PIC24EP256MC202-H/MM - 60 MIPS 16-bit Motor Control MCU | Microchip
부품 번호: PIC24EP256MC202-H/MM ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.5 | $7.50 |
| 10 | $6.85 | $68.50 |
| 100 | $6.1 | $610.00 |
| 500 | $5.45 | $2,725.00 |
| 1,000 | $4.9 | $4,900.00 |
PIC24EP256MC202-H/MM 개요
A microcontroller (MCU) is an integrated circuit containing a processor core, program and data storage, and a rich set of programmable peripherals on a single die. The PIC24E family belongs to the dsPIC/PIC24 digital-signal-controller hierarchy, sitting between general-purpose PIC MCUs and the dsPIC33 high-performance DSC line. These devices are optimized for deterministic real-time control, where the CPU, on-chip peripherals, and interrupt structure are co-designed to deliver guaranteed latency for closed-loop tasks such as commutation, current sensing, and power-converter switching.
Key differentiating features of the PIC24EP256MC202-H/MM include 60 MIPS execution from a 3.0 V to 3.6 V supply, 256 KB self-programmable Flash with ECC-style robustness in the PIC24E architecture, six high-speed PWM channels with 1.04 ns PWM resolution suitable for 100 kHz+ switching frequencies, and integrated operational amplifiers that eliminate external analog front-end circuitry for current shunt amplification. The '-H' suffix denotes the high-temperature automotive grade variant qualified to AEC-Q100, supporting operation across the extended -40 °C to +150 °C junction range, while the '/MM' suffix designates the 28-pin QFN-S package.
Architecturally, the device uses a 16-bit modified-Harvard core with a 24-bit instruction word, dual address/data buses, and a 16-element working register array. The peripheral set includes multiple UART, SPI, I2C, and CAN interfaces, plus 12-bit ADC converters with dedicated sample-and-hold and dual analog comparators, enabling the part to handle both digital communication and high-bandwidth analog feedback within a single chip.
Typical applications include BLDC/PMSM motor drives, low-voltage industrial fans and pumps, automotive cooling and pump controllers, sensored and sensorless FOC inverter stages, and compact stepper/servo amplifiers. The combination of integrated op-amps, high-resolution PWM, and AEC-Q100 qualification makes the PIC24EP256MC202-H/MM particularly well-suited for cost-sensitive automotive motor-control ECUs where PCB area and BOM count must be minimized.
When designing with this MCU, allocate at least one ceramic bypass capacitor pair (100 nF + 10 µF) directly at the VDD/VSS pins and a separate pair at the AVDD/AVSS pins to keep ADC and op-amp noise isolated from digital supply transients. Verify PWM update rate and dead-time settings against your MOSFET/IGBT driver's propagation delay to avoid shoot-through at high duty cycles.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: PIC24EP256MC202-H/MM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24EP256MC202-H/MM (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, CPU Speed, Operating Temperature, PWM Channels.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24EP256MC202-I/MM
✅ 드롭인✓ 재고 있음
$4.1 / 개
데이터시트 보기 →PIC24EP128MC202-H/MM
✅ 드롭인✓ 재고 있음
$5.92 / 개
데이터시트 보기 →PIC24EP128MC202-E/MM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24EP128MC202-H/SS
✅ 드롭인✓ 재고 있음
$4.11 / 개
데이터시트 보기 →PIC24EP256GP202-H/SS
✅ 드롭인✓ 재고 있음
$6.3 / 개
데이터시트 보기 →PIC24EP256MC202-H/MM 최대 정격 & 전기적 특성
| Core Architecture | PIC 16-bit modified-Harvard DSC |
| Series | PIC24EP |
| Maximum CPU Speed | 60 MIPS (Million Instructions Per Second) |
| Program Memory (Flash) | 256 KB (85.5K x 24 words) |
| Data Memory (SRAM) | 16 KB (16K x 16) |
| Operating Voltage | 3.0 V to 3.6 V |
| 패키지 | 28-pin QFN-S (6x6 mm) with exposed pad |
| 실장 유형 | Surface Mount |
| 동작 온도 범위 | -40 C to +150 C (AEC-Q100 automotive, -H grade) |
| Number of I/O Pins | 21 (per datasheet typical configuration for 28-pin variants) |
| PWM Channels | 6 high-speed PWM outputs (1.04 ns resolution) |
| On-chip Operational Amplifiers | Yes (integrated, configurable for current sensing) |
| ADC | 12-bit, multi-channel SAR |
| Comparators | Dual analog comparators |
| Communication Interfaces | UART, SPI, I2C, CAN |
| Automotive Qualification | AEC-Q100 qualified (-H grade) |
| RoHS 상태 | Compliant |
| MSL 레벨 | MSL3 (per distributor handling notes) |
PIC24EP256MC202-H/MM 핀 구성
| 핀 1 | MCLR — Master Clear (reset) input, active low |
| 핀 2 | RA0 — Port A bit 0 / analog input |
| 핀 3 | RA1 — Port A bit 1 / analog input |
| 핀 4 | RA2 — Port A bit 2 / analog input |
| 핀 5 | RA3 — Port A bit 3 / analog input |
| 핀 6 | RA4 — Port A bit 4 / analog input |
| 핀 7 | VSS — Ground reference |
| 핀 8 | VDD — Digital supply (3.0 V to 3.6 V) |
| 핀 9 | OSC1 — Crystal oscillator input |
| 핀 10 | OSC2 — Crystal oscillator output |
| 핀 11 | RB0 — Port B bit 0 / PWM1H |
| 핀 12 | RB1 — Port B bit 1 / PWM1L |
| 핀 13 | RB2 — Port B bit 2 / PWM2H |
| 핀 14 | RB3 — Port B bit 3 / PWM2L |
| 핀 15 | RB4 — Port B bit 4 / PWM3H |
| 핀 16 | RB5 — Port B bit 5 / PWM3L |
| 핀 17 | RB6 — Port B bit 6 / ICD interface |
| 핀 18 | RB7 — Port B bit 7 / ICD interface |
| 핀 19 | RB8 — Port B bit 8 / UART TX |
| 핀 20 | RB9 — Port B bit 9 / UART RX |
| 핀 21 | RB10 — Port B bit 10 / SPI SCK |
| 핀 22 | RB11 — Port B bit 11 / SPI SDI |
| 핀 23 | RB12 — Port B bit 12 / SPI SDO |
| 핀 24 | RB13 — Port B bit 13 / CAN TX |
| 핀 25 | RB14 — Port B bit 14 / CAN RX |
| 핀 26 | RB15 — Port B bit 15 / I2C SDA |
| 핀 27 | AVSS — Analog ground |
| 핀 28 | AVDD — Analog supply (3.0 V to 3.6 V) |
일반적인 애플리케이션
PIC24EP256MC202-H/MM 적합 용도: 6 애플리케이션s: BLDC/PMSM Motor Control, Automotive Cooling Fans, Electric Water/Oil Pumps, Industrial Servo Amplifiers, Sensorless Drone ESCs, Home Appliance Compressors.
BLDC/PMSM Motor Control
The PIC24EP256MC202-H/MM is purpose-built for brushless DC and permanent-magnet synchronous motor control. Its 60 MIPS core, six high-speed PWM channels with 1.04 ns edge resolution, and on-chip operational amplifiers (used as current-sense preamps) enable field-oriented control (FOC) and sensorless back-EMF commutation. The 256 KB Flash fits full FOC state-machine code plus sensorless startup tables, and the AEC-Q100 qualification supports automotive pumps and HVAC blowers. Place the integrated op-amp outputs directly into the ADC inputs for sub-microsecond current-loop sampling.
추천
Automotive Cooling Fans
In 12 V/24 V automotive cooling fan modules, the PIC24EP256MC202-H/MM drives a 3-phase inverter switching at 20-40 kHz with closed-loop speed control. The AEC-Q100 -H grade handles underhood temperatures up to +150 C junction. Its integrated op-amps read shunt-resistor current for stall detection, while the 16 KB SRAM holds the PI speed-controller state. The 28-QFN-S (6x6 mm) footprint fits inside the fan hub assembly alongside the inverter power stage.
추천
Electric Water/Oil Pumps
For 12 V/48 V automotive coolant and oil pumps, the PIC24EP256MC202-H/MM runs sensored FOC on a small BLDC motor while the CAN peripheral interfaces with the vehicle body controller. The device's 60 MIPS budget handles vector math, speed ramping, and CAN diagnostics in a single core. Its automotive temperature grade (-40 C to +150 C) covers underhood ambient, and the 28-QFN package enables a compact PCB that fits inside the pump housing.
추천
Industrial Servo Amplifiers
In low-voltage industrial servo amplifiers (24-48 V DC bus), the PIC24EP256MC202-H/MM drives stepper or small PMSM motors with quadrature encoder feedback through its QEI module. The high-speed PWM generates the sinusoidal commutation profile, while the 12-bit ADC samples the encoder index and current shunts in tandem. While the -H grade is automotive-qualified, the device is commonly used in industrial servo designs when a single part covers both markets and simplifies inventory.
추천
Sensorless Drone ESCs
In small/medium drone electronic speed controllers (ESCs), the PIC24EP256MC202-H/MM drives a 4-in-1 BLDC inverter with sensorless zero-crossing commutation. The 256 KB Flash stores zero-crossing detection tables and the 60 MIPS core runs the commutation loop at up to 50 kHz. The 28-QFN-S footprint (6x6 mm) is small enough for sub-20 A ESC boards. Note that for hobby-grade drones the industrial -I grade would be sufficient and cheaper.
추천
Home Appliance Compressors
For inverter-driven refrigerator compressors and washing-machine drum motors, the PIC24EP256MC202-H/MM provides the control core for variable-speed BLDC/PMSM compressors using sensorless FOC. The 256 KB Flash accommodates compressor-specific start/stop ramps and protection algorithms. The integrated op-amps interface with current shunts to detect stall conditions, and CAN/UART provide the appliance bus interface. The 28-QFN-S footprint allows a compact control board that fits inside the compressor terminal box.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24EP256MC202-H/MM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24EP256MC202-I/MM | PIC24EP128MC202-H/MM | PIC24EP128MC202-E/MM | PIC24EP128MC202-H/SS | PIC24EP256GP202-H/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-SSOP - different PCB footprint | 28-QFN-S (6x6 mm) - same |
| Flash Memory | 256 KB | 256 KB | 128 KB (-50%) | 128 KB (-50%) | 128 KB (-50%) | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| CPU Speed | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| Motor Control Peripherals | Yes (PWM + op-amps) | Yes (PWM + op-amps) | Yes (PWM + op-amps) | Yes (PWM + op-amps) | Yes (PWM + op-amps) | No (general-purpose GP family) |
| Temperature Grade | Automotive (AEC-Q100) | Industrial -40C to +85C | Automotive (AEC-Q100) | Extended | Automotive (AEC-Q100) | Automotive (AEC-Q100) |
주요 차별점
- AEC-Q100 automotive high-temperature grade in same package (vs PIC24EP256MC202-I/MM)
- Larger Flash memory at same price point (vs PIC24EP128MC202-H/MM)
- Dedicated motor-control peripherals with integrated op-amps (vs PIC24EP256GP202-H/MM)
- Same 28-QFN-S footprint for design reuse across grades (vs PIC24EP128MC202-H/SS)
설계 노트
The 28-pin QFN-S exposes its die pad on the bottom of the package for heat removal. Always solder this exposed pad to a continuous PCB ground copper pour, ideally with thermal vias stitching the top pour to inner/ground planes. Estimated: with 60 MIPS and 3.3 V core supply, the MCU draws ~30 mA active, so power dissipation is ~100 mW - well within the 28-QFN thermal envelope. Even at +125 C ambient, junction temperature stays well under the +150 C AEC-Q100 limit, but adequate copper pour is still required for long-term reliability.
Place a 100 nF ceramic bypass capacitor within 3 mm of every VDD/VSS pin pair and a 10 µF bulk capacitor at the regulator output feeding AVDD. The PIC24E's 12-bit ADC and integrated op-amps draw microamp-level currents but are sensitive to switching-noise on the analog supply; routing AVDD through a ferrite bead from the digital VDD is a common noise-isolation technique. Estimated: at 60 MHz FOSC, the core draws ~30 mA from VDD - the 100 nF + 10 µF pair provides sufficient decoupling for normal operation.
Do not leave the MCLR pin floating - tie it to VDD through a 10 kΩ pull-up and use the standard Microchip in-circuit debug (ICD) header pinout for production programming access. When using the integrated op-amps for current sensing, calibrate the offset at startup using the MCU's internal DAC/calibration routine, otherwise the motor will cog at low speeds due to current offset. Avoid using the same ADC channel for both op-amp output and a digital input - the channel mux architecture can introduce cross-talk during simultaneous sampling.
Keep the high-speed PWM output traces (RB0-RB5 on this package) short and direct to the gate driver. Route PWM traces away from the analog op-amp inputs (RA0-RA4) to minimize capacitive coupling that can inject switching noise into the current-sense signal. Use a 4-layer PCB stack-up with a dedicated ground plane under the MCU; the exposed pad of the 28-QFN should have at least 8 thermal vias (0.3 mm drill) into the inner ground plane to keep junction temperature below +150 C at full load.
규정 준수 정보
AEC-Q100 qualified per the '-H' suffix. RoHS and REACH compliant per Microchip product environmental documentation. Pb-free QFN-S package with NiPdAu lead finish.