PIC32MM0016GPL020-E/SS - 32-bit MCU, 16KB Flash, 25MHz | Microchip
부품 번호: PIC32MM0016GPL020-E/SS ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.85 | $1.85 |
| 10 | $1.66 | $16.60 |
| 100 | $1.48 | $148.00 |
| 500 | $1.32 | $660.00 |
| 1,000 | $1.18 | $1,180.00 |
PIC32MM0016GPL020-E/SS 개요
What is a PIC32MM microcontroller? PIC32MM belongs to the 32-bit microcontroller (MCU) category within the broader hierarchy of microcontrollers -> microprocessors -> ICs -> semiconductors. The PIC32MM GPL specifically is the eXtreme Low Power (XLP) sub-family that adds sub-microamp deep-sleep modes down to 500 nA, designed to extend battery life in always-on IoT endpoints. It uses the MIPS32 microAptiv Unified Core (UC) which supports the microMIPS compressed instruction set, delivering 79 CoreMark at 25 MHz while maintaining code density comparable to 16-bit cores.
Key features of the PIC32MM0016GPL020-E/SS include 16 KB (16K x 8) Flash program storage, 4 KB SRAM, an integrated 79 CoreMark/25 MHz performance, and ultra-low-power modes with sleep currents as low as 500 nA. The 20-pin SSOP package provides a compact footprint suitable for hand-held and wearable designs, and the -E temperature grade extends operating range from -40C to +125C for industrial environments.
Technical depth: the device is built around the MIPS32 microAptiv UC pipeline with hardware multiply/divide and a microMIPS ISA extension that effectively doubles code density compared with standard MIPS32. On-chip peripherals include multiple 16-bit timers, a 10-bit 200 ksps ADC, comparators, UART/SPI/I2C, and a configurable logic cell. The 2.3V-3.6V single-supply operation simplifies power tree design, while the XLP regulator enables deep-sleep retention with sub-microamp draw.
Typical applications: low-power IoT sensor nodes, battery-powered wireless remote controls, wearable health monitors, industrial HMI button/keypad controllers, and small home appliances where 32-bit performance, ultra-low sleep current, and minimal PCB area are critical.
Design consideration: leverage the XLP sleep modes aggressively in polling applications - a 500 nA sleep current lets a CR2032 coin cell run for years rather than months. For deterministic response, use the deep-sleep wake source from the RTCC or an external interrupt rather than the WDT.
This page synthesizes distributor pricing, drop-in same-package alternatives, application recommendations, and design notes beyond the manufacturer datasheet, giving engineers a single resource for part selection, sourcing, and PCB-level design guidance.
드롭인 대체품: PIC32MM0016GPL020-E/SS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MM0016GPL020-E/SS (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Operating Temperature, Sleep Current (XLP), Instruction Set.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MM0016GPL020-I/SS
✅ 드롭인✓ 재고 있음
$1.1 / 개
데이터시트 보기 →PIC32MM0032GPL020-I/SS
✅ 드롭인✓ 재고 있음
$1.45 / 개
데이터시트 보기 →PIC32MM0032GPL020-E/SS
✅ 드롭인✓ 재고 있음
$0.89 / 개
데이터시트 보기 →PIC32MM0064GPL020-E/SS
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MM0064GPL020-I/SS
✅ 드롭인✓ 재고 있음
$1.78 / 개
데이터시트 보기 →PIC32MM0016GPL020-E/SS 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 microAptiv UC |
| Instruction Set | microMIPS (compressed MIPS32) |
| CoreMark Score | 79 at 25 MHz |
| Maximum CPU Clock | 25 MHz |
| 데이터 버스 폭 | 32-bit |
| Program Memory (Flash) | 16 KB (16K x 8) |
| SRAM | 4 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Operating Temperature Range (E grade) | -40C to +125C |
| Sleep Current (XLP) | 500 nA typical |
| 패키지 | 20-pin SSOP |
| 핀 수 | 20 |
| 실장 유형 | Surface Mount |
| ADC | 10-bit, 200 ksps |
| Communication Interfaces | UART, SPI, I2C |
| Timers | Multiple 16-bit |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
PIC32MM0016GPL020-E/SS 핀 구성
| 핀 1 | MCLR — Master Clear (reset) input, active-low |
| 핀 2 | RA0 — Port A bit 0 / analog input / ICSPDAT |
| 핀 3 | RA1 — Port A bit 1 / analog input / ICSPCLK |
| 핀 4 | RB0 — Port B bit 0 / analog input / PGED1 |
| 핀 5 | RB1 — Port B bit 1 / analog input / PGEC1 |
| 핀 6 | RB2 — Port B bit 2 / analog input |
| 핀 7 | RB3 — Port B bit 3 / analog input |
| 핀 8 | VSS — Ground reference |
| 핀 9 | OSC1 — Oscillator input / external clock |
| 핀 10 | OSC2 — Oscillator output |
| 핀 11 | RB4 — Port B bit 4 / analog input |
| 핀 12 | RB5 — Port B bit 5 / analog input |
| 핀 13 | RB6 — Port B bit 6 / analog input |
| 핀 14 | RB7 — Port B bit 7 / analog input |
| 핀 15 | RA2 — Port A bit 2 / analog input |
| 핀 16 | RA3 — Port A bit 3 / analog input / VREF+ |
| 핀 17 | RA4 — Port A bit 4 / analog input |
| 핀 18 | RB8 — Port B bit 8 / SCL1 |
| 핀 19 | RB9 — Port B bit 9 / SDA1 |
| 핀 20 | VDD — Positive supply voltage (2.3V to 3.6V) |
일반적인 애플리케이션
PIC32MM0016GPL020-E/SS 적합 용도: 6 애플리케이션s: Battery-Powered IoT Sensor Node, Wearable Health Monitor, Wireless Remote Control (RF TX-only), Industrial HMI Button/Keypad Controller, Small Home Appliance Controller, Portable Test and Measurement Probe.
Battery-Powered IoT Sensor Node
The PIC32MM0016GPL020-E/SS is well-suited to ultra-low-power wireless sensor nodes where the 500 nA XLP sleep current dominates target, up to 25 MHz MIPS32 performance, and a 10-bit 200 ksps ADC for periodic sensor sampling. Its 16 KB Flash via microMIPS gives compact code density for BLE/Zigbee stack footprints in endpoints. Designers place the MCU between a CR2032 or 2xAA battery and a sensor front-end, using RTCC or external interrupt wake to duty-cycle the radio. The 20-pin SSOP keeps the BOM small, while the eXtreme Low Power regulator enables years-long battery life in intermittently-active deployments.
추천
Wearable Health Monitor
Wearable fitness bands and pulse-oximeter patches benefit from the PIC32MM0016GPL020-E/SS's 500 nA sleep current, compact 20-pin SSOP package, and 32-bit microAptiv core that handles BLE beaconing and sensor fusion. The on-chip 10-bit ADC reads photodiode or bio-impedance signals directly, while UART/I2C links to a companion BLE SoC. microMIPS code density keeps the 16 KB Flash budget for application firmware while leaving bootloader headroom. The -40C to +125C grade tolerates body-heat and skin-contact thermal rise, and the XLP deep-sleep retention preserves RTC time across multi-day wear cycles.
추천
Wireless Remote Control (RF TX-only)
Coin-cell-powered garage openers, key fobs, and TV remote controls leverage the PIC32MM0016GPL020-E/SS's sub-microamp sleep, fast 25 MHz wake-up, and 16 KB Flash for button-matrix scanning and encrypted rolling-code protocols. The 20-pin SSOP fits the slim enclosure while leaving GPIO for IR LED, RF TX enable, and 8-12 keys. microMIPS compression fits state machines and AES helpers inside 16 KB, eliminating external memory. Designers duty-cycle the radio at <1% with RTCC wake, achieving 5+ year battery life on CR2032 in typical 10-30 press/day usage profiles.
추천
Industrial HMI Button/Keypad Controller
Factory-floor keypads and small HMIs use the PIC32MM0016GPL020-E/SS to scan 4x4 to 8x8 matrices, debounce inputs, drive LED indicators, and report via UART/I2C to a host PLC. The -40C to +125C E-grade tolerates cabinet thermal rise, while the 32-bit microAptiv runs capacitive-touch firmware and CAN-aware pre-processors. The 20-pin SSOP suits compact panel-mount PCAs, and the 16 KB Flash holds multi-layer debounce, ghosting detection, and IO-Link-like protocol stacks. The 10-bit ADC reads potentiometers or analog front-panel sensors in the same scan loop.
추천
Small Home Appliance Controller
Coffee makers, air purifiers, and smart plugs use the PIC32MM0016GPL020-E/SS for low-cost 32-bit control of triac-driven heater elements, PWM fan motors, and OLED status displays. The 25 MHz core handles control loops, while 16 KB Flash holds UI state machines and BLE pairing logic. The 10-bit ADC reads temperature, humidity, and current-sensing shunts for closed-loop regulation. SSOP-20 keeps the BOM tiny for sub-$5 retail designs, and XLP sleep modes cut standby power below 0.5 mW, helping meet Energy Star idle budgets without a separate power MCU.
추천
Portable Test and Measurement Probe
Handheld multimeter probes, logic-tester pens, and low-cost oscilloscope front-ends use the PIC32MM0016GPL020-E/SS for signal conditioning, ADC capture, and USB-CDC result streaming to a host. The 32-bit core handles 10 ksps to 200 ksps sampling, while microMIPS compression fits DSP-style FIR filters inside 16 KB. The 20-pin SSOP supports an analog MUX, op-amp gain stage, and OLED display in a slim probe enclosure. E-grade thermal tolerance suits automotive garage environments where -40C cold-start and +85C under-hood operation are routine.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MM0016GPL020-E/SS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MM0016GPL020-I/SS | PIC32MM0032GPL020-I/SS | PIC32MM0032GPL020-E/SS | PIC32MM0064GPL020-E/SS | PIC32MM0064GPL020-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same |
| Core | MIPS32 microAptiv UC, 32-bit | MIPS32 microAptiv UC, 32-bit | MIPS32 microAptiv UC, 32-bit | MIPS32 microAptiv UC, 32-bit | MIPS32 microAptiv UC, 32-bit | MIPS32 microAptiv UC, 32-bit |
| Max CPU Clock | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Flash Program Memory | 16 KB | 16 KB | 32 KB | 32 KB | 64 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
| XLP Sleep Current | 500 nA typical | 500 nA typical | 500 nA typical | 500 nA typical | 500 nA typical | 500 nA typical |
주요 차별점
- Extended -40C to +125C temperature grade in 20-pin SSOP (vs PIC32MM0016GPL020-I/SS)
- Lowest-power 32-bit MCU footprint option in 20-pin SSOP (vs PIC32MM0032GPL020-E/SS)
- microMIPS code density doubles effective Flash capacity (vs PIC24FJ128-series 16-bit MCUs)
설계 노트
Estimated: at VDD=3.0V and 25 MHz active, typical active current is approximately 5 mA per the PIC32MM GPL family datasheet (exact figure not provided in the verified data). For battery designs, exploit the XLP sleep mode at 500 nA typical - a CR2032 (~220 mAh) running 1% duty cycle at 5 mA active yields roughly 4 years of theoretical life. Add a 100 nF ceramic decoupling capacitor within 5 mm of VDD and a 10 uF bulk cap at the regulator input.
Route the ICSP pair (PGED1/PGEC1 on RB0/RB1) to a 2x3 0.1 inch header so the production board remains in-circuit programmable. Keep OSC1/OSC2 traces short and symmetric if using a crystal; for low-cost designs a 32.768 kHz crystal on SOSCO/SOSCI enables RTCC-based sleep wake. Use a star-ground topology with VSS pin 8 connected directly to the ground pour to minimize digital switching noise coupling into analog inputs.
Do not exceed 3.6 V on any pin including MCLR; add a 10 kohm pull-up and a clamping diode if the MCLR line is exposed to an external connector. The -E temperature grade differs from -I only in upper limit (+125C vs +85C); verify the application thermal budget before substituting. The 16 KB Flash variant fills quickly when adding Bluetooth stacks - plan firmware size budget and consider PIC32MM0032GPL020-E/SS as a same-footprint upgrade path.
규정 준수 정보
RoHS and lead-free compliant per Microchip product page. Not AEC-Q100 qualified; the -E temperature grade denotes industrial extended range, not automotive qualification. For automotive designs, look to PIC32MK or PIC32CM families.
