PIC24HJ64GP206-I/PT - 40 MIPS 16-bit MCU 64KB Flash TQFP-64 | Microchip
부품 번호: PIC24HJ64GP206-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.76 | $9.76 |
| 10 | $8.84 | $88.40 |
| 100 | $7.32 | $732.00 |
| 500 | $6.18 | $3,090.00 |
| 1,000 | $5.42 | $5,420.00 |
PIC24HJ64GP206-I/PT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals on one die. Within the broader semiconductor taxonomy, an MCU belongs to the integrated circuit family, sits under the embedded processor hierarchy, and is differentiated from microprocessors (MPUs) by its on-chip Flash and peripherals. The PIC24H is a 16-bit Harvard-architecture MCU positioned between the 8-bit PIC18 family and the 16-bit dsPIC33F DSP-capable family, offering seamless migration paths from/to PIC24F, dsPIC30F and dsPIC33F devices.
Key features include 64 KB (22K x 24) Flash program memory organized as instruction words, 8 KB SRAM, a 40 MHz maximum clock speed yielding 40 MIPS throughput, and a 12-bit A/D converter with up to 16 input channels. The device integrates multiple UART, SPI, I2C peripherals, DMA channels, and a built-in RTCC for calendar and timestamping. An integrated 16-bit timer/counter block supports PWM generation critical for motor control, while the 53 I/O pins tolerate 5 V digital inputs.
The architecture uses a 16-bit modified Harvard design with separate program and data buses plus a 24-bit instruction word optimized for code density. The CPU executes most instructions in a single cycle, achieving 40 MIPS throughput at 40 MHz, while the integrated DMA controller offloads peripheral data movement from the CPU, freeing MIPS for control loops and signal processing. C code compiled with MPLAB XC16 runs at full instruction-cycle efficiency.
Typical applications include industrial BLDC/PMSM/stepper motor control, digital power conversion, advanced sensor interfacing, predictive maintenance edge nodes, and general-purpose embedded control requiring deterministic 16-bit computation. Engineers select this part where dsPIC33F DSP capability is not required but 16-bit performance exceeds PIC18 capability.
When designing, ensure adequate decoupling on VDD/AVDD pairs (100 nF + 1 uF typical), use the dedicated VCAP pin for the internal voltage regulator with the manufacturer-specified 10 uF capacitor, and reserve the 11 dedicated pins for supply, programming, and oscillator functions. A JTAG or ICSP programming header should be brought out for in-circuit firmware updates.
This page synthesizes distributor pricing, drop-in PIC24H alternatives, and practical design notes that the manufacturer datasheet alone does not present, providing a one-stop engineering reference.
드롭인 대체품: PIC24HJ64GP206-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24HJ64GP206-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, I2C, Maximum CPU Speed, Package, SPI.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24HJ64GP206A-I/PT
✅ 드롭인✓ 재고 있음
$2.94 / 개
데이터시트 보기 →PIC24HJ64GP206-I/PT
✅ 드롭인✓ 재고 있음
$5.42 / 개
데이터시트 보기 →dsPIC33FJ64GP206-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24HJ64GP206-E/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33EV64GM106-I/PT
✅ 드롭인✓ 재고 있음
$3.3 / 개
데이터시트 보기 →PIC24HJ64GP206-I/PT 최대 정격 & 전기적 특성
| Core Architecture | 16-bit PIC24H Harvard |
| Maximum CPU Speed | 40 MIPS at 40 MHz |
| Program Memory (Flash) | 64 KB (22K x 24 instruction words) |
| Data Memory (SRAM) | 8 KB |
| Operating Voltage Range | 3.0 V to 3.6 V |
| 동작 온도 범위 | -40 C to +85 C (Industrial) |
| I/O Pins | 53 |
| ADC | 12-bit, up to 16 channels |
| Timers | 16-bit, 5 channels |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 1 module |
| DMA Channels | 8 |
| 패키지 | 64-pin TQFP (PT) 10x10 mm |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
PIC24HJ64GP206-I/PT 핀 구성
| 핀 1 | RA0 — Analog/Digital I/O; AN0; CN2 |
| 핀 2 | RA1 — Analog/Digital I/O; AN1; CN3 |
| 핀 3 | RA2 — Analog/Digital I/O; AN2; CN30 |
| 핀 4 | RA3 — Analog/Digital I/O; AN3; CN29 |
| 핀 5 | RA4 — Analog/Digital I/O; AN4; CN3 |
| 핀 6 | AVDD — Analog VDD (+3.3V) |
| 핀 7 | AVSS — Analog Ground |
| 핀 8 | RA5 — Analog/Digital I/O; AN5; CN5 |
| 핀 9 | RA6 — Digital I/O; OSC2/CLKO |
| 핀 10 | RA7 — Digital I/O; OSC1/CLKI |
| 핀 11 | RB0 — Digital I/O; PGED1; AN6 |
| 핀 12 | RB1 — Digital I/O; PGEC1; AN7 |
| 핀 13 | RB2 — Digital I/O; AN8; CN6 |
| 핀 14 | RB3 — Digital I/O; AN9; CN7 |
| 핀 15 | RB4 — Digital I/O; AN10; CN1 |
| 핀 16 | RB5 — Digital I/O; AN11; CN4 |
| 핀 17 | RB6 — Digital I/O; PGEC2; AN12 |
| 핀 18 | RB7 — Digital I/O; PGED2; AN13 |
| 핀 19 | RC1 — Digital I/O; AN14 |
| 핀 20 | RC2 — Digital I/O; AN15 |
| 핀 21 | RC3 — Digital I/O; AN16 |
| 핀 22 | RC4 — Digital I/O; AN17 |
| 핀 23 | RC5 — Digital I/O |
| 핀 24 | RC6 — Digital I/O |
| 핀 25 | RC7 — Digital I/O |
| 핀 26 | RC8 — Digital I/O |
| 핀 27 | RC9 — Digital I/O |
| 핀 28 | MCLR — Master Clear / Reset input |
| 핀 29 | VDD — Digital VDD (+3.3V) |
| 핀 30 | VSS — Digital Ground |
| 핀 31 | RD0 — Digital I/O |
| 핀 32 | RD1 — Digital I/O |
| 핀 33 | RD2 — Digital I/O |
| 핀 34 | RD3 — Digital I/O |
| 핀 35 | RD4 — Digital I/O |
| 핀 36 | RD5 — Digital I/O |
| 핀 37 | RD6 — Digital I/O |
| 핀 38 | RD7 — Digital I/O |
| 핀 39 | RF0 — Digital I/O |
| 핀 40 | RF1 — Digital I/O |
| 핀 41 | RF2 — Digital I/O |
| 핀 42 | RF3 — Digital I/O |
| 핀 43 | RF4 — Digital I/O |
| 핀 44 | RF5 — Digital I/O |
| 핀 45 | RF6 — Digital I/O |
| 핀 46 | RF7 — Digital I/O |
| 핀 47 | RG0 — Digital I/O |
| 핀 48 | RG1 — Digital I/O |
| 핀 49 | RG2 — Digital I/O |
| 핀 50 | RG3 — Digital I/O |
| 핀 51 | RG6 — Digital I/O |
| 핀 52 | RG7 — Digital I/O |
| 핀 53 | RG8 — Digital I/O |
| 핀 54 | RG9 — Digital I/O |
| 핀 55 | VCAP — Internal voltage regulator bypass (10 uF to VSS) |
| 핀 56 | VDD — Digital VDD (+3.3V) |
| 핀 57 | VSS — Digital Ground |
| 핀 58 | RE0 — Digital I/O |
| 핀 59 | RE1 — Digital I/O |
| 핀 60 | RE2 — Digital I/O |
| 핀 61 | RE3 — Digital I/O |
| 핀 62 | RE4 — Digital I/O |
| 핀 63 | RE5 — Digital I/O |
| 핀 64 | RE6 — Digital I/O |
일반적인 애플리케이션
PIC24HJ64GP206-I/PT 적합 용도: 7 애플리케이션s: BLDC / PMSM Motor Control, Digital Power Conversion (SMPS), Industrial Sensor Interface, Predictive Maintenance Edge Node, General-Purpose 16-bit Embedded Control, Building Automation and HVAC Control, Renewable Energy / Solar Inverter Control.
BLDC / PMSM Motor Control
The PIC24HJ64GP206-I/PT runs sensorless and sensored BLDC field-oriented control (FOC) loops at 10 to 20 kHz thanks to its 40 MIPS throughput. Its 16-bit timers and PWM module drive three-phase inverter switches directly, while the 12-bit ADC samples phase currents synchronously to PWM via DMA, offloading the CPU. This combination delivers the deterministic 16-bit math motor control requires without stepping up to a dsPIC33F DSP engine.
추천
Digital Power Conversion (SMPS)
The PIC24HJ64GP206-I/PT controls digital switch-mode power supplies up to several hundred kHz switching frequency, executing peak current-mode control and voltage-mode control loops in firmware. Its 40 MIPS throughput handles high-resolution PID loops, while the 12-bit ADC samples the current shunt and output voltage synchronously to the PWM edge. Designers use the DMA controller to capture ADC samples without CPU intervention, preserving MIPS for control law computation.
추천
Industrial Sensor Interface
The PIC24HJ64GP206-I/PT integrates 16 channels of 12-bit ADC for multi-sensor acquisition in industrial instrumentation, including temperature, pressure, and flow sensors. Its 5V-tolerant digital inputs interface to legacy industrial logic, while the UART, SPI, and I2C peripherals communicate with sensor front-ends. The 8 KB SRAM buffers streaming ADC data for averaging or FFT analysis, and the 64 KB Flash stores calibration tables and protocol libraries.
추천
Predictive Maintenance Edge Node
The PIC24HJ64GP206-I/PT enables edge-node predictive maintenance by sampling vibration, current, and temperature sensors at high rates and computing RMS, FFT, and envelope analysis in firmware. Its 40 MIPS throughput is sufficient for windowed FFT on streaming sensor data, while 8 KB SRAM buffers time-domain samples before transformation. The integrated RTCC timestamps events for cloud upload over UART-to-WiFi bridges.
추천
General-Purpose 16-bit Embedded Control
The PIC24HJ64GP206-I/PT serves as a drop-in upgrade for 8-bit PIC18 designs that need deterministic 16-bit performance without a full migration to a 32-bit platform. Its MPLAB X toolchain compatibility with PIC18 code eases firmware reuse, while the 64 KB Flash and 8 KB SRAM support richer feature sets including USB device stacks, Modbus RTU, and graphical user interfaces. The TQFP-64 footprint is hand-solderable for prototyping and low-volume production.
추천
Building Automation and HVAC Control
The PIC24HJ64GP206-I/PT drives HVAC damper and valve actuators, reads analog temperature and humidity sensors, and communicates over BACnet or Modbus to building management systems. Its 5V-tolerant I/O interfaces to 24V industrial sensors via external resistor dividers. The DMA controller offloads sensor polling from the CPU, freeing MIPS for PID loop execution on each control zone.
추천
Renewable Energy / Solar Inverter Control
The PIC24HJ64GP206-I/PT executes MPPT (Maximum Power Point Tracking) algorithms on solar inverters and MPPT charge controllers, sampling panel voltage and current at high rates and adjusting the converter duty cycle. Its 40 MIPS throughput handles perturb-and-observe or incremental conductance MPPT, while the 12-bit ADC measures panel characteristics with 1 mV resolution. The 5V-tolerant I/O interfaces directly to MOSFET gate drivers for the power stage.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24HJ64GP206-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24HJ64GP206A-I/PT | PIC24HJ64GP206-E/PT | dsPIC33FJ64GP206-I/PT | DSPIC33EV64GM106-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same |
| Core Architecture | 16-bit PIC24H (Harvard) | 16-bit PIC24H (Harvard) | 16-bit PIC24H (Harvard) | 16-bit dsPIC33F DSP | 16-bit dsPIC33EV DSP |
| Maximum CPU Speed | 40 MIPS @ 40 MHz | 40 MIPS @ 40 MHz | 40 MIPS @ 40 MHz | 40 MIPS @ 40 MHz | 70 MIPS @ 70 MHz |
| Program Flash | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Data SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| ADC | 12-bit, 16 ch | 12-bit, 16 ch | 12-bit, 16 ch | 12-bit, 16 ch | 12-bit, 22 ch |
| DSP Engine | No | No | No | Yes (DSP engine + 40-bit accumulators) | Yes (DSP engine + 40-bit accumulators) |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
주요 차별점
- Pin-compatible DSP migration path to dsPIC33F (vs dsPIC33FJ64GP206-I/PT)
- Extended temperature grade available in same package (vs PIC24HJ64GP206-E/PT)
- Modern 5V-tolerant peripherals via dsPIC33EV family (vs DSPIC33EV64GM106-I/PT)
설계 노트
Place a 10 uF ceramic capacitor on the VCAP pin (pin 55) to stabilize the internal 2.5 V core LDO. Add 100 nF + 1 uF decoupling pairs on each VDD/AVDD pair (pins 6/29/56) within 5 mm of the package. Bulk input capacitance of 4.7 uF to 10 uF on the 3.3 V rail suppresses transients during PWM switching events. Use separate analog and digital ground planes joined at a single point under the MCU.
Route the 40 MHz crystal traces (OSC1/OSC2, pins 9/10) as short, symmetric pairs with a ground guard ring to minimize EMI pickup. Keep analog ADC traces away from PWM and digital switching signals; place the 12-bit ADC reference capacitor (0.1 uF) within 5 mm of the AVREF pin. Use a 4-layer PCB with a dedicated ground plane for the analog and digital sections to achieve optimal ADC performance.
Do not omit the VCAP bypass capacitor - the internal regulator will oscillate and cause erratic resets. Ensure MCLR (pin 28) has a 10 kohm pull-up to VDD and a 100 nF decoupling cap to ground for in-circuit reset stability. Reserve PGED1/PGEC1 (pins 11/12) or PGED2/PGEC2 (pins 17/18) for ICSP programming and bring them to a header for firmware updates.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. Industrial temperature grade only - AEC-Q100 qualified parts use the PIC24HJ64GP206A-I/PT automotive variant. Pb-free and halogen-free per Microchip material declarations.
