5.3 / 개
데이터시트 보기 →PIC17C43T-16/PT
✅ 드롭인✓ 재고 있음
$8.7 / 개
데이터시트 보기 →PIC17C43-25E/PT
✅ 드롭인✓ 재고 있음
$10.85 / 개
데이터시트 보기 →PIC17C43T-25I/PQ
✅ 드롭인✓ 재고 있음
$13.5 / 개
데이터시트 보기 →PIC17C44-16I/PT
✅ 드롭인✓ 재고 있음
$4.65 / 개
데이터시트 보기 →PIC17LC43-08/PT 최대 정격 & 전기적 특성
| Architecture | 8-bit PIC17C RISC |
| Instruction Set | 58 single-word instructions |
| Instruction Cycle | 121 ns (single cycle) |
| 최대 클록 주파수 | 33 MHz |
| 데이터 버스 폭 | 16 bit (instruction) / 8 bit (data) |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 8 KB |
| RAM Size | 454 bytes |
| I/O Pins | 33 |
| 공급 전압 | 2.5 V to 5.5 V |
| ROM Type | OTP (One-Time Programmable) |
| 패키지 | TQFP-44 (PT) 10x10 mm |
| Temperature Grade | Commercial |
| Terminal Form | Gull Wing |
| No. of Terminals | 44 |
| 실장 유형 | Surface Mount |
| Life Cycle Stage | Obsolete (legacy part) |
| MIPS Rating | 8.25 MIPS |
PIC17LC43-08/PT 핀 구성
| 핀 1 | RA0/AN0 — Port A bit 0 / analog input 0 |
| 핀 2 | RA1/AN1 — Port A bit 1 / analog input 1 |
| 핀 3 | RA2/AN2 — Port A bit 2 / analog input 2 |
| 핀 4 | RA3/AN3/VREF — Port A bit 3 / analog input 3 / voltage reference |
| 핀 5 | RA4/T0CKI — Port A bit 4 / Timer 0 clock input |
| 핀 6 | RA5/SS — Port A bit 5 / SPI slave select |
| 핀 7 | OSC1/CLKIN — Oscillator input / external clock |
| 핀 8 | OSC2/CLKOUT — Oscillator output |
| 핀 9 | MCLR/VPP — Master clear reset / programming voltage |
| 핀 10 | VSS — Ground reference |
| 핀 11 | VDD — Positive supply voltage |
| 핀 12 | RB0/INT — Port B bit 0 / external interrupt |
| 핀 13 | RB1 — Port B bit 1 |
| 핀 14 | RB2 — Port B bit 2 |
| 핀 15 | RB3 — Port B bit 3 |
| 핀 16 | RB4 — Port B bit 4 |
| 핀 17 | RB5 — Port B bit 5 |
| 핀 18 | RB6/ICSPCLK — Port B bit 6 / ICSP clock |
| 핀 19 | RB7/ICSPDAT — Port B bit 7 / ICSP data |
| 핀 20 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer 1 I/O |
| 핀 21 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer 1 oscillator / CCP2 |
| 핀 22 | RC2/CCP1 — Port C bit 2 / CCP1 PWM output |
| 핀 23 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| 핀 24 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| 핀 25 | RC5/SDO — Port C bit 5 / SPI data out |
| 핀 26 | RC6/TX/CK — Port C bit 6 / UART transmit / clock |
| 핀 27 | RC7/RX/DT — Port C bit 7 / UART receive / data |
| 핀 28 | RD0 — Port D bit 0 |
| 핀 29 | RD1 — Port D bit 1 |
| 핀 30 | RD2 — Port D bit 2 |
| 핀 31 | RD3 — Port D bit 3 |
| 핀 32 | RD4 — Port D bit 4 |
| 핀 33 | RD5 — Port D bit 5 |
| 핀 34 | RD6 — Port D bit 6 |
| 핀 35 | RD7 — Port D bit 7 |
| 핀 36 | RE0/RD — Port E bit 0 / parallel-port read |
| 핀 37 | RE1/WR — Port E bit 1 / parallel-port write |
| 핀 38 | RE2/CS — Port E bit 2 / parallel-port chip select |
| 핀 39 | AVSS — Analog ground |
| 핀 40 | AVDD — Analog positive supply |
| 핀 41 | NC — Not connected (per datasheet) |
| 핀 42 | NC — Not connected (per datasheet) |
| 핀 43 | VSS — Ground reference |
| 핀 44 | VDD — Positive supply voltage |
일반적인 애플리케이션
PIC17LC43-08/PT 적합 용도: 6 애플리케이션s: Industrial Control Logic, Embedded Instrumentation, Motor Drive Signal Conditioning, Consumer Appliance Controllers, Automotive Body Electronics (Legacy), Point-of-Sale Terminal Peripherals.
Industrial Control Logic
The PIC17LC43-08/PT fits industrial control logic boards where deterministic 8-bit execution, OTP security, and a TQFP-44 surface-mount footprint are required. Its 8.25 MIPS throughput at 33 MHz handles PID loops, state machines, and HMI scanning at cycle times under 1 ms, while 33 I/O lines directly drive relays, optocouplers, and keypads without external mux logic. The 2.5 V to 5.5 V supply enables direct interface to 3.3 V sensors and 5 V driver stages, simplifying the power tree on factory-floor PLCs.
추천
Embedded Instrumentation
Bench-top and field instruments benefit from the PIC17LC43-08/PT's compact TQFP-44 package and PIC17C43 peripheral set. The MCU drives character LCDs, scans keypads, and streams measurement data over UART to a host PC, while OTP memory protects calibration tables from field tampering. With 454 bytes of RAM, the device buffers sample streams from external ADCs and supports interrupt-driven acquisition; the 121 ns instruction cycle keeps timing jitter under one microsecond for precision trigger logic.
추천
Motor Drive Signal Conditioning
In small BLDC and stepper motor controllers, the PIC17LC43-08/PT generates PWM, captures Hall-sensor feedback, and sequences commutation in real time. Its 33 I/O lines support 3-phase gate drivers, current-sense amplifiers, and tachometer inputs, while the 8 MIPS core runs vector-control loops at 10 kHz with comfortable margin. The OTP memory locks the motor-control firmware at production, preventing field re-tuning and IP exposure. TQFP-44 mounts cleanly on the driver board alongside the power stage.
추천
Consumer Appliance Controllers
White-goods and small-appliance control boards use the PIC17LC43-08/PT for user-interface scanning, temperature sensing, and load switching. OTP memory suits appliances where firmware is finalized at production and BOM cost is critical, while 2.5 V to 5.5 V operation matches battery-backed and 5 V mains-rectified rails. The 33 I/O lines drive seven-segment displays, touch keypads, triac optos, and buzzer PWM, consolidating what would otherwise require external logic on a single chip.
추천
Automotive Body Electronics (Legacy)
Pre-CAN automotive body modules (window lift, mirror, seat controller) historically used the PIC17LC43-08/PT for its compact TQFP-44 footprint and OTP-secured firmware. With 33 I/O lines, the MCU scans switches, drives small motors, and handles LIN-slave or simple PWM signaling at body-electronics data rates. Note that modern automotive designs require AEC-Q100 qualification, which the legacy PIC17LC43-08/PT does not carry - new designs should migrate to PIC18F or dsPIC33 AEC-Q100 alternatives.
추천
Point-of-Sale Terminal Peripherals
POS peripherals such as barcode scanners, customer displays, and receipt-printer controllers leverage the PIC17LC43-08/PT for keyboard scanning, serial I/O to the host terminal, and OTP-secured firmware storage. The 8.25 MIPS throughput decodes 1D/2D barcode streams in real time, while 33 I/O lines drive LCD modules, piezo buzzers, and indicator LEDs. OTP memory prevents cloning of the peripheral firmware, an important security consideration in retail deployments.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC17LC43-08/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC17C43-16I/PT | PIC17C43T-16/PT | PIC17C43-25E/PT | PIC17C43T-25I/PQ | PIC17C44-16I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-44 (PT) | TQFP-44 (PT) - same | TQFP-44 (PT) - same | TQFP-44 (PT) - same | MQFP-44 (PQ) - same pinout | TQFP-44 (PT) - same |
| Program Memory | 8 KB OTP | 8 KB OTP | 8 KB OTP | 8 KB OTP | 8 KB OTP | 16 KB OTP |
| RAM | 454 bytes | 454 bytes | 454 bytes | 454 bytes | 454 bytes | 454 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V |
| Max Clock Frequency | 8 MHz | 16 MHz | 16 MHz | 25 MHz | 25 MHz | 16 MHz |
| Temperature Grade | Commercial (0C to +70C) | Industrial (-40C to +85C) | Commercial (0C to +70C) | Extended (-40C to +125C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Wide low-voltage supply range 2.5 V to 5.5 V (vs PIC17C43-16I/PT)
- Compact TQFP-44 surface-mount footprint (vs PIC17C43-16I/P (DIP-40))
- Commercial temperature grade optimized for low cost (vs PIC17C43-25E/PT)
설계 노트
The PIC17LC43-08/PT operates from 2.5 V to 5.5 V single supply. Place a 100 nF decoupling capacitor as close as possible to each VDD pin (pins 11 and 44), and a bulk 10 uF tantalum or ceramic on the main supply rail. For analog sections driving AVDD (pin 40), add a separate 100 nF plus 10 uF LC pi-filter to reduce digital switching noise coupling into ADC references. Avoid routing high-current switching traces near the oscillator pins to prevent clock jitter.
The TQFP-44 (PT) package uses 0.8 mm pitch gull-wing leads on a 10x10 mm body. Route all signals on inner layers with micro-vias under the pads to break out the dense perimeter pin field; keep lead-to-pad fillets clear of vias to prevent solder wicking. Expose a continuous ground plane on layer 2 beneath the package to provide thermal spreading and a low-impedance return for the 33 I/O pins. The exposed pad (if any) should be soldered to a copper pour for thermal dissipation.
OTP memory on the PIC17LC43-08/PT cannot be erased or re-programmed; verify firmware with a windowed PIC17C43/JW or flash-based PIC18F4220 development part before committing to OTP production runs. The MCLR pin (pin 9) requires a 10 kohm pull-up to VDD for normal operation; floating MCLR causes intermittent resets. The RB6/RB7 pins (pins 18-19) used for ICSP programming must not be pulled low during reset or the part will enter programming mode unexpectedly.
Oscillator stability is critical for the 121 ns instruction cycle timing. Use a fundamental-mode crystal or ceramic resonator with the datasheet-recommended load capacitors (typically 22-33 pF) on OSC1/OSC2 (pins 7-8). For EMI-sensitive applications, place a 4-ohm series resistor between the crystal and OSC1 to dampen over-shoot. Avoid running long traces from the oscillator to the MCU; keep the crystal within 5 mm of the package and surround it with a guard ring tied to ground.
규정 준수 정보
RoHS-compliant TQFP-44 package per Microchip product page. Not AEC-Q100 qualified - legacy automotive designs should migrate to PIC18F or dsPIC33 AEC-Q100 alternatives. Obsolete life-cycle: PCN has recommended PIC18F4220 as the modern replacement.