PIC18F44K20T-I/PT - 8-bit 64MHz 16KB Flash MCU 44-TQFP
부품 번호: PIC18F44K20T-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.45 | $5.45 |
| 10 | $4.91 | $49.10 |
| 100 | $4.36 | $436.00 |
| 500 | $3.92 | $1,960.00 |
| 1,000 | $3.49 | $3,490.00 |
PIC18F44K20T-I/PT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals on one silicon die. Within the broader embedded taxonomy, the PIC18F44K20 sits in the 8-bit MCU class, which competes with 16-bit and 32-bit MCUs for cost- and power-sensitive applications. Microchip's enhanced PIC18 core combines a 16-bit instruction word with 8-bit data paths, achieving up to 16 MIPS throughput while retaining the deterministic interrupt model that makes PIC MCUs popular in real-time control.
Key features include 16 KB Flash with self-programmability, 768 B SRAM, 256 B EEPROM, two USART modules, one MSSP (SPI/I2C), two CCP modules, and an enhanced 10-bit ADC with up to 14 channels. The nanoWatt XLP technology delivers typical sleep currents below 100 nA, and multiple low-power modes (Run, Idle, Sleep, and Deep Sleep with RTCC) allow designers to extend battery life in standby-heavy applications. Hardware multipliers and C-friendly instruction set extensions ease code density for embedded C compilers.
The PIC18F44K20 uses Microchip's enhanced Harvard architecture with a 16-bit program path and an 8-bit data path, allowing single-cycle execution of most instructions. An internal 16 MHz oscillator and 4x PLL support 64 MHz operation without external crystals; combined with the 31 kHz low-power internal oscillator for low-power Run mode, this provides designers flexible clocking without external components.
Typical applications include industrial sensor nodes, low-power remote controls, battery-powered instrumentation, automotive body controllers, consumer appliances, and USB-to-UART bridges (using the MSSP and USART peripherals). The 36 I/O count comfortably drives matrix keypads, character LCDs, and small graphic OLEDs while leaving pins for analog sensors and serial connectivity.
When designing with this MCU, reserve one timer for the RTCC (with external 32.768 kHz crystal) if you need a real-time clock, and allocate the MSSP channel carefully between SPI and I2C peripherals. The 44-pin TQFP footprint matches the PIC18F45K20, PIC18F46K20, PIC18F44J50, and PIC18F43K20 families, enabling straightforward upgrades along the memory/peripheral ladder. Pricing is approximately $5.45 at qty-1 as of 2026-09-27 per DigiKey/Mouser listings.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: PIC18F44K20T-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F44K20T-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, Timers, ADC, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F44K20-I/PT
✅ 드롭인✓ 재고 있음
$2.62 / 개
데이터시트 보기 →PIC18F45K20-I/PT
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →PIC18F46K20-I/PT
✅ 드롭인✓ 재고 있음
$1.78 / 개
데이터시트 보기 →PIC18F44K20T-I/ML
✅ 드롭인✓ 재고 있음
$2.84 / 개
데이터시트 보기 →PIC18F43K20-I/PT
✅ 드롭인✓ 재고 있음
$2.69 / 개
데이터시트 보기 →PIC18F44J50T-I/PT
✅ 드롭인✓ 재고 있음
$2.55 / 개
데이터시트 보기 →PIC18F44K20T-I/PT 최대 정격 & 전기적 특성
| Core Architecture | PIC18 (8-bit) |
| Program Memory (Flash) | 16 KB (8K x 16) |
| Data SRAM | 768 bytes |
| Data EEPROM | 256 bytes |
| Maximum CPU Speed | 64 MHz (16 MIPS) |
| Supply Voltage Range | 1.8 V to 3.6 V (extended 5.5 V) |
| I/O Pins | 36 |
| ADC | 10-bit, up to 14 channels |
| 동작 온도 | -40 C to +85 C (Industrial) |
| 패키지 | 44-pin TQFP (PT) 10x10 mm |
| 실장 유형 | Surface Mount |
| Packaging | Tape & Reel |
| USART Modules | 2 |
| MSSP (SPI/I2C) | 1 |
| CCP Modules | 2 |
| Low-Power Technology | nanoWatt XLP |
| Self-Programmable Flash | Yes |
| MSL 레벨 | 3 |
| RoHS 상태 | Compliant |
| AEC-Q100 | Qualified (automotive grade variant available) |
PIC18F44K20T-I/PT 핀 구성
| 핀 1 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| 핀 2 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| 핀 3 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
| 핀 4 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC VREF+ |
| 핀 5 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| 핀 6 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI Slave Select |
| 핀 7 | RA6 — PORTA bit 6 |
| 핀 8 | RA7 — PORTA bit 7 |
| 핀 9 | OSC1/CLKIN — Crystal oscillator input / external clock input |
| 핀 10 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| 핀 11 | RC0/T1OSO/T13CKI — PORTC bit 0 / Timer1 oscillator output / Timer1/3 clock |
| 핀 12 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 output |
| 핀 13 | RC2/CCP1 — PORTC bit 2 / CCP1 output |
| 핀 14 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| 핀 15 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| 핀 16 | RC5/SDO — PORTC bit 5 / SPI data out |
| 핀 17 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| 핀 18 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| 핀 19 | VSS — Ground reference |
| 핀 20 | VDD — Positive supply voltage (1.8-3.6V) |
| 핀 21 | RB0/INT0/FLT0 — PORTB bit 0 / External interrupt 0 / PWM fault input |
| 핀 22 | RB1/INT1 — PORTB bit 1 / External interrupt 1 |
| 핀 23 | RB2/INT2 — PORTB bit 2 / External interrupt 2 |
| 핀 24 | RB3/INT3/CCP2 — PORTB bit 3 / External interrupt 3 / CCP2 |
| 핀 25 | RB4/KBI0 — PORTB bit 4 / Interrupt-on-change bit 0 |
| 핀 26 | RB5/KBI1/PGM — PORTB bit 5 / Interrupt-on-change bit 1 / LVP program |
| 핀 27 | RB6/KBI2/PGC — PORTB bit 6 / Interrupt-on-change bit 2 / ICSP clock |
| 핀 28 | RB7/KBI3/PGD — PORTB bit 7 / Interrupt-on-change bit 3 / ICSP data |
| 핀 29 | VSS — Ground reference |
| 핀 30 | VDD — Positive supply voltage |
| 핀 31 | RE3/MCLR/VPP — PORTE bit 3 / Master Clear reset / programming voltage |
| 핀 32 | RD0 — PORTD bit 0 |
| 핀 33 | RD1 — PORTD bit 1 |
| 핀 34 | RD2 — PORTD bit 2 |
| 핀 35 | RD3 — PORTD bit 3 |
| 핀 36 | RD4 — PORTD bit 4 |
| 핀 37 | RD5 — PORTD bit 5 |
| 핀 38 | RD6 — PORTD bit 6 |
| 핀 39 | RD7 — PORTD bit 7 |
| 핀 40 | VSS — Ground reference |
| 핀 41 | VDD — Positive supply voltage |
| 핀 42 | RE0/RD — PORTE bit 0 / parallel slave port read |
| 핀 43 | RE1/WR — PORTE bit 1 / parallel slave port write |
| 핀 44 | RE2/CS — PORTE bit 2 / parallel slave port chip select |
일반적인 애플리케이션
PIC18F44K20T-I/PT 적합 용도: 7 애플리케이션s: Industrial Sensor Node, Battery-Powered Remote Control, Automotive Body Controller, Consumer Appliance Control, USB-to-UART Bridge, Low-Power Data Logger, Hobbyist Development Platform.
Industrial Sensor Node
The PIC18F44K20T-I/PT's nanoWatt XLP technology with sub-100nA sleep current and 64 MHz CPU make it ideal for industrial 4-20 mA sensor transmitters. The 36 I/O lines interface to multiple analog inputs via the 10-bit ADC with up to 14 channels, while the 2 USARTs support RS-485 half-duplex comms with auto-direction control via a CCP timer. Internal 16 MHz oscillator eliminates external crystals for compact, vibration-tolerant designs.
추천
Battery-Powered Remote Control
With nanoWatt XLP delivering typical sleep current below 100 nA and a 1.8-3.6V operating range, the PIC18F44K20T-I/PT extends battery life in handheld transmitters by years on a single CR2032 coin cell. The 2 CCP modules drive IR/PWM outputs, while the MSSP channel handles SPI displays or I2C peripherals. Deep Sleep mode with RTCC allows wake-on-timer functionality for low-duty-cycle remote control applications.
추천
Automotive Body Controller
AEC-Q100 qualified variants of the PIC18F44K20 support automotive body electronics like lighting controllers, HVAC blend doors, and seat adjusters. The 64 MHz CPU executes 16 MIPS for CAN-capable firmware stacks, the 36 I/O drive relays and switch inputs via high-current PORTB, and the 1.8-3.6V operation survives automotive load-dump events when paired with TVS protection. Note: AEC-Q100 requires the explicit automotive-grade ordering code.
추천
Consumer Appliance Control
From washing machines to microwave ovens, the PIC18F44K20T-I/PT drives character LCDs, capacitive touch buttons, and triac-SCR power stages via opto-isolated GPIO. The 16 KB Flash stores menu logic and fault diagnostics, while the 256-byte EEPROM retains user settings across power cycles. The 64 MHz speed handles real-time motor control loops with cycle-by-cycle PWM resolution down to 244 ns.
추천
USB-to-UART Bridge
For legacy serial-port replacement, the PIC18F44K20T-I/PT serves as a CDC-class USB-to-UART bridge when paired with an external USB transceiver (the 44-pin part lacks native USB). The 2 USARTs handle full-duplex RS-232 at up to 5 Mbps, while the MSSP adds I2C/SPI bridge capability. The 16 KB Flash accommodates USB stacks and bootloader firmware for field updates.
추천
Low-Power Data Logger
The PIC18F44K20T-I/PT's 768 B SRAM and 256 B EEPROM store sensor data while the nanoWatt XLP Deep Sleep mode (<100 nA) extends battery life through long deployments. The 10-bit ADC samples analog sensors at up to 100 ksps, and the MSSP writes to external SPI Flash for high-capacity logging. The RTCC wakes the MCU on schedule for years of unattended operation on 2x AA batteries.
추천
Hobbyist Development Platform
The PIC18F44K20T-I/PT serves as an upgrade target for hobbyists familiar with the 8-bit PIC platform. Compatible with MPLAB X IDE, XC8 compiler, and Curiosity/Explorer development kits, it pairs with MikroElektronika and Digilent click/PMOD boards via MikroBus. The 36 I/O count, character LCD support, and ICSP programming make it ideal for educational labs teaching embedded C and assembly.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F44K20T-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F44K20-I/PT | PIC18F45K20-I/PT | PIC18F46K20-I/PT | PIC18F44J50T-I/PT | PIC18F44K20T-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin TQFP (PT) | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin QFN (ML) - different footprint |
| Program Memory | 16 KB Flash | 16 KB Flash | 32 KB Flash | 64 KB Flash | 16 KB Flash | 16 KB Flash |
| SRAM | 768 B | 768 B | 1536 B | 3896 B | 3776 B | 768 B |
| Maximum CPU Speed | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 48 MHz / 12 MIPS | 64 MHz / 16 MIPS |
| USB 2.0 | No | No | No | No | Yes (Full-Speed OTG) | No |
| Operating Voltage | 1.8-3.6V | 1.8-3.6V | 1.8-3.6V | 1.8-3.6V | 2.0-3.6V | 1.8-3.6V |
| nanoWatt XLP | Yes | Yes | Yes | Yes | No (J-series) | Yes |
| I/O Pins | 36 | 36 | 36 | 36 | 34 | 36 |
| ADC | 10-bit, 14 channels | 10-bit, 14 channels | 10-bit, 14 channels | 10-bit, 14 channels | 10-bit, 13 channels | 10-bit, 14 channels |
주요 차별점
- nanoWatt XLP for sub-100nA sleep current (vs PIC18F44J50T-I/PT)
- Direct same-footprint upgrade path to 32 KB Flash (vs PIC18F44K20-I/PT)
- Single 1.8-3.6V supply supports coin-cell operation (vs PIC18F44J50T-I/PT (2.0-3.6V))
설계 노트
Estimated: at 64 MHz and 3.3V, active current is approximately 9 mA (per Microchip Figure 35-7 in the datasheet). For battery-powered designs using the nanoWatt XLP modes, leverage Sleep (typical 100 nA) and Deep Sleep with RTCC (typical 30 nA) by gating peripherals via PMD registers. Use the internal 31 kHz LFINTOSC for low-power Sleep modes that require precise timing.
Place a 100 nF decoupling capacitor within 5 mm of each VDD/VSS pin pair (the 44-pin TQFP has 3 VDD/VSS pairs at pins 19/20, 29/30, and 40/41). Add a bulk 10 uF tantalum or ceramic capacitor near the IC. For ADC accuracy, isolate AVSS/AVDD traces from digital switching currents with a star-ground topology.
Do not configure RA4 as a digital output on PIC18F2XK20/4XK20 parts - it is an open-drain-only pin requiring an external pull-up. Configure PGM pin (RB5) appropriately when using Low-Voltage Programming. MCLR must be tied to VDD via a 10 kohm resistor if unused; never leave it floating. The ICSP pins PGC/PGD (RB6/RB7) must not be loaded down with >10 kohm capacitance during in-circuit programming.
Route the crystal traces (OSC1/OSC2) short and symmetric, with grounded guard traces to prevent noise coupling. Place the 32.768 kHz watch crystal for RTCC on T1OSI/T1OSO (RC1/RC0) with loading capacitors of 6-15 pF per crystal datasheet. Keep high-speed digital traces (PWM, USART) away from the analog AVREF traces to minimize ADC noise injection.
규정 준수 정보
RoHS compliant per Microchip product page. The PIC18F44K20 family has AEC-Q100 qualified automotive variants available - choose the explicit automotive-grade ordering code (E suffix or /PT_V01) for in-vehicle applications.