PIC18F66K40T-E/PTVAO - 64KB Flash, 64MHz 8-bit MCU | Microchip
부품 번호: PIC18F66K40T-E/PTVAO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.85 | $6.85 |
| 10 | $6.2 | $62.00 |
| 100 | $5.55 | $555.00 |
| 500 | $5.05 | $2,525.00 |
| 1,000 | $4.6 | $4,600.00 |
PIC18F66K40T-E/PTVAO 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals (ADC, timers, communication) into one device. The PIC18F66K40 belongs to Microchip's PIC18 (8-bit) family, which sits within the broader hierarchy of microcontrollers -> embedded controllers -> semiconductors. The "K40" generation adds Core Independent Peripherals (CIPs) such as CWG, WWDT, CRC/Memory Scan, and SMT that operate autonomously without CPU intervention, reducing firmware burden and real-time latency.
Key features include a 10-bit ADC with ADC2 (computational) capability, a 5-bit DAC, two comparators, multiple PWM channels with complementary waveform generation, hardware limit timer (HLT), signal measurement timer (SMT), and the eXtreme Low Power (XLP) technology for battery-friendly sleep modes below 50 nA. The device supports both 3V and 5V operation, allowing direct interface to legacy analog and 5V sensor systems.
Architecturally, the PIC18F66K40 uses an enhanced 8-bit RISC Harvard architecture with a hardware multiplier, 31-level stack, and 32KB Flash program memory (organized as 32K x 16). CIP integration means time-critical tasks (sensor acquisition, motor control edge events, communication framing) can be handled in hardware while the CPU sleeps, allowing aggressive power budgeting. The instruction set remains compatible with the wider PIC18 toolchain, easing migration.
Typical applications include automotive body and sensor nodes, industrial control panels, HVAC fan/blown-air controllers, IoT edge sensor hubs, low-power wireless sensor interfaces, and consumer appliances. The wide 5V tolerance makes it a drop-in successor to legacy 5V PIC designs that must now operate from a 3V coin cell during standby.
When designing with this part, reserve adequate decoupling on AVDD and VDD (10uF bulk + 0.1uF per pin pair) and configure unused I/O as outputs low to avoid floating-input shoot-through. The automotive-grade "E" temperature suffix and "VAO" suffix indicate PPAP-capable factory flow; confirm with Microchip documentation before substituting the standard "I" variant in automotive systems.
드롭인 대체품: PIC18F66K40T-E/PTVAO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F66K40T-E/PTVAO (동일 폼 팩터 및 풋프린트) — 차이점: Package, Program Memory (Flash), ADC, MSL Level, DAC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F66K40T-I/PT
✅ 드롭인✓ 재고 있음
$2.52 / 개
데이터시트 보기 →PIC18F66K40-E/PTVAO
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →PIC18F66K40-E/PT
✅ 드롭인✓ 재고 있음
$2.78 / 개
데이터시트 보기 →PIC18F67K40-I/PT
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →PIC18F66K22T-I/PT
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →PIC18F66K40T-E/PTVAO 최대 정격 & 전기적 특성
| Core Architecture | PIC18 (8-bit RISC, Harvard) |
| Program Memory (Flash) | 64 KB (32K x 16 words) |
| Data Memory (RAM) | 4 KB (3562 bytes) |
| EEPROM | 1 KB |
| Maximum CPU Clock | 64 MHz |
| Operating Voltage | 2.3 V to 5.5 V |
| I/O Pins | 60 |
| ADC | 10-bit ADC2 (computational) |
| DAC | 5-bit DAC |
| Comparators | 2 |
| PWM Channels | Multiple (with CWG/Complementary) |
| 패키지 | 64-pin TQFP (10x10 mm) |
| 동작 온도 | -40C to +125C (automotive E grade) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 |
| RoHS 상태 | Compliant |
PIC18F66K40T-E/PTVAO 핀 구성
| 핀 1 | RE0 — I/O port E bit 0 / AN5 |
| 핀 2 | RE1 — I/O port E bit 1 / AN6 |
| 핀 3 | RE2 — I/O port E bit 2 / AN7 |
| 핀 4 | RE3 — I/O port E bit 3 / no AN; MCLR/VPP on some K40 |
| 핀 5 | VDD — Digital supply |
| 핀 6 | RA0 — I/O port A bit 0 / AN0 |
| 핀 7 | RA1 — I/O port A bit 1 / AN1 |
| 핀 8 | RA2 — I/O port A bit 2 / AN2 |
| 핀 9 | RA3 — I/O port A bit 3 / AN3 / VREF+ |
| 핀 10 | RA4 — I/O port A bit 4 / AN4 |
| 핀 11 | RA5 — I/O port A bit 5 / AN5 |
| 핀 12 | RA6 — I/O port A bit 6 / OSC2 |
| 핀 13 | RA7 — I/O port A bit 7 / OSC1 |
| 핀 14 | VSS — Digital ground |
| 핀 15 | RB0 — I/O port B bit 0 / INT0 |
| 핀 16 | RB1 — I/O port B bit 1 / INT1 |
| 핀 17 | RB2 — I/O port B bit 2 / INT2 |
| 핀 18 | RB3 — I/O port B bit 3 / INT3 |
| 핀 19 | RB4 — I/O port B bit 4 |
| 핀 20 | RB5 — I/O port B bit 5 |
| 핀 21 | RB6 — I/O port B bit 6 / ICSCLK |
| 핀 22 | RB7 — I/O port B bit 7 / ICSDAT |
| 핀 23 | RC0 — I/O port C bit 0 |
| 핀 24 | RC1 — I/O port C bit 1 |
| 핀 25 | RC2 — I/O port C bit 2 / AN11 |
| 핀 26 | RC3 — I/O port C bit 3 / AN12 |
| 핀 27 | RC4 — I/O port C bit 4 / AN13 |
| 핀 28 | RC5 — I/O port C bit 5 / AN14 |
| 핀 29 | RC6 — I/O port C bit 6 / AN15 / TX |
| 핀 30 | RC7 — I/O port C bit 7 / AN16 / RX |
| 핀 31 | VSS — Digital ground |
| 핀 32 | RD0 — I/O port D bit 0 / PSP0 |
| 핀 33 | RD1 — I/O port D bit 1 / PSP1 |
| 핀 34 | RD2 — I/O port D bit 2 / PSP2 |
| 핀 35 | RD3 — I/O port D bit 3 / PSP3 |
| 핀 36 | RD4 — I/O port D bit 4 / PSP4 |
| 핀 37 | RD5 — I/O port D bit 5 / PSP5 / PWM |
| 핀 38 | RD6 — I/O port D bit 6 / PSP6 / PWM |
| 핀 39 | RD7 — I/O port D bit 7 / PSP7 / PWM |
| 핀 40 | AVSS — Analog ground |
| 핀 41 | AVDD — Analog supply |
| 핀 42 | RF0 — I/O port F bit 0 / AN17 |
| 핀 43 | RF1 — I/O port F bit 1 / AN18 |
| 핀 44 | RF2 — I/O port F bit 2 / AN19 |
| 핀 45 | RF3 — I/O port F bit 3 / AN20 |
| 핀 46 | RF4 — I/O port F bit 4 / AN21 |
| 핀 47 | RF5 — I/O port F bit 5 / AN22 |
| 핀 48 | RF6 — I/O port F bit 6 / AN23 |
| 핀 49 | RF7 — I/O port F bit 7 / AN24 |
| 핀 50 | RG0 — I/O port G bit 0 |
| 핀 51 | RG1 — I/O port G bit 1 |
| 핀 52 | RG2 — I/O port G bit 2 |
| 핀 53 | RG3 — I/O port G bit 3 |
| 핀 54 | RG4 — I/O port G bit 4 |
| 핀 55 | MCLR — Master Clear reset / programming voltage input |
| 핀 56 | RH0 — I/O port H bit 0 / AN25 |
| 핀 57 | RH1 — I/O port H bit 1 / AN26 |
| 핀 58 | RH2 — I/O port H bit 2 / AN27 |
| 핀 59 | RH3 — I/O port H bit 3 / AN28 |
| 핀 60 | VDD — Digital supply |
| 핀 61 | VSS — Digital ground |
| 핀 62 | RH4 — I/O port H bit 4 / AN29 |
| 핀 63 | RH5 — I/O port H bit 5 / AN30 |
| 핀 64 | RH6 — I/O port H bit 6 / AN31 |
일반적인 애플리케이션
PIC18F66K40T-E/PTVAO 적합 용도: 6 애플리케이션s: Automotive Body & Sensor ECUs, Industrial Sensor Hubs & PLCs, Low-Power IoT Edge Nodes, Consumer Appliance Control Boards, Motor Control & PWM Drivers, HVAC & Fan Speed Controllers.
Automotive Body & Sensor ECUs
The PIC18F66K40T-E/PTVAO targets automotive body and sensor ECUs that must operate from -40C to +125C while drawing under 50 nA in standby. Its 64KB Flash and 4KB RAM host CAN/UART/LIN protocol stacks for BCM, lighting, and seat modules. The 5V-tolerance replaces legacy PIC16 designs without re-spins.
추천
Industrial Sensor Hubs & PLCs
The 10-bit ADC2 with hardware averaging makes PIC18F66K40T-E/PTVAO well suited to multi-channel analog sensor acquisition in industrial PLC and process-control modules. CIPs handle timing-critical encoder or PWM tasks so the CPU can downclock, freeing headroom for Modbus RTU communications and edge filtering without jitter.
추천
Low-Power IoT Edge Nodes
XLP technology on PIC18F66K40T-E/PTVAO delivers deep-sleep currents under 50 nA, making the part attractive for battery-powered IoT sensor nodes such as wireless thermostats and remote environmental monitors. ADC2 can wake on analog threshold, while SMT gates wake events on PWM edges, extending coin-cell life beyond multi-year targets.
추천
Consumer Appliance Control Boards
Wide 2.3V-5.5V supply tolerance on PIC18F66K40T-E/PTVAO simplifies power design for washing machines, dishwashers, and induction cooktops. The K40 family integrates FVR, comparator-based zero-cross detection, and CWG for triac/IGBT drive, reducing BOM count in cost-sensitive mass-production appliance controllers.
추천
Motor Control & PWM Drivers
PIC18F66K40T-E/PTVAO integrates CWG (Complementary Waveform Generator) and PWM that fit BLDC, stepper, and full-bridge motor drivers up to a few hundred watts. Hardware dead-band control and the HLT hardware limit timer close critical fault paths in microseconds without firmware latency.
추천
HVAC & Fan Speed Controllers
The PIC18F66K40T-E/PTVAO's SMT timer captures tachometer pulses from brushless DC fans with sub-microsecond resolution, enabling closed-loop RPM control in HVAC ducts. Its 5V-tolerant I/O directly drives opto-coupled triac interfaces while the ADC monitors NTC thermistors for thermal regulation feedback.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F66K40T-E/PTVAO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F66K40T-I/PT | PIC18F66K40-E/PTVAO | PIC18F66K40-E/PT | PIC18F67K40-I/PT | PIC18F66K22T-I/PT |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP - same | 64-TQFP - same | 64-TQFP - same | 64-TQFP - same | 64-TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 64 KB |
| Maximum Clock | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 8 KB | 4 KB |
| Core Independent Peripherals (CIP) | ADC2, CWG, SMT, HLT, WWDT | ADC2, CWG, SMT, HLT, WWDT | ADC2, CWG, SMT, HLT, WWDT | ADC2, CWG, SMT, HLT, WWDT | ADC2, CWG, SMT, HLT, WWDT | Limited CWG, no ADC2 / SMT / HLT |
주요 차별점
- PPAP-capable automotive-grade variant in TQFP-64 (vs PIC18F66K40T-I/PT)
- Core Independent Peripherals (CIP) offload CPU (vs PIC18F66K22T-I/PT)
- Family scalability within same footprint (vs PIC18F66K22T-I/PT)
설계 노트
Decouple both AVDD and VDD independently on PIC18F66K40T-E/PTVAO. Place 10uF bulk ceramic + 0.1uF X7R at each AVDD/VDD pin pair within 5 mm of the package. Use a ferrite bead between digital VDD and analog AVDD to keep switching noise below 5 mV on the ADC rail, which is critical when running the 10-bit ADC2 at 200 kS/s conversion rates.
The 64-pin TQFP package on PIC18F66K40T-E/PTVAO has a theta_JA of approximately 49 C/W (4-layer JEDEC EIA/JESD51-7). At the maximum 64 MHz CPU clock and 5V supply at full I/O load, the device still draws under 15 mA so self-heating is negligible in automotive environments; however, ensure airflow in sealed under-hood enclosures or derate by 10C if board is stacked against a heat source.
Route the ICSP signals (ICSCLK/ICSDAT on RB6/RB7) to an in-circuit programming header or test pad to keep production line firmware updates viable. Keep ICP/ICSP traces short (<50 mm) and isolated from switching nodes; share no layer adjacent to high-dv/dt SMPS or motor gate traces.
PIC18F66K40T-E/PTVAO pins (RE3, RF6) have analogue-share caveats - RE3 is a general I/O only when MCLR is disabled, so failure to drive the configuration bit will silently route it as MCLR and break wake-up behaviour. Always verify CONFIG3H<MCLRE> in code and Microchip's MPLAB-X MCC pin manager before locking down the BOM. Unused I/O must be set as outputs low to avoid floating-input shoot-through at high temperature.
For PWM/CWG outputs on PIC18F66K40T-E/PTVAO switching gate drivers, place a 33 ohm series resistor at the GPIO to dampen ringing and keep edges below 5 ns/V. Add 100 pF to GND on each PWM output to form an RC snubber; this combination typically cuts EMI peaks by 8-12 dB on a typical BLDC half-bridge.
규정 준수 정보
AEC-Q100 automotive qualified per the -E suffix and PPAP-capable VAO suffix. RoHS/REACH compliant per Microchip product declarations. Halogen-free per Microchip PCN documents.
