Microchip Technology

PIC18F4439-I/P - 40MHz 8-Bit Flash MCU | Microchip Technology

부품 번호: PIC18F4439-I/P ✓ 활성
4.2 V to 5.5 V Vdss PDIP-40 Package 40 MHz Speed 12 KB Flash Memory
MOQ: 1 |

PIC18F4439-I/P 개요

Microchip Technology PIC18F4439-I/P is an 8-bit RISC flash microcontroller with 12 KB program memory, 640 bytes of RAM, 256 bytes of EEPROM, and a 40-pin PDIP package. It operates up to 40 MHz from a 4.2 V to 5.5 V supply and targets single-phase induction motor control with two PWM outputs, eight 10-bit ADC channels, and 32 I/O pins.

An 8-bit microcontroller is a compact digital controller built around a processor core, program memory, data memory, and programmable I/O. In the broader semiconductor hierarchy, the PIC18F4439-I/P belongs to the PIC18 family of 8-bit microcontrollers and combines Flash program memory, a C-compatible development environment, self-programming, and an integrated motor-control kernel. The -I/P suffix identifies the industrial-temperature, PDIP-40 ordering variant.

The principal features include 40 MHz operation, 12 KB of Flash memory, 640 bytes of RAM, and 256 bytes of EEPROM. Its two PWM modules support motor-drive and power-conversion control, while the eight-channel 10-bit ADC supplies feedback from analog sensors. Thirty-two I/O pins provide interfaces for control signals, position feedback, communications, and protection circuitry. Self-programming allows field-updatable control firmware, and the integrated in-circuit debugger supports development and diagnostics.

The PIC18 architecture uses a Harvard-style arrangement with separate program and data memories, a hardware interrupt structure, and dedicated peripherals for motor control. At 40 MHz, the controller provides substantially more timing headroom than low-clock-rate 8-bit implementations, while the ADC and dual PWM resources reduce the need for external components. Designers should still evaluate oscillator tolerance, interrupt latency, and motor-control loop timing against the system’s worst-case operating conditions.

Typical uses include single-phase induction motor drives, small pumps and fans, appliance control modules, and industrial automation products. The motor-control kernel and PWM outputs are particularly useful in variable-speed equipment, while the 10-bit ADC can monitor current, temperature, or supply voltage when paired with suitable external conditioning. The 40-pin PDIP package also favors through-hole prototypes, educational platforms, and repairable assemblies where a socketed controller is practical.

For a new PCB, preserve the PIC18F4439-I/P pin arrangement, provide compliant decoupling at every supply pin, and route high-current motor paths away from sensitive analog inputs. Confirm oscillator and reset circuitry against the manufacturer datasheet, program the appropriate configuration words, and validate brownout behavior over the complete 4.2 V to 5.5 V operating range. Through-hole temperature rise is usually modest, but thermal performance still depends on socket construction, airflow, and nearby heat sources.

This product page consolidates the manufacturer capability description, device specifications, sourcing guidance, comparison dimensions, and practical integration considerations. It also distinguishes exact-ordering information from broader PIC18F motor-control family devices, helping engineers determine compatibility before committing a board design to the 40-pin PDIP footprint.

드롭인 대체품: PIC18F4439-I/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F4439-I/P (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Program Memory, RAM, Mounting Type.

Microchip Technology
Operating Temperature: -40C to +85C (industrial, -I grade)
Package: 44-pin TQFP (PT), 10x10 mm
Program Memory: 8 KB Flash (4K x 16)
Microchip Technology
Operating Temperature: -40C to +85C (Industrial)
Package: 40-pin PDIP (DIP-40)
Program Memory: 16 KB (8K x 16) Flash
Microchip Technology
Operating Temperature: -40C to +125C (E = Extended grade)
Mounting Type: Through-Hole
Microchip Technology
Package: 40-pin DIP (PDIP)
RAM: 2 KB
Mounting Type: Through-hole

PIC18F4550-I/P

✅ 드롭인
Microchip Technology
📦 PDIP-40
8-bit PIC18 enhanced-flash microcontroller · 48 MHz · 32 KB · 2 KB · 40-pin DIP (PDIP) · Through-hole · Full-speed USB, 12 Mbit/s · Yes

가격 문의

데이터시트 보기 →

PIC18F43K22-I/PT

✅ 드롭인
Microchip Technology
📦 PDIP-40
PIC18 8-bit RISC · 64 MHz (16 MIPS) · 8 KB Flash (4K x 16) · 1 KB (768 bytes SRAM according to alternate listings) · 256 bytes · 2.3 V to 5.5 V · -40C to +85C (industrial, -I grade) · 36

가격 문의

데이터시트 보기 →

PIC18F4431-I/P

✅ 드롭인
Microchip Technology
📦 PDIP-40
PIC18F 8-bit RISC · 16 KB (8K x 16) Flash · 768 bytes · 256 bytes · 40 MHz · 4.2 V to 5.5 V · 34 (36 per digchip datasheet; 34 functional per Microchip datasheet) · 10-bit, up to 9 channels

가격 문의

데이터시트 보기 →

PIC18F4439-I/P 최대 정격 & 전기적 특성

Product Type 8-bit RISC Flash microcontroller
Maximum Clock Speed 40 MHz
Program Memory 12 KB Flash
RAM 640 bytes
EEPROM 256 bytes
I/O Pin Count 32 I/O pins
Total Pin Count 40 pins
Operating Voltage Range 4.2 V to 5.5 V
Nominal Supply Voltage 5 V
동작 온도 범위 -40°C to +85°C
ADC Resolution 10 bits
ADC Channel Count 8 channels
PWM Module Count 2 PWM modules
Package Type PDIP-40
Package Pitch 0.600 inch (15.24 mm)
장착 스타일 Through-hole
Programming Memory Type Flash
Self-Programming Supported
Development Debug Support Integrated in-circuit debugger
Architecture PIC18F 8-bit RISC
Motor Control Single-phase induction motor control kernel

PIC18F4439-I/P 0.600 inch (15.24 mm) 핀 구성 가이드

PIC18F4439-I/P(0.600 inch (15.24 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

PIC18F4439-I/P의 0.600 inch (15.24 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PIC18F4439-I/P.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PIC18F4439-I/P 적합 용도: 6 애플리케이션s: Single-Phase Induction Motor Drive, Small Pump and Fan Controller, Appliance Control Module, Industrial Sensor Interface, Power-Supply Monitoring, Educational Motor-Control Platform.

⚡

Single-Phase Induction Motor Drive

The PIC18F4439-I/P fits single-phase induction motor control because it combines a 40 MHz 8-bit core with a dedicated motor-control kernel, two PWM modules, and eight 10-bit ADC channels. The PWM outputs can generate the required motor-drive waveform, while the ADC channels can monitor current, temperature, or speed-related analog signals after suitable scaling. Its 32 I/O pins leave interface capacity for position sensors, gate-drive control, fault inputs, and communications. The 12 KB Flash and 256-byte EEPROM support application firmware, configuration data, and field updates. Designers should still account for isolation, motor-driver protection, switching-node layout, and current-sense limits because the microcontroller does not replace the external power stage.

🏭

Small Pump and Fan Controller

The PIC18F4439-I/P can implement a compact variable-speed controller for pumps, fans, and appliance motors. Its two PWM modules simplify the generation of controlled drive signals, while the eight-channel 10-bit ADC supports feedback from pressure, flow, temperature, or supply-voltage sensors. At 40 MHz, the controller has practical timing headroom for a control loop, fault handling, and communication tasks. The 640 bytes of RAM and 12 KB of Flash provide adequate space for a structured state machine without requiring a separate processor. In a real appliance, place analog sensing away from motor-switching traces and use the MCU only within the documented 4.2 V to 5.5 V supply range.

🔧

Appliance Control Module

The PIC18F4439-I/P is appropriate for appliance boards that coordinate motor operation, user inputs, and safety monitoring. Its 32 I/O pins can connect buttons, displays, relays, speed references, and fault signals, while the two PWM modules support motor excitation or auxiliary power control. The 256-byte EEPROM can retain calibration or configuration values, and self-programming supports controlled firmware upgrades where permitted by the product security policy. The 40-pin PDIP package supports prototyping, socketed production, and repair workflows where a large through-hole footprint is acceptable. A production design should add hardware watchdog and reset supervision, validate brownout behavior, and separate switching loads from sensitive control wiring.

🧩

Industrial Sensor Interface

The PIC18F4439-I/P can supervise an industrial sensor subsystem when the application requires local control, event logging, and actuator coordination. Its eight 10-bit ADC channels accept conditioned analog measurements, while 32 digital I/O lines handle discrete sensors, alarm outputs, and field interfaces. The 40 MHz CPU allows the firmware to combine sampling, filtering, thresholds, and communication without relying on a higher-cost processor. Self-programming and 256 bytes of EEPROM provide options for configuration management and field maintenance. For electrically noisy industrial environments, use proper input protection, isolated communication where necessary, defined reset behavior, and protective grounding; logic-level compatibility must be checked for every external sensor and actuator.

📊

Power-Supply Monitoring

The PIC18F4439-I/P can monitor a low-voltage power-conversion subsystem because its eight-channel 10-bit ADC and 32 I/O pins can accept divided voltage signals, current information, temperature feedback, and protection status. Although the MCU is not itself a switching converter, the dual PWM outputs can synchronize supervisory functions or test equipment, while the CPU manages thresholds and fault reporting. Its 4.2 V to 5.5 V operating range suits a 5 V control domain. Engineers should size analog dividers for the ADC input range, protect pins against transients, and ensure the 40-pin controller does not become a thermal or grounding problem in a densely assembled power board.

🎓

Educational Motor-Control Platform

The PIC18F4439-I/P is well suited to educational motor-control platforms because it exposes a broad set of I/O, two PWM modules, an eight-channel 10-bit ADC, Flash memory, EEPROM, self-programming, and an integrated debugger. Students can configure a timer-driven control algorithm, capture analog feedback, study motor starting and speed control, and update firmware without external nonvolatile storage. The 40-pin PDIP package is easy to socket on a laboratory board and remains suitable for breadboard and through-hole prototypes. A safe instructional system should use low-voltage motors, current limiting, isolated drive electronics, and mechanically secured fixtures so that the educational exercise does not depend on exposed mains voltage.

What are the key specifications of PIC18F4439-I/P that engineers should know?
The PIC18F4439-I/P is a 40 MHz, 8-bit Flash microcontroller with 12 KB of program memory, 640 bytes of RAM, 256 bytes of EEPROM, and 32 I/O pins. According to the Microchip Technology PIC18F4439 product description, it also provides two PWM modules, eight 10-bit ADC channels, self-programming, and an integrated in-circuit debugger. The device uses a 4.2 V to 5.5 V supply range and is offered in a 40-pin PDIP package for the -I/P ordering variant.
Where can I download the PIC18F4439-I/P datasheet PDF?
The official PIC18F4439-I/P documentation is available through the Microchip Technology PIC18F4439 product page, which provides device documentation and downloadable supporting material. A separate searchable PDF copy is also listed at the DiGi Electronics result URL. For design sign-off, use the manufacturer-hosted material and verify that it covers the PIC18F4439-I/P temperature grade, PDIP-40 package, electrical limits, pin functions, and configuration requirements.
Where can I find the PIC18F4439-I/P pinout?
The PIC18F4439-I/P pinout is defined in the manufacturer datasheet for the 40-pin PDIP package. Use the pin-description table, memory map, and package drawings to assign VDD, VSS, programming, oscillator, reset, I/O, analog, and motor-control connections. The web results confirm a 40-pin 0.600-inch PDIP configuration, but they do not reproduce every numbered pin name, so do not infer individual pin functions from the DIP outline alone.
What is the operating voltage of PIC18F4439-I/P?
The PIC18F4439-I/P operates from 4.2 V to 5.5 V, with 5 V identified as the nominal supply voltage in the device listing. The Microchip Technology product family is described as an enhanced Flash microcontroller family for single-phase induction motor control. Confirm operating limits, decoupling requirements, and brownout settings for the exact configuration in the manufacturer datasheet before finalizing the power supply and reset network.
How much Flash memory and RAM does PIC18F4439-I/P have?
The PIC18F4439-I/P provides 12 KB of Flash program memory and 640 bytes of data RAM. The Microchip product description also identifies 256 bytes of EEPROM for nonvolatile data retention. These resources distinguish it from smaller PIC18 devices and provide room for a motor-control kernel, application logic, configuration tables, and field-updatable firmware, although the final memory budget must be checked against the compiler output and interrupt structure.
Is PIC18F4439-I/P suitable for single-phase induction motor control?
Yes, the PIC18F4439-I/P is specifically targeted at single-phase induction motor control. Its dedicated motor-control kernel, two PWM modules, eight 10-bit ADC channels, and 32 I/O pins support feedback and gate-drive interfaces in compact appliance and industrial motor-control products. The 40 MHz CPU provides control-loop timing margin, but developers must still design sensing, isolation, power-stage protection, and electromagnetic-compatibility measures around the external circuitry.
PIC18F4439-I/P vs PIC18F4550-I/P: which is better for motor control?
PIC18F4439-I/P is the better direct choice when the design specifically needs its dedicated single-phase induction motor-control kernel, two PWM modules, and eight 10-bit ADC channels. The PIC18F4550-I/P is a related 40-pin PIC18 device, but the available comparison material does not establish identical peripheral assignments. Treat the PIC18F4550-I/P as a redesign candidate rather than an automatic drop-in substitute until Microchip pin and peripheral compatibility is confirmed.
What is the difference between PIC18F4439-I/P and PIC18F43K22-I/P?
Both devices are listed in a 40-pin PDIP comparison, but they belong to different generations and resource configurations. The PIC18F4439-I/P has 12 KB of Flash, 640 bytes of RAM, and 256 bytes of EEPROM, while the comparison identifies the PIC18F43K22-I/P with 8 KB of Flash, 512 bytes of RAM, and 256 bytes of EEPROM. Package similarity alone does not establish pin-to-pin compatibility, so existing firmware and board layouts require device-level verification.
When should I choose PIC18F4439-I/P over PIC18F4550-I/P?
Choose PIC18F4439-I/P when your single-phase induction motor design benefits directly from its dedicated motor-control kernel, two PWM blocks, and eight-channel 10-bit ADC. Choose PIC18F4550-I/P only after checking the complete pin list, peripheral mapping, interrupt vectors, and memory requirements against the target board. Both use a 40-pin PDIP format, but matching package dimensions do not by themselves prove software-level or electrical drop-in compatibility.
What can replace PIC18F4439-I/P?
A genuine drop-in replacement for PIC18F4439-I/P must use the same 40-pin PDIP footprint, preserve pin-to-pin electrical connections, and provide compatible power, oscillator, ADC, PWM, and programming interfaces. The PIC18F4550-I/P and PIC18F43K22-I/P appear in comparison searches, while PIC18F4431-I/P belongs to the broader PIC18 motor-control family. None can be treated as a confirmed drop-in replacement without reviewing the manufacturer pin and compatibility documentation.
Is PIC18F4439-I/P the same as PIC18F4550-I/P?
No, the PIC18F4439-I/P and PIC18F4550-I/P are not identical devices merely because both use a 40-pin PDIP package. The PIC18F4439-I/P is defined around a single-phase induction motor-control kernel with two PWM modules and eight 10-bit ADC channels. The comparison result identifies both package format and related family positioning but does not prove identical pin multiplexing or peripheral behavior, so firmware and schematic changes may be required.
What is the best Microchip equivalent for PIC18F4439-I/P?
The closest Microchip candidates found in documented comparisons are PIC18F4550-I/P, PIC18F43K22-I/P, and PIC18F4431-I/P, all associated with 40-pin-class implementations. The PIC18F4439-I/P remains the most defensible choice when its exact 12 KB Flash, 640-byte RAM, 256-byte EEPROM, dual-PWM, and eight-channel ADC configuration must be retained. Validate the candidate’s pin compatibility, memory map, and peripheral allocation before using it as a replacement.
Where to buy PIC18F4439-I/P online?
The PIC18F4439-I/P can be requested through the Request a Quote form on this page, where the exact MPN, package suffix, quantity, and target delivery details should be stated. The manufacturer product page remains the authoritative source for lifecycle and documentation. The device is listed as active in current device information, but current inventory, minimum order quantity, and lead time should be confirmed through the quote process.
What is the price of PIC18F4439-I/P?
The current unit price for PIC18F4439-I/P should be obtained through the Request a Quote form on this page because the device may be offered in tube packaging and commercial pricing can vary with quantity and supply status. State the exact MPN, including the -I/P suffix, and the required quantity. Avoid substituting a generic PIC18F4439 price because package, temperature grade, and ordering suffix must match.
What is the lead time for PIC18F4439-I/P and is it in stock?
Request the current lead time, available quantity, and minimum order quantity through the Request a Quote form on this page. The PIC18F4439-I/P is identified as an active device, but active lifecycle status does not by itself guarantee immediate stock. A confirmed quotation should also preserve the 40-pin PDIP package, industrial temperature range, and tube packing requested for the original design.

엔지니어링 참조 데이터: PIC18F4439-I/P — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PIC18F4439-I/P when an appliance, pump, fan, or industrial product needs a dedicated single-phase induction motor-control solution with two PWM modules, eight 10-bit ADC channels, 12 KB of Flash, 640 bytes of RAM, and 256 bytes of EEPROM. Its 40-pin PDIP package is particularly practical for prototypes, educational platforms, and socketed through-hole assemblies. PIC18F4550-I/P is a related 40-pin PIC18 candidate, but package identity alone does not establish identical peripheral mapping, so use it only after a full pin and firmware review. PIC18F43K22-I/P offers 8 KB of Flash and 512 bytes of RAM in the same documented package class, making it a candidate only when its exact pin functions and peripheral resources satisfy the design. PIC18F4431-I/P belongs to the related motor-control family and should likewise be selected only after checking memory, PWM, ADC, and pin compatibility. For an existing PCB, preserve the exact -I/P temperature and package configuration unless Microchip documentation confirms a complete substitution.

대체품과의 비교

파라미터 이 제품 PIC18F4550-I/P PIC18F43K22-I/P PIC18F4431-I/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package PDIP-40 PDIP-40 PDIP-40 PDIP-40
Architecture 8-bit PIC18 RISC 8-bit PIC18 RISC 8-bit PIC18 RISC 8-bit PIC18 RISC

주요 차별점

  • Larger program memory than the identified PIC18F43K22-I/P candidate (vs PIC18F43K22-I/P)
  • More RAM than the identified PIC18F43K22-I/P candidate (vs PIC18F43K22-I/P)
  • Explicit single-phase induction motor-control positioning (vs PIC18F43K22-I/P)

설계 노트

Place the PIC18F4439-I/P on the control side of the PCB and maintain the documented 40-pin PDIP footprint. Route analog inputs away from motor-switching nodes, relay contacts, and high-current return paths. Place bypass capacitors close to the supply pins and provide clean return paths beneath sensitive analog sections. Keep the oscillator and reset traces short, and route programming or debug access away from motor-drive circuitry to reduce coupling.

Design the controller rail for the documented 4.2 V to 5.5 V operating range and account for startup and brownout behavior in the external supply. Decoupling should follow the manufacturer guidance for the exact package and operating conditions. If the motor power stage shares a supply source with the MCU, use separate filtering and routing so motor transients do not pull the controller below its specified voltage range.

Treat ADC-connected motor-current, voltage, and temperature signals as analog inputs connected to a digital switching environment. Use divider impedance and filtering values that match the 10-bit ADC and the required sampling rate, then validate the input network with the actual sensor and power-stage impedance. Avoid sharing narrow return paths between analog sensing and PWM drive currents, and verify that any external protection network does not distort control-loop timing.

Do not treat the -I/P suffix as interchangeable with every PIC18F4439 package option: it specifies the industrial-temperature, PDIP-40 ordering configuration. Verify oscillator settings, configuration words, reset polarity, programming connections, and all analog-capable pins against the manufacturer pin table. Also avoid assuming that a 40-pin alternative is drop-in compatible solely because its package matches; confirm peripheral multiplexing, memory resources, and interrupt-vector changes.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The JLCPCB product result identifies the PIC18F4439-I/P as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited device information.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC18F4439-I/P datasheet PIC18F4439-I/P pinout PIC18F4439-I/P specifications PIC18F4439-I/P price PIC18F4439-I/P equivalent PIC18F4439-I/P replacement PIC18F4439-I/P vs PIC18F4550-I/P PIC18F4439-I/P vs PIC18F43K22-I/P PIC18F4439-I/P footprint PIC18F4439-I/P application circuit PIC18F4439-I/P programming PIC18F4439-I/P motor control

관련 부품 & 용어

Microchip Technology PIC18F4439-I/P PIC18F4439 PIC18F4550-I/P PIC18F43K22-I/P PIC18F4431-I/P PIC18F2439 PIC18F architecture 8-bit RISC microcontroller Flash program memory single-phase induction motor control motor-control kernel 10-bit analog-to-digital converter pulse-width modulation power supply rejection ratio PDIP-40 through-hole package surface-mount device industrial temperature range self-programming in-circuit debugger single-phase induction motor RoHS field-updatable firmware
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기