Microchip Technology

PIC24FV16KM204-I/MV - 16KB Flash XLP 16-bit MCU | Microchip

부품 번호: PIC24FV16KM204-I/MV ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
2.0 V to 5.5 V Vdss 48-UQFN (MV) 6x6 mm Package 32 MIPS at 32 MHz Speed 16 KB (5.5K x 24) Memory
시작가 $2.62 USD / 개
MOQ: 1 |
가격 업데이트: 2026-10-09
볼륨 가격
수량 단가 합계
1 $4.12 $4.12
10 $3.72 $37.20
100 $3.31 $331.00
500 $2.96 $1,480.00
1,000 $2.62 $2,620.00
ℹ️ 모든 가격은 USD 기준입니다

PIC24FV16KM204-I/MV 개요

The Microchip PIC24FV16KM204-I/MV is a 16-bit PIC® XLP™ 24F microcontroller delivering 32 MIPS at 32 MHz, with 16 KB (5.5K x 24) Flash, 2 KB RAM, and 512 B EEPROM, housed in a 48-pin UQFN (MV, 6x6 mm) package. Operating from 2.0 V to 5.5 V, this MCU integrates 12-bit ADC, 8-bit DAC, operational amplifiers, comparators, Configurable Logic Cells (CLC), and Peripheral Trigger Generator (PTG) to provide an extreme-low-power platform for portable and battery-driven designs.

An MCU (Microcontroller Unit) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals. The PIC24FV family is built on a 16-bit modified-RISC architecture with DSP enhancements, positioned within Microchip's hierarchy as PIC24F (16-bit, low-power) -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Its XLP technology targets sleep currents below 1 µA, enabling years of operation from a single coin cell.

Key features include up to 37 digital I/O pins, four 16-bit timers, two UART, two SPI, two I²C, three 16-bit Capture/Compare/PWM modules, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator that offloads complex sequencing from the core. The integrated op amps and 12-bit ADC deliver up to 200 ksps conversion, supporting sensor-conditioning front-ends without external analog ICs.

The PIC24FV16KM204 family uses a Harvard architecture with separate program and data buses, 24-bit instruction word with DSP-aware addressing, and hardware multiply/divide. Peripherals connect via the Peripheral Pin Select (PPS) mapper, allowing flexible pin assignment for serial interfaces, which simplifies PCB routing in space-constrained designs.

Typical applications include portable medical devices, sensor node firmware, IoT edge nodes, USB/HID peripherals, low-cost motor drive control, and general-purpose industrial controllers requiring mixed analog/digital integration. Designers favor this family when combining small PCB footprints with on-chip op amps and DACs.

When designing with this MCU, ensure decoupling capacitors of 0.1 µF and 1 µF are placed within 5 mm of each VDD pin, leave the thermal pad soldered for thermal and electrical ground integrity, and follow the PPS configuration sequence in code to avoid unintended peripheral lock-ups.

This page synthesizes distributor pricing, drop-in alternatives, and design guidance not consolidated on any single manufacturer page.

드롭인 대체품: PIC24FV16KM204-I/MV — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FV16KM204-I/MV (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Comparators, DAC, Package, Program Memory (Flash).

Microchip Technology
ADC: 12-bit, 30 channels (typical)
Comparators: 3
DAC: Dual 8-bit

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC24F16KM204-I/MV

✅ 드롭인
Microchip Technology
📦 48-UQFN (MV, 6x6 mm)
PIC 16-bit (PIC24F XLP) · 16 KB (5.5K x 24 words) · 2 KB · 32 MHz (8 MIPS) · 1.8 V to 3.6 V · 43 · 12-bit, 30 channels (typical) · Dual 8-bit

✓ 재고 있음

$2.58 / 개

데이터시트 보기 →

PIC24FV32KM204-I/MV

✅ 드롭인
📦 48-UQFN (MV, 6x6 mm)
32 KB Flash vs 16 KB (+100% Flash); same UQFN-48 (MV) footprint, same peripherals, same 2.0-5.5 V range

📋 참조 대체품 (카탈로그에 없음)

PIC24FV08KM204-I/MV

✅ 드롭인
📦 48-UQFN (MV, 6x6 mm)
8 KB Flash vs 16 KB (-50% Flash); same UQFN-48 (MV) footprint and peripherals

📋 참조 대체품 (카탈로그에 없음)

PIC24FV16KM202-I/MV

✅ 드롭인
📦 48-UQFN (MV, 6x6 mm)
28-pin pinout subset vs 48-pin (-42% I/O); not pin-compatible despite shared package code MV - use only when 28 I/O suffice

📋 참조 대체품 (카탈로그에 없음)

DSPIC33EV64GM104-I/PT

✅ 드롭인
📦 44-TQFP (PT, 10x10 mm)
dsPIC33 16-bit DSP core vs PIC24F MCU; 64 KB Flash vs 16 KB (+300%); TQFP-44 vs UQFN-48 - NOT pin-compatible, different package

📋 참조 대체품 (카탈로그에 없음)

PIC24FV16KM204-I/MV 최대 정격 & 전기적 특성

Architecture PIC24F 16-bit modified Harvard
Core 16-bit DSP-enhanced MCU
Maximum CPU Speed 32 MIPS at 32 MHz
Program Memory (Flash) 16 KB (5.5K x 24)
RAM 2 KB
EEPROM 512 B
Operating Voltage Range 2.0 V to 5.5 V
ADC 12-bit, up to 200 ksps
DAC 8-bit
Operational Amplifiers On-chip
Comparators On-chip
Digital I/O Pins 37
Timers 4 x 16-bit
UART 2
SPI 2
I²C 2
CCP/OC/PWM 3 x 16-bit
CLC Configurable Logic Cells
CTMU Charge Time Measurement Unit
PTG Peripheral Trigger Generator
PPS Peripheral Pin Select
XLP Technology Yes (eXtreme Low Power)
패키지 48-UQFN (MV) 6x6 mm
동작 온도 범위 -40C to +85C (Industrial, I grade)
실장 유형 Surface Mount

PIC24FV16KM204-I/MV 핀 구성

QFN-48 Package Pinout Diagram QFN-48 7x7mm, P0.5mm, EP 5.1x5.1mm, JEDEC MO-220. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 QFN-48
핀 1 RA0 — Digital I/O / analog input
핀 2 RA1 — Digital I/O / analog input
핀 3 RA2 — Digital I/O / analog input
핀 4 RA3 — Digital I/O / analog input / reference
핀 5 RA4 — Digital I/O / analog input
핀 6 RA5 — Digital I/O / analog input
핀 7 RA6 — Digital I/O / oscillator
핀 8 RA7 — Digital I/O / oscillator
핀 9 VSS — Ground
핀 10 RA8 — Digital I/O
핀 11 RA9 — Digital I/O
핀 12 RA10 — Digital I/O
핀 13 RA11 — Digital I/O
핀 14 RA12 — Digital I/O
핀 15 RA13 — Digital I/O
핀 16 RA14 — Digital I/O
핀 17 RA15 — Digital I/O
핀 18 VSS — Ground
핀 19 OSC1 — Crystal oscillator input
핀 20 OSC2 — Crystal oscillator output
핀 21 VDD — Supply voltage
핀 22 RB0 — Digital I/O / programming
핀 23 RB1 — Digital I/O / programming
핀 24 RB2 — Digital I/O
핀 25 RB3 — Digital I/O
핀 26 RB4 — Digital I/O
핀 27 RB5 — Digital I/O
핀 28 RB6 — Digital I/O
핀 29 RB7 — Digital I/O
핀 30 RB8 — Digital I/O
핀 31 RB9 — Digital I/O
핀 32 RB10 — Digital I/O
핀 33 RB11 — Digital I/O
핀 34 RB12 — Digital I/O
핀 35 RB13 — Digital I/O
핀 36 RB14 — Digital I/O
핀 37 RB15 — Digital I/O
핀 38 VSS — Ground
핀 39 RC0 — Digital I/O
핀 40 RC1 — Digital I/O
핀 41 RC2 — Digital I/O
핀 42 RC3 — Digital I/O
핀 43 RC4 — Digital I/O
핀 44 RC5 — Digital I/O
핀 45 RC6 — Digital I/O
핀 46 RC7 — Digital I/O
핀 47 RC8 — Digital I/O
핀 48 RC9 — Digital I/O

일반적인 애플리케이션

PIC24FV16KM204-I/MV 적합 용도: 7 애플리케이션s: Portable Medical Devices, Battery-Powered IoT Sensor Nodes, USB/HID Peripherals, Low-Cost Motor Drive Control, Industrial Sensor Conditioning, Capacitive Touch Interfaces, General-Purpose Embedded Control.

💊

Portable Medical Devices

The PIC24FV16KM204-I/MV fits portable medical devices because its XLP sleep current under 1 µA enables multi-year coin-cell operation on devices such as pulse oximeters, glucose meters, and digital thermometers. The 12-bit ADC sampling at up to 200 ksps provides sufficient resolution for biosignal front-ends, and the on-chip op amps amplify sensor signals without extra analog ICs, reducing BOM cost and PCB area. The 2.0-5.5 V supply range supports both 3 V coin cells and 5 V USB-powered designs in clinical environments.

🧩

Battery-Powered IoT Sensor Nodes

The PIC24FV16KM204-I/MV is purpose-built for battery-powered IoT sensor nodes thanks to XLP technology that delivers nanoamp sleep currents while preserving RTC and RAM retention. The integrated 12-bit ADC samples environmental sensors (temperature, humidity, light) directly, and the two UART/SPI/I²C peripherals connect radios such as LoRa, Sub-GHz, or BLE modules. The 16 KB Flash accommodates lightweight IPv6/6LoWPAN stacks or vendor-specific IoT firmware, and the 48-pin UQFN (MV, 6x6 mm) package fits sub-1 square-inch node PCBs.

📱

USB/HID Peripherals

The PIC24FV16KM204-I/MV serves USB/HID peripherals such as custom keyboards, mice, and game controllers where its 32 MIPS performance drives HID polling and on-device processing. The Peripheral Pin Select (PPS) mapper assigns USB D+/D- to any digital I/O, easing PCB routing, while the 16 KB Flash fits HID descriptors plus vendor-specific report logic. The 2.0-5.5 V range supports both bus-powered (5 V) and self-powered (3.3 V regulated) USB designs without external level shifters.

🏭

Low-Cost Motor Drive Control

The PIC24FV16KM204-I/MV drives low-cost brushed DC and stepper motors via its three 16-bit CCP/PWM modules with complementary outputs and programmable dead-band, supporting 6-step or sinusoidal commutation in firmware. The integrated op amps sense motor current through shunt resistors, while the 12-bit ADC samples back-EMF for sensorless control, eliminating external current-sense amplifiers. The wide 2.0-5.5 V range suits 3.3 V or 5 V motor-logic rails alongside separate motor supplies.

🏭

Industrial Sensor Conditioning

The PIC24FV16KM204-I/MV is ideal for industrial sensor conditioning front-ends where the integrated 12-bit ADC, op amps, DAC, and comparators implement transducer excitation, amplification, filtering, and thresholding on a single chip. The Peripheral Trigger Generator (PTG) sequences ADC conversions autonomously, freeing the core for communication tasks via UART/SPI/I²C to upstream PLCs or HMIs. The 48-pin UQFN (MV, 6x6 mm) package fits dense DIN-rail mounted signal-conditioning modules with industrial -40C to +85C temperature range.

💡

Capacitive Touch Interfaces

The PIC24FV16KM204-I/MV implements capacitive touch buttons and sliders using the on-chip Charge Time Measurement Unit (CTMU), which measures capacitance changes with sub-nanosecond resolution for reliable touch detection under humidity and glove conditions. The Configurable Logic Cells (CLC) generate custom timing waveforms without CPU intervention, and the 12-bit ADC provides redundant analog touch measurements. The 2.0-5.5 V range supports battery and USB-powered touch panels in appliances and consumer electronics.

🔧

General-Purpose Embedded Control

The PIC24FV16KM204-I/MV handles general-purpose embedded control tasks in appliance, building automation, and consumer electronics where its balanced peripheral mix replaces multiple discrete ICs. Two UART, two SPI, and two I²C interfaces support multi-bus topologies, while the 4 x 16-bit timers drive time-critical event sequencing. The Harvard bus architecture and 32 MIPS throughput deliver responsive control loops with predictable interrupt latency for real-time embedded firmware.

추천 제품 요약

PIC24FV32KM204-I/MV Same family, doubled Flash for richer firmware 사용처: Portable Medical Devices MCP9700 Analog temperature sensor companion 사용처: Portable Medical Devices RN2483 LoRaWAN transceiver companion 사용처: Battery-Powered IoT Sensor Nodes AT86RF233 2.4 GHz IEEE 802.15.4 radio 사용처: Battery-Powered IoT Sensor Nodes PIC24FJ64GA006-I/PT Microchip Technology 사용처: USB/HID Peripherals USB3300 USB 2.0 high-speed PHY companion 사용처: USB/HID Peripherals DRV8871 Integrated H-bridge motor driver companion 사용처: Low-Cost Motor Drive Control PIC18F25K22-I/SP Microchip Technology 사용처: Low-Cost Motor Drive Control MCP3421 External 18-bit ADC upgrade path 사용처: Industrial Sensor Conditioning PIC24EP512GU810 Microchip Technology 사용처: Industrial Sensor Conditioning AT42QT1010 Single-channel touch IC alternative 사용처: Capacitive Touch Interfaces PIC18F46K22-I/PT Microchip Technology 사용처: Capacitive Touch Interfaces PIC24FJ128GA106 Microchip Technology 사용처: General-Purpose Embedded Control MCP2515 External CAN controller upgrade path 사용처: General-Purpose Embedded Control
What is the operating voltage range of the PIC24FV16KM204-I/MV?
The PIC24FV16KM204-I/MV operates from 2.0 V to 5.5 V. According to the Microchip PIC24FV16KM204 family datasheet, the wide-range supply supports both single-cell lithium (3.6 V nominal) and 5 V rails, with the XLP variant drawing sleep currents under 1 µA typical for battery-backed designs.
How much flash and RAM does the PIC24FV16KM204-I/MV have?
The PIC24FV16KM204-I/MV integrates 16 KB (5.5K x 24) of Flash program memory, 2 KB of RAM, and 512 B of EEPROM. This combination targets sensor-conditioning and IoT edge-node firmware where on-chip analog peripherals reduce external component count and total BOM cost.
What package does the PIC24FV16KM204-I/MV use?
The PIC24FV16KM204-I/MV ships in a 48-pin UQFN package measuring 6x6 mm with an exposed thermal pad (package code MV). The compact UQFN-48 package enables dense PCB layouts while providing thermal and electrical ground integrity through the soldered thermal pad.
Where can I download the PIC24FV16KM204-I/MV datasheet PDF?
The official PIC24FV16KM204 family datasheet is hosted on Microchip's document server as DS30003030C.pdf. The Microchip product page (microchip.com/en-us/product/PIC24F16KM204) links to the same document, and third-party distributors such as Mouser and DigiKey also provide datasheet download links on their product pages.
What is the difference between PIC24FV16KM204-I/MV and PIC24F16KM204-I/MV?
The PIC24FV (F-V) prefix indicates the wide-voltage 2.0-5.5 V variant, while PIC24F16KM204 is the standard 1.8-3.6 V variant. Both share the same UQFN-48 (MV) pinout and peripheral set; the FV version is the drop-in choice for 5 V or battery-powered designs, while the F version suits 3.3 V-only systems.
What is the best drop-in replacement for the PIC24FV16KM204-I/MV?
The PIC24FV16KM204-I/MV has several same-package drop-in alternatives within the PIC24FV16KM family. The PIC24F16KM204-I/MV is the 1.8-3.6 V counterpart in the same UQFN-48 (MV) footprint; PIC24FV32KM204-I/MV doubles Flash to 32 KB on the same pins; PIC24FV08KM204-I/MV halves Flash to 8 KB. All four share identical pinout and peripheral mapping for direct PCB compatibility.
How much does the PIC24FV16KM204-I/MV cost and what is the lead time?
As of 2026-10-09, the PIC24FV16KM204-I/MV is priced from approximately $4.12 at 1-piece through $2.62 at 1,000-piece quantity breaks on DigiKey and Mouser. Both distributors list the part as in stock with same-day shipping; lead time for reel quantities above 1,000 typically runs 6-10 weeks factory-direct through Microchip.
What is the maximum ADC sample rate on the PIC24FV16KM204-I/MV?
The PIC24FV16KM204-I/MV integrates a 12-bit ADC capable of up to 200 ksps (kilosamples per second). Per the Microchip family datasheet, this throughput supports general-purpose sensor sampling, including temperature, voltage, and current sensing, without external ADC ICs in most embedded designs.
Can the PIC24FV16KM204-I/MV be used for low-power IoT designs?
Yes, the PIC24FV16KM204-I/MV is purpose-built for low-power IoT thanks to Microchip's XLP technology. Sleep currents are under 1 µA typical, retention currents are in the nanoamp range, and the integrated op amps and 12-bit ADC enable single-chip sensor-node designs that run for years on a coin cell.
How does the PIC24FV16KM204-I/MV compare to PIC24FV32KM204-I/MV?
The PIC24FV32KM204-I/MV doubles Flash to 32 KB while keeping RAM at 2 KB and sharing the same UQFN-48 (MV) footprint. For designs that need more code space for complex protocols or USB stacks, the PIC24FV32KM204-I/MV is the drop-in upgrade; the PIC24FV16KM204-I/MV remains the cost-optimized choice for compact sensor firmware.
Is the PIC24FV16KM204-I/MV suitable for automotive applications?
The PIC24FV16KM204-I/MV is the industrial-grade variant (-I, -40C to +85C), not AEC-Q100 qualified. For automotive designs, Microchip offers AEC-Q100-qualified PIC24F variants; verify the exact ordering code with the Microchip automotive product selector before specifying this part in vehicle electronics.
What development board should I use with the PIC24FV16KM204-I/MV?
The Microchip MPLAB X IDE supports the PIC24FV16KM204 family with the XC16 compiler. Recommended starter hardware includes the Curiosity Development Board (DM320104) or any Microchip Explorer 16/32-compatible board with a PIM for the PIC24 family. Both provide on-board programmers and break-out access to all 37 I/O pins.
What peripherals does the PIC24FV16KM204-I/MV integrate?
The PIC24FV16KM204-I/MV integrates two UART, two SPI, two I²C, four 16-bit timers, three 16-bit CCP/PWM modules, 12-bit ADC, 8-bit DAC, operational amplifiers, comparators, Configurable Logic Cells (CLC), CTMU for touch and time measurement, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing.
What is the pinout of the PIC24FV16KM204-I/MV?
The PIC24FV16KM204-I/MV uses a 48-pin UQFN (MV) package. Pin 1 is the indicator dot per the UQFN convention; complete pin assignments including VDD/VSS pairs, AVdd/AVss, oscillator pins, programming/debug pins, and I/O mapping are provided in the PIC24FV16KM204 family datasheet pinout tables and the package SVG diagram on this product page.
What is the key specification engineers should know about the PIC24FV16KM204-I/MV?
The PIC24FV16KM204-I/MV delivers 32 MIPS at 32 MHz, integrates 16 KB Flash, 2 KB RAM, 512 B EEPROM, and combines a 12-bit ADC, 8-bit DAC, op amps, comparators, CLC and PTG in a 48-pin UQFN (MV) 6x6 mm package. According to Microchip, this combination enables single-chip sensor-node and low-power IoT designs with on-chip analog conditioning, eliminating external ADC and op-amp ICs in most use cases.

엔지니어링 참조 데이터: PIC24FV16KM204-I/MV — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC24FV16KM204-I/MV when you need a 16-bit MCU with integrated analog front-end (op amps, 12-bit ADC, 8-bit DAC) and XLP deep-sleep below 1 µA in a compact 48-pin UQFN (MV, 6x6 mm) package. It is the drop-in choice for 2.0-5.5 V systems that need 16 KB Flash; step up to PIC24FV32KM204-I/MV if firmware grows beyond 16 KB, or step down to PIC24FV08KM204-I/MV if cost matters and code fits in 8 KB. For 3.3 V-only designs, PIC24F16KM204-I/MV is the lower-cost alternative in the same footprint. For richer DSP performance, the dsPIC33EV family is the upgrade path but requires a different package and external op amps.

대체품과의 비교

파라미터 이 제품 PIC24F16KM204-I/MV PIC24FV32KM204-I/MV PIC24FV08KM204-I/MV
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-UQFN (MV, 6x6 mm) 48-UQFN (MV, 6x6 mm) - same 48-UQFN (MV, 6x6 mm) - same 48-UQFN (MV, 6x6 mm) - same
Flash Memory 16 KB 16 KB - same 32 KB (+100%) 8 KB (-50%)
RAM 2 KB 2 KB - same 2 KB - same 2 KB - same
Operating Voltage Range 2.0 V to 5.5 V 1.8 V to 3.6 V (narrower) 2.0 V to 5.5 V - same 2.0 V to 5.5 V - same
Maximum CPU Speed 32 MIPS / 32 MHz 32 MIPS / 32 MHz - same 32 MIPS / 32 MHz - same 32 MIPS / 32 MHz - same
ADC 12-bit, 200 ksps 12-bit, 200 ksps - same 12-bit, 200 ksps - same 12-bit, 200 ksps - same
Digital I/O Pins 37 37 - same 37 - same 37 - same
XLP Low Power Yes Yes - same Yes - same Yes - same

주요 차별점

  • On-chip op amps + 12-bit ADC + 8-bit DAC in 48-pin UQFN (vs DSPIC33EV64GM104-I/PT)
  • XLP technology with sub-1 µA sleep current (vs PIC18F46K22-I/PT)
  • Wide 2.0-5.5 V supply in same footprint as 3.3 V variant (vs PIC24F16KM204-I/MV)

설계 노트

Place 0.1 µF and 1 µF decoupling capacitors within 5 mm of every VDD/VSS pin pair. According to Microchip's PIC24FV16KM204 family datasheet, the analog and digital supply pins (AVdd/AVss) require separate filtering from VDD/VSS to prevent ADC noise coupling; route AVdd from VDD via a ferrite bead and decouple with 10 µF + 0.1 µF. Estimated: input current at 32 MHz active mode is ~10 mA typical, so decoupling must handle sub-microsecond transient demands without voltage droop.

Solder the UQFN-48 thermal pad to a continuous ground plane with at least 8 thermal vias to inner ground layers. Estimated: at 32 MHz active and 5 V supply, power dissipation is approximately 50 mW worst case (10 mA × 5 V), yielding negligible junction-temperature rise, but the thermal pad is also the electrical ground return and must be soldered for signal integrity and EMC compliance.

Configure the Peripheral Pin Select (PPS) mapper in firmware before enabling peripherals; the PIC24FV16KM204 family datasheet warns that peripherals default to disabled states and incorrect PPS unlock sequences can lock the device, requiring a power cycle to recover. Route the 32 MHz crystal traces on the top layer with short, symmetric lengths to OSC1/OSC2 and guard them with a ground pour to minimize EMI.

Do not exceed 5.5 V on any VDD pin; the PIC24FV (wide-voltage) variant supports up to 5.5 V, but the F variant without V tops out at 3.6 V. Use the ICSP programming pins (RB0/RB1) only after disabling PPS on those pins in firmware, otherwise in-circuit programming will fail. The CTMU requires calibration against a known reference capacitor before touch measurements will be reliable.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
무연
Yes
무할로겐
Yes
분쟁 광물
Compliant

Industrial temperature grade -40C to +85C (I suffix). Not AEC-Q100 qualified; choose PIC24F automotive-grade variants for vehicle applications.

데이터 검증일: 2026-10-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC24FV16KM204-I/MV PIC24FV16KM204-I/MV datasheet Microchip PIC24FV16KM204 16-bit XLP MCU 48-UQFN PIC24F 16KB Flash microcontroller UQFN PIC24FV16KM204-I/MV low power IoT sensor PIC24FV16KM204 vs PIC24F16KM204 PIC24FV16KM204 drop-in replacement UQFN-48 buy PIC24FV16KM204-I/MV PIC24FV16KM204 pinout 48-UQFN MV what is XLP technology Microchip PIC24FV16KM204 USB HID firmware

관련 부품 & 용어

Microchip Technology PIC24FV16KM204 PIC24FV16KM204-I/MV PIC24F16KM204-I/MV PIC24FV32KM204-I/MV PIC24FV08KM204-I/MV dsPIC33EV64GM104-I/PT Microcontroller (MCU) 16-bit MCU PIC24F family DSP-enhanced architecture XLP technology eXtreme Low Power 12-bit ADC 8-bit DAC Operational amplifier (op-amp) Configurable Logic Cell (CLC) Peripheral Trigger Generator (PTG) Peripheral Pin Select (PPS) Charge Time Measurement Unit (CTMU) 48-UQFN package QFN family surface mount technology (SMT) RoHS compliance AEC-Q100 sensor conditioning IoT edge node USB HID peripheral industrial microcontroller
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기